13 files changed, 1610 insertions, 0 deletions
diff --git a/etc/private/install/brep-apache2.conf b/etc/private/install/brep-apache2.conf
new file mode 100644
index 0000000..99186d1
--- /dev/null
+++ b/etc/private/install/brep-apache2.conf
@@ -0,0 +1,99 @@
+# Keep in the main server configuration context. This way the directive will
+# be in effect during module initialization and request handling.
+#
+# Note that initialization log messages are written to the main server log
+# file (/var/log/apache2/error.log), and request handling messages to the
+# virtual server log file (/var/www/brep/log/error.log).
+#
+LogLevel brep:info
+
+<VirtualHost *:80>
+  #ServerName <brep-hostname>
+  #ServerAdmin <brep-admin-email>
+
+  #DocumentRoot /var/www/brep/public
+  #Options +Indexes
+
+  AddOutputFilterByType DEFLATE application/xhtml+xml
+  AddOutputFilterByType DEFLATE text/manifest
+  AddOutputFilterByType DEFLATE text/plain
+  AddOutputFilterByType DEFLATE text/css
+
+  Alias "/1" "/var/brep/bpkg/pkg/1"
+
+  ErrorLog /var/www/brep/log/error.log
+  CustomLog /var/www/brep/log/access.log combined
+
+  # brep configuration
+  #
+
+  # Load the brep module.
+  #
+  <IfModule !brep_module>
+    LoadModule brep_module /home/brep/install/libexec/brep/mod_brep.so
+  </IfModule>
+
+  # Repository email. This email is used for the From: header in emails send
+  # by brep (for example, build failure notifications).
+  #
+  #brep-email <brep-admin-email>
+
+  # Repository host. It specifies the scheme and the host address (but not the
+  # root path; see brep-root below) that will be used whenever brep needs to
+  # construct an absolute URL to one of its locations (for example, a link to
+  # a build log that is being send via email).
+  #
+  #brep-host http://<brep-hostname>
+
+  # Repository root. This is the part of the URL between the host name and the
+  # start of the repository. For example, root value /pkg means the repository
+  # URL is http://example.org/pkg/. Specify / to use the web server root
+  # (e.g., http://example.org/). If using a different repository root, don't
+  # forget to also change Location and Alias directives below.
+  #
+  brep-root /
+
+  <Location "/">
+    SetHandler brep
+
+    <IfModule dir_module>
+      DirectoryIndex disabled
+      DirectorySlash Off
+    </IfModule>
+  </Location>
+
+  # Brep module configuration. If you prefer, you can paste the contents of
+  # this file here. However, you will need to prefix every option with
+  # 'brep-'.
+  #
+  brep-conf /home/brep/config/brep-module.conf
+
+  # Static brep content (CSS files).
+  #
+  <IfModule !alias_module>
+    Error "mod_alias is not enabled"
+  </IfModule>
+
+  # Note: trailing slashes are important!
+  #
+  Alias /@/ /home/brep/install/share/brep/www/
+
+  <Directory "/home/brep/install/share/brep/www">
+    Require all granted
+  </Directory>
+
+  # brep config override (must come after).
+  #
+  <LocationMatch "^/([0-9]|icons)(/.*)?$">
+    SetHandler none
+
+    DirectoryIndex enabled
+    DirectorySlash On
+  </LocationMatch>
+</VirtualHost>
+
+<Directory /var/brep/bpkg/pkg/>
+  Options Indexes FollowSymLinks
+  AllowOverride None
+  Require all granted
+</Directory>
diff --git a/etc/private/install/brep-install b/etc/private/install/brep-install
new file mode 100755
index 0000000..0c6c2e6
--- /dev/null
+++ b/etc/private/install/brep-install
@@ -0,0 +1,433 @@
+#! /usr/bin/env bash
+
+# file      : etc/private/install/brep-install
+# license   : MIT; see accompanying LICENSE file
+
+# Setup HTTP-only brep instance with unsigned package submission support via
+# direct repository publishing (brep/handler/submit/submit-pub).
+#
+# NOTE: this setup should only be used in private/trusted environments.
+#
+# Unless the --setup option is specified, create the 'brep' group and user and
+# re-run itself with the --setup option under this user. In the setup mode
+# install and configure the brep instance, automating the instructions from
+# the INSTALL file, including:
+#
+# - Build the build2 toolchain (installing it to /usr/local/) and brep
+#   (installing it to ~brep/install/).
+#
+# - Install PostgreSQL and create brep users/databases.
+#
+# - Installing Apache2 and configure HTTP server with the brep module.
+#
+# Note that the script is written for use on Debian-based distributions so you
+# will need to adjust it to match other distributions or operating systems.
+#
+# Options:
+#
+# --mount
+#
+#   Mount the virtio-9p device with id 'state' as the /var/brep directory.
+#   This directory is expected to either contain the pkg repository or be
+#   empty, in which case an empty repository will be automatically
+#   initialized. If this option is unspecified, the directory will be created
+#   in the local filesystem.
+#
+# --brep-user
+#
+#   User and group ids to use when creating the 'brep' group and user. If
+#   unspecified, 63700 is used.
+#
+# --setup
+#
+#   Install and configure the brep instance, assuming that the 'brep' user
+#   already exists and this script is executed as this user.
+#
+usage="Usage: $0 [<options>]"
+
+# build2 toolchain repository certificate fingerprint. Note: this is a
+# repository the toolchain installation script downloads the build2 packages
+# from.
+#
+toolchain_repo_cert_fp="86:BA:D4:DE:2C:87:1A:EE:38:C7:F1:64:7F:65:77:02:15:79:F3:C4:83:C0:AB:5A:EA:F4:F7:8C:1D:63:30:C6"
+#toolchain_repo_cert_fp="37:CE:2C:A5:1D:CF:93:81:D7:07:46:AD:66:B3:C3:90:83:B8:96:9E:34:F0:E7:B3:A2:B0:6C:EF:66:A4:BE:65"
+
+# brep package repository URL and certificate fingerprint.
+#
+#brep_repo_url="https://pkg.cppget.org/1/alpha"
+#brep_repo_cert_fp="86:BA:D4:DE:2C:87:1A:EE:38:C7:F1:64:7F:65:77:02:15:79:F3:C4:83:C0:AB:5A:EA:F4:F7:8C:1D:63:30:C6"
+brep_repo_url="https://stage.build2.org/1"
+brep_repo_cert_fp="37:CE:2C:A5:1D:CF:93:81:D7:07:46:AD:66:B3:C3:90:83:B8:96:9E:34:F0:E7:B3:A2:B0:6C:EF:66:A4:BE:65"
+
+owd=`pwd`
+trap "{ exit 1; }"  ERR
+trap "{ cd $owd; }" EXIT
+set -o errtrace # Trap in functions.
+
+function info  () { echo "$*" 1>&2; }
+function error () { info "error: $*"; exit 1; }
+
+# Trace a command line, quoting empty arguments as well as those that contain
+# spaces.
+#
+function trace () # <cmd> <arg>...
+{
+  local s="+"
+  while [ "$#" -gt 0 ]; do
+    if [ -z "$1" -o -z "${1##* *}" ]; then
+      s="$s \"$1\""
+    else
+      s="$s $1"
+    fi
+
+    shift
+  done
+
+  info "$s"
+}
+
+# Trace and run a command.
+#
+run () # <args>...
+{
+  trace "$@"
+  "$@"
+}
+
+# The chosen fixed id for the 'brep' user. Note: must match the id of the
+# 'brep' user on the host.
+#
+# Note that Linux assigns the [0 99] range for the statically allocated system
+# users and [100 499] -- for dynamic allocations by administrators and post-
+# install scripts. Debian, in turn, assigns the [100 999] range for the
+# dynamically allocated system users and [60000 64999] -- for statically
+# allocated on demand "obscure package users".
+#
+brep_id=63700 # Update the README file on change.
+
+# Parse the command line options and, while at it, compose the options array
+# for potential re-execution as the 'brep' user.
+#
+mount=
+setup=
+ops=()
+
+while [ "$#" -gt 0 ]; do
+  case "$1" in
+    --mount)
+      mount=true
+      ops+=("$1")
+      shift
+      ;;
+    --brep-user)
+      shift
+      brep_id="$1"
+      shift
+      ;;
+    --setup)
+      setup=true
+      shift
+      ;;
+    *)
+      break # The end of options is encountered.
+      ;;
+  esac
+done
+
+if [ "$#" -ne 0 ]; then
+  error "$usage"
+fi
+
+scr_exe="$(realpath "${BASH_SOURCE[0]}")"
+scr_dir="$(dirname "$scr_exe")"
+
+# Unless we are not in the setup mode, non-interactively add the 'brep'
+# user/group and re-execute the script in the setup mode as this user.
+#
+if [ ! "$setup" ]; then
+  run sudo addgroup --gid "$brep_id" brep
+
+  run sudo adduser --uid "$brep_id" --gid "$brep_id" --disabled-password \
+      --gecos "" brep
+
+  run sudo tee -a /etc/sudoers.d/brep >/dev/null <<EOF
+brep ALL=(ALL) NOPASSWD:ALL
+EOF
+
+  run sudo chmod 0440 /etc/sudoers.d/brep
+
+  # Use --session-command rather than --command|-c to make sure that when the
+  # su program receives SIGINT (Ctrl-C) it kills not just its child process
+  # but also all its descendants.
+  #
+  # Note: here we rely on ops to not contain spaces or be empty.
+  #
+  run exec sudo su -l brep --session-command "'$scr_exe' --setup ${ops[@]}"
+fi
+
+# Here we assume that we are executed as brep user.
+#
+run cd "$HOME"
+
+# Mount the brep state directory, if requested. Note that otherwise, the
+# directory will be created later, in the local filesystem by the brep-startup
+# script.
+#
+if [ "$mount" ]; then
+  run sudo mkdir -p /var/brep
+
+  run sudo tee -a /etc/fstab >/dev/null <<EOF
+state /var/brep 9p trans=virtio,version=9p2000.L,posixacl,cache=none,_netdev 0 0
+EOF
+
+  run sudo mount -a
+fi
+
+# Install the prerequisite binary packages.
+#
+run sudo apt-get --yes update
+run sudo apt-get --yes install --no-install-recommends g++
+run sudo apt-get --yes install --no-install-recommends postgresql postgresql-contrib libpq-dev
+run sudo apt-get --yes install --no-install-recommends apache2 libapr1-dev libapreq2-dev apache2-dev
+run sudo apt-get --yes install --no-install-recommends acl rsync
+run sudo apt-get clean
+
+# Install build2 toolchain.
+#
+run mkdir build2-build
+run cd build2-build
+
+# Look for the toolchain installation script in this script directory.
+#
+run cp "$(echo "$scr_dir"/build2-install-*.sh)" .
+run sh ./build2-install-*.sh --no-check --yes --trust "$toolchain_repo_cert_fp"
+#run sh ./build2-install-*.sh --no-check --yes --local
+
+run cd .. # Back to brep home.
+
+# Grant Apache2 read access to the module and configuration.
+#
+run setfacl -m  g:www-data:rx "$HOME"
+run setfacl -dm g:www-data:rx "$HOME"
+
+# Install brep.
+#
+run mkdir brep
+run cd brep
+
+run bpkg create                               \
+ cc                                           \
+ config.cc.coptions="-O3"                     \
+ config.cc.poptions="-I$(apxs -q includedir)" \
+ config.bin.lib=shared                        \
+ config.bin.rpath="$HOME/install/lib"         \
+ config.install.root="$HOME/install"
+
+run bpkg add "$brep_repo_url"
+run bpkg fetch --trust "$brep_repo_cert_fp"
+run bpkg build --yes brep ?sys:libapr1 ?sys:libapreq2 ?sys:libpq
+run bpkg install brep
+
+run cd .. # Back to brep home.
+
+# Create PostgreSQL user and databases.
+#
+# Note that while we could probably omit the build-related setup, let's keep
+# it to stay close to the instructions in the INSTALL file and to simplify the
+# potential future configuration of the brep instance as a build2 build bot
+# controller.
+#
+run sudo sudo -u postgres psql <<EOF
+CREATE DATABASE brep_package
+TEMPLATE template0
+ENCODING 'UTF8'
+LC_COLLATE 'en_US.UTF8'
+LC_CTYPE 'en_US.UTF8';
+
+CREATE DATABASE brep_build
+TEMPLATE template0
+ENCODING 'UTF8'
+LC_COLLATE 'en_US.UTF8'
+LC_CTYPE 'en_US.UTF8';
+
+CREATE USER brep;
+
+GRANT ALL PRIVILEGES ON DATABASE brep_package, brep_build TO brep;
+
+CREATE USER "www-data" INHERIT IN ROLE brep;
+
+CREATE USER "brep-build" INHERIT IN ROLE brep PASSWORD '-';
+EOF
+
+# Create the "staging" package database for the submit-pub package submission
+# handler.
+#
+run sudo sudo -u postgres psql <<EOF
+CREATE DATABASE brep_submit_package
+TEMPLATE template0
+ENCODING 'UTF8'
+LC_COLLATE 'en_US.UTF8'
+LC_CTYPE 'en_US.UTF8';
+
+GRANT ALL PRIVILEGES ON DATABASE brep_submit_package TO brep;
+EOF
+
+# Make sure the 'brep' and Apache2 user's logins work properly.
+#
+q="SELECT current_database();"
+run psql -d brep_package        -c "$q" >/dev/null
+run psql -d brep_build          -c "$q" >/dev/null
+run psql -d brep_submit_package -c "$q" >/dev/null
+
+run sudo sudo -u www-data psql -d brep_package -c "$q" >/dev/null
+run sudo sudo -u www-data psql -d brep_build   -c "$q" >/dev/null
+
+# Setup the connection between the databases.
+#
+run sudo sudo -u postgres psql -d brep_build <<EOF
+CREATE EXTENSION postgres_fdw;
+
+CREATE SERVER package_server
+FOREIGN DATA WRAPPER postgres_fdw
+OPTIONS (dbname 'brep_package', updatable 'false');
+
+GRANT USAGE ON FOREIGN SERVER package_server to brep;
+
+CREATE USER MAPPING FOR PUBLIC
+SERVER package_server
+OPTIONS (user 'brep-build', password '-');
+EOF
+
+# Allow brep-build user to access the brep_package database.
+#
+f="$(run sudo sudo -u postgres psql -t -A -c "show hba_file;")"
+s="# TYPE  DATABASE      USER        ADDRESS  METHOD\nlocal   brep_package  brep-build           md5\n\n"
+
+run sudo sed --in-place=.bak "1s/^/$s/" "$f"
+run sudo systemctl restart postgresql
+
+# Enable creating database tables with columns of the case-insensitive
+# character string type.
+#
+q="CREATE EXTENSION citext;"
+run sudo sudo -u postgres psql -d brep_package        <<<"$q"
+run sudo sudo -u postgres psql -d brep_build          <<<"$q"
+run sudo sudo -u postgres psql -d brep_submit_package <<<"$q"
+
+# Copy the brep module configuration.
+#
+# Note: must be done before bin/brep-startup execution, which adjusts the
+# configuration.
+#
+run mkdir config
+run cp "$scr_dir/brep-module.conf" config/
+
+# Initialize the brep private instance, in particular creating the database
+# schemas and running the brep loader.
+#
+run mkdir bin/
+run cp "$scr_dir/brep-startup" bin/
+run bin/brep-startup
+
+# Smoke test the database schemas.
+#
+run psql -d brep_package        -c 'SELECT canonical_name, summary FROM repository' >/dev/null
+run psql -d brep_build          -c 'SELECT package_name FROM build'                 >/dev/null
+run psql -d brep_build          -c 'SELECT DISTINCT name FROM build_package'        >/dev/null
+run psql -d brep_submit_package -c 'SELECT canonical_name, summary FROM repository' >/dev/null
+
+# Setup executing the brep-startup script on boot.
+#
+run sudo cp "$scr_dir/brep-startup.service" /etc/systemd/system/
+
+run sudo systemctl start brep-startup.service  # Make sure there are no issues.
+run sudo systemctl enable brep-startup.service
+
+# Prepare directories for the package submission service.
+#
+run mkdir submit-data
+run mkdir submit-temp
+run setfacl -m g:www-data:rwx submit-data
+run setfacl -m g:www-data:rwx submit-temp
+
+# Make the Apache2 user owned directories fully accessible by the 'brep' user
+# (which the submit-pub submission handler will run as).
+#
+run setfacl -dm g:brep:rwx submit-data
+run setfacl -dm g:brep:rwx submit-temp
+
+# Add the Apache2 user to sudoers, so the submission handler can re-execute
+# itself as the 'brep' user.
+#
+run sudo tee -a /etc/sudoers.d/www-data >/dev/null <<EOF
+www-data ALL=(ALL) NOPASSWD:ALL
+EOF
+
+run sudo chmod 0440 /etc/sudoers.d/www-data
+
+# Setup the Apache2 module.
+#
+run sudo mkdir -p /var/www/brep/log/
+
+run sudo cp "$scr_dir/brep-apache2.conf" /etc/apache2/sites-available/000-brep.conf
+run sudo cp "$scr_dir/brep-logrotate"    /etc/logrotate.d/brep
+
+run sudo a2dissite --purge -q 000-default
+run sudo a2ensite          -q 000-brep
+
+run sudo systemctl restart apache2
+run sudo systemctl status  apache2 >/dev/null
+
+# Make sure the Apache2 service depends on PostgreSQL and
+# brep-startup.service, so that they are started in proper order.
+#
+run sudo mkdir -p /etc/systemd/system/apache2.service.d/
+run sudo tee      /etc/systemd/system/apache2.service.d/postgresql.conf >/dev/null <<EOF
+[Unit]
+Requires=postgresql.service
+After=postgresql.service
+EOF
+
+run sudo tee      /etc/systemd/system/apache2.service.d/brep-startup.conf >/dev/null <<EOF
+[Unit]
+Requires=brep-startup.service
+After=brep-startup.service
+EOF
+
+run sudo mkdir -p /etc/systemd/system/postgresql.service.d/
+run sudo tee      /etc/systemd/system/postgresql.service.d/apache2.conf >/dev/null <<EOF
+[Unit]
+Wants=apache2.service
+EOF
+
+run sudo systemctl daemon-reload
+
+# Verify that Apache2 is stopped after PostgreSQL is stopped.
+#
+run sudo systemctl stop postgresql
+
+ec="0"
+run sudo systemctl status apache2 >/dev/null || ec="$?"
+
+if [ "$ec" -ne 3  ]; then
+  error "exit code 3 (unit is not active) is expected instead of $ec"
+fi
+
+# Verify that Apache2 is started after PostgreSQL is started.
+#
+run sudo systemctl start postgresql
+
+run sleep 3
+run sudo systemctl status apache2 >/dev/null
+
+# Setup periodic loader execution.
+#
+run sudo cp "$scr_dir/brep-load.service" /etc/systemd/system/
+run sudo cp "$scr_dir/brep-load.timer"   /etc/systemd/system/
+
+run sudo systemctl start brep-load.service # Make sure there are no issues.
+
+run sudo systemctl start  brep-load.timer
+run sudo systemctl status brep-load.timer >/dev/null
+run sudo systemctl enable brep-load.timer
+run sudo systemctl status brep-load.timer >/dev/null
diff --git a/etc/private/install/brep-load.service b/etc/private/install/brep-load.service
new file mode 100644
index 0000000..272a124
--- /dev/null
+++ b/etc/private/install/brep-load.service
@@ -0,0 +1,11 @@
+[Unit]
+Description=brep repository loader service
+
+[Service]
+Type=oneshot
+User=brep
+Group=brep
+ExecStart=/home/brep/install/bin/brep-load /home/brep/config/loadtab
+
+[Install]
+WantedBy=default.target
diff --git a/etc/private/install/brep-load.timer b/etc/private/install/brep-load.timer
new file mode 100644
index 0000000..1bf78c4
--- /dev/null
+++ b/etc/private/install/brep-load.timer
@@ -0,0 +1,33 @@
+[Unit]
+Description=brep repository loader timer
+RefuseManualStart=no
+RefuseManualStop=no
+
+# Note that due to brep-startup service's oneshot type, this unit won't be
+# started until the brep-startup process exits successfully.
+#
+# Also note that if brep-startup fails and is restarted manually, similar to
+# services, the timer is not started automatically. Instead, it has to be
+# started manually with `systemctl start brep-load.timer`.
+#
+Requires=brep-startup.service
+After=brep-startup.service
+
+[Timer]
+Unit=brep-load.service
+
+# Don't keep track of the timer across reboots.
+#
+Persistent=false
+
+# Start the timer for the first time.
+#
+OnBootSec=1
+
+# Then wait 4-5 seconds until the next run.
+#
+OnUnitInactiveSec=4
+AccuracySec=1
+
+[Install]
+WantedBy=timers.target
diff --git a/etc/private/install/brep-logrotate b/etc/private/install/brep-logrotate
new file mode 100644
index 0000000..67c7c90
--- /dev/null
+++ b/etc/private/install/brep-logrotate
@@ -0,0 +1,20 @@
+/var/www/brep/log/*.log {
+  weekly
+  missingok
+  rotate 4
+  compress
+  delaycompress
+  notifempty
+  create 640 root adm
+  sharedscripts
+  postrotate
+    if /etc/init.d/apache2 status > /dev/null ; then \
+      /etc/init.d/apache2 reload > /dev/null; \
+    fi;
+  endscript
+  prerotate
+    if [ -d /etc/logrotate.d/httpd-prerotate ]; then \
+      run-parts /etc/logrotate.d/httpd-prerotate; \
+    fi; \
+  endscript
+}
diff --git a/etc/private/install/brep-module.conf b/etc/private/install/brep-module.conf
new file mode 100644
index 0000000..0bff58d
--- /dev/null
+++ b/etc/private/install/brep-module.conf
@@ -0,0 +1,387 @@
+# Configuration file for the brep module (note: this is not an apache2 .conf
+# file but it can be converted to one by prefixing all the options with
+# brep-). See brep(1) for detailed description of each configuration option.
+# Commented out options indicate their default values.
+#
+# Besides being parsed by the brep module, this file may also be parsed by
+# brep utilities that are normally only interested in the subset of the
+# options. To simplify skipping of unrecognized, this file must always have an
+# option name and its value on the same line.
+#
+
+# Package search page title. It is placed inside XHTML5 <title> element.
+#
+# search-title Packages
+
+
+# Web page logo. It is displayed in the page header aligned to the left edge.
+# The value is treated as an XHTML5 fragment.
+#
+# logo ""
+
+
+# Web page menu. Each entry is displayed in the page header in the order
+# specified and aligned to the right edge. A link target that starts with '/'
+# or contains ':' is used as is. Otherwise, it is prefixed with the repository
+# web interface root.
+#
+menu Packages=
+# menu Builds=?builds
+# menu Configs=?build-configs
+menu Submit=?submit
+# menu CI=?ci
+menu About=?about
+
+
+# Number of packages per page.
+#
+# search-page-entries 20
+
+
+# Number of pages in navigation (pager).
+#
+# search-pages 5
+
+
+# Number of package description characters to display in brief pages.
+#
+# package-description 500
+
+
+# Number of package changes characters to display in brief pages.
+#
+# package-changes 5000
+
+
+# The package database connection configuration. By default, brep will try to
+# connect to the local instance of PostgreSQL with the operating system-
+# default mechanism (Unix-domain socket, etc) and use operating system
+# (login) user name and the database called 'brep_package'. If the role name
+# is not empty then the login user will be switched (with SET ROLE) to this
+# user prior to executing any statements. If not specified, then 'brep' is
+# used. See brep(1) for details.
+#
+# package-db-user
+# package-db-role     brep
+# package-db-password
+# package-db-name     brep_package
+# package-db-host
+# package-db-port
+
+
+# The maximum number of concurrent package database connections per web server
+# process. If 0, then no limitation is applied.
+#
+# package-db-max-connections 5
+
+
+# The maximum number of times to retry package database transactions in the
+# face of recoverable failures (deadlock, loss of connection, etc).
+#
+# package-db-retry 10
+
+
+# Build configuration file. If not specified (default), then the package
+# building functionality will be disabled. If specified, then the build
+# database must be configured (see next). Note: must be an absolute path.
+#
+# build-config
+
+
+# Number of build configurations per page.
+#
+# build-config-page-entries 20
+
+
+# Number of pages in navigation (pager).
+#
+# build-config-pages 5
+
+
+# Directory containing build bot agent public keys. If specified, then brep
+# will perform agent authentication and will reject build results from
+# unauthenticated ones. If not specified, then build results are accepted from
+# all agents (which will be a security risk if the brep instance is publicly
+# accessible).
+#
+# The directory is expected to contain one PEM-encoded public key per file with
+# the .pem extension. All other files and subdirectories are ignored. The brep
+# instance needs to be restarted after adding new key files for the changes to
+# take effect.
+#
+# build-bot-agent-keys
+
+
+# Number of builds per page.
+#
+# build-page-entries 20
+
+
+# Number of pages in navigation (pager).
+#
+# build-pages 5
+
+
+# Time to wait before considering a package for a forced rebuild. Must be
+# specified in seconds. Default is 10 minutes.
+#
+# build-forced-rebuild-timeout 600
+
+
+# Time to wait before considering a package for a normal rebuild. Must be
+# specified in seconds. Default is 24 hours.
+#
+# build-normal-rebuild-timeout 86400
+
+
+# Alternative package rebuild timeout to use instead of the normal rebuild
+# timeout (see the build-normal-rebuild-timeout option for details) during
+# the specified time interval. Must be specified in seconds. Default is the
+# time interval length.
+#
+# The alternative rebuild timeout can be used to "pull" the rebuild window to
+# the specified time of day, for example, to optimize load and/or power
+# consumption of the build infrastructure (off-work hours, solar, off-peak
+# electricity tariffs, etc). A shorter than the time interval rebuild timeout
+# can also be used to force continuous rebuilds, for example, to shake out
+# flaky tests. Note also that if the alternative rebuild timeout is greater
+# than the normal rebuild timeout, then this will result in slower rebuilds
+# during the alternative time interval. In this case, if the build
+# infrastructure is monitored for delayed package builds, then the alternative
+# rebuild timeout should only be made slightly greater than the normal timeout
+# (see brep-monitor(1) for details).
+#
+# The time interval boundaries must be specified as times of day (in the local
+# timezone) in the <hours>:<minutes> form. If the stop time is less than the
+# start time then the interval extends through midnight. The start and stop
+# times must both be either specified or absent. If unspecified, then no
+# alternative rebuild timeout will be used.
+#
+# build-alt-rebuild-timeout
+# build-alt-rebuild-start
+# build-alt-rebuild-stop
+
+
+# The maximum size of the build task request manifest accepted. Note that the
+# HTTP POST request body is cached to retry database transactions in the face
+# of recoverable failures (deadlock, loss of connection, etc). Default is
+# 100K.
+#
+# build-task-request-max-size 102400
+
+
+# Time to wait before considering the expected task result lost. Must be
+# specified in seconds. Default is 3 hours.
+#
+# build-result-timeout 10800
+
+
+# The maximum size of the build result manifest accepted. Note that the HTTP
+# POST request body is cached to retry database transactions in the face of
+# recoverable failures (deadlock, loss of connection, etc). Default is 10M.
+#
+# build-result-request-max-size 10485760
+
+
+# The build database connection configuration. By default, brep will try to
+# connect to the local instance of PostgreSQL with the operating system-default
+# mechanism (Unix-domain socket, etc) and use operating system (login) user
+# name and the database called 'brep_build'. If the role name is not empty
+# then the login user will be switched (with SET ROLE) to this user prior
+# to executing any statements. If not specified, then 'brep' is used. See
+# brep(1) for details.
+#
+# build-db-user
+# build-db-role     brep
+# build-db-password
+# build-db-name     brep_build
+# build-db-host
+# build-db-port
+
+
+# The maximum number of concurrent build database connections per web server
+# process. If 0, then no limitation is applied.
+#
+# build-db-max-connections 5
+
+
+# The maximum number of times to retry build database transactions in the
+# face of recoverable failures (deadlock, loss of connection, etc).
+#
+# build-db-retry 10
+
+
+# The openssl program to be used for crypto operations. You can also specify
+# additional options that should be passed to the openssl program with
+# openssl-option. If the openssl program is not explicitly specified, then brep
+# will use openssl by default.
+#
+# openssl openssl
+
+
+# Additional option to be passed to the openssl program (see openssl for
+# details). Repeat this option to specify multiple openssl options.
+#
+# openssl-option
+
+
+# Environment variable to be set (<name>=<value>) or unset (just <name>) for
+# the openssl program (see openssl for details). Repeat this option to specify
+# multiple openssl variables. Note that unspecified variables are inherited
+# from the web server process.
+#
+# You need to at least set the RANDFILE environment variable to change the
+# default location of the openssl program seed file and maybe also the
+# OPENSSL_CONF variable if you would like to use a custom openssl configuration
+# file.
+#
+# openssl-envvar RANDFILE=/home/brep/www-data-openssl.rnd
+# openssl-envvar OPENSSL_CONF=/home/brep/www-data-openssl.cnf
+#
+# To create www-data-openssl.rnd with suitable permissions, run (as user brep):
+#
+# $ touch www-data-openssl.rnd
+# $ setfacl -b -m g:www-data:rw www-data-openssl.rnd
+#
+
+
+# The directory to save final submission data to. If unspecified, the package
+# submission functionality will be disabled. If specified, then submit-temp
+# must be specified as well.
+#
+# Note that the directory path must be absolute and the directory itself must
+# exist and have read, write, and execute permissions granted to the user that
+# runs the web server.
+#
+submit-data /home/brep/submit-data
+
+
+# The directory to save temporary submission data to. Must be specified if the
+# package submission functionality is enabled.
+#
+# Note that this directory must be on the same filesystem and satisfy the same
+# requirements as submit-data. It is also the user's responsibility to clean
+# it up after an unclean web server shutdown.
+#
+submit-temp /home/brep/submit-temp
+
+
+# The maximum size of the submission data accepted. Note that currently the
+# entire submission request is read into memory. Default is 10M.
+#
+# 100M.
+#
+submit-max-size 104857600
+
+
+# The package submission form fragment. If specified, then its contents are
+# treated as an XHTML5 fragment that is inserted into the <body> element of
+# the submission page. If unspecified, then no submission page will be
+# displayed. Note that the file path must be absolute.
+#
+submit-form /home/brep/install/share/brep/www/submit.xhtml
+
+
+# The package submission email. If specified, the submission request and
+# result manifests will be sent to this address.
+#
+# submit-email
+
+
+# The handler program to be executed on package submission. The handler is
+# executed as part of the submission request and is passed additional
+# arguments that can be specified with submit-handler-argument followed by
+# the absolute path to the submission directory. Note that the program path
+# must be absolute.
+#
+submit-handler /home/brep/install/bin/brep-submit-pub
+
+
+# Additional arguments to be passed to the submission handler program (see
+# submit-handler for details). Repeat this option to specify multiple
+# arguments.
+#
+submit-handler-argument --user
+submit-handler-argument brep
+submit-handler-argument --result-url
+submit-handler-argument http://unknown
+submit-handler-argument /home/brep/install/bin/brep-load
+submit-handler-argument --db-name=brep_submit_package
+submit-handler-argument /var/brep/bpkg/pkg
+
+
+# The handler program timeout in seconds. If specified and the handler does
+# not exit in the alloted time, then it is killed and its termination is
+# treated as abnormal.
+#
+submit-handler-timeout 120
+
+
+# The directory to save CI request data to. If unspecified, the package CI
+# functionality will be disabled.
+#
+# Note that the directory path must be absolute and the directory itself must
+# exist and have read, write, and execute permissions granted to the user that
+# runs the web server.
+#
+# ci-data
+
+
+# The package CI form fragment. If specified, then its contents are treated as
+# an XHTML5 fragment that is inserted into the <body> element of the CI page.
+# If unspecified, then no CI page will be displayed. Note that the file path
+# must be absolute.
+#
+# ci-form
+
+
+# The package CI email. If specified, the CI request and result manifests will
+# be sent to this address.
+#
+# ci-email
+
+
+# The handler program to be executed on CI request. The handler is executed as
+# part of the HTTP request and is passed additional arguments that can be
+# specified with ci-handler-argument followed by the absolute path to the CI
+# request directory. Note that the program path must be absolute.
+#
+# ci-handler
+
+
+# Additional arguments to be passed to the CI handler program (see ci-handler
+# for details). Repeat this option to specify multiple arguments.
+#
+# ci-handler-argument
+
+
+# The CI handler program timeout in seconds. If specified and the handler does
+# not exit in the allotted time, then it is killed and its termination is
+# treated as abnormal.
+#
+# ci-handler-timeout
+
+
+# The default view to display for the global repository root. The value is one
+# of the supported services (packages, builds, submit, ci, etc). Default is
+# packages.
+#
+# root-global-view packages
+
+
+# The default view to display for the tenant repository root. The value is one
+# of the supported services (packages, builds, submit, ci, etc). Default is
+# packages.
+#
+# root-tenant-view packages
+
+
+# Name to call the tenant values on web pages. If not specified, then 'tenant'
+# is used.
+#
+# tenant-name tenant
+
+
+# Trace verbosity. Disabled by default.
+#
+# verbosity 0
diff --git a/etc/private/install/brep-startup b/etc/private/install/brep-startup
new file mode 100755
index 0000000..80cb255
--- /dev/null
+++ b/etc/private/install/brep-startup
@@ -0,0 +1,67 @@
+#! /usr/bin/env bash
+
+# file      : etc/private/install/brep-startup
+# license   : MIT; see accompanying LICENSE file
+
+# (Re-)initialize the brep private instance, normally on the machine startup.
+#
+# Specifically:
+#
+# - Create the pkg repository and symlink to it, unless already exists.
+#
+# - Migrate the brep databases as a sanity check.
+#
+# - Adjust the brep module configuration file using the current host name/IP.
+#
+# - Generate the loadtab using the current host name/IP and run the loader.
+#
+trap "{ exit 1; }" ERR
+
+# Create the pkg repository, if required.
+#
+d=/var/brep/bpkg
+
+if [ ! -L "$d/pkg" ]; then
+  rd="$(date "+pkg-%Y%m%d-%H%M%S-%N")"
+
+  mkdir -p "$d/$rd/1"
+  ln -s "$rd" "$d/pkg"
+fi
+
+r="$d/pkg/1"
+
+if [ ! -f "$r/repositories.manifest" ]; then
+  echo ": 1" >"$r/repositories.manifest"
+fi
+
+if [ ! -f "$r/packages.manifest" ]; then
+  bpkg rep-create -q "$r"
+fi
+
+# Migrate the databases.
+#
+"$HOME/install/bin/brep-migrate" package
+"$HOME/install/bin/brep-migrate" build
+"$HOME/install/bin/brep-migrate" -n brep_submit_package package
+
+# Deduce the machine host name.
+#
+h="$(hostname -f)"
+if [ "$h" == "localhost" ]; then
+  h="$(hostname -I | sed 's/ *$//')" # Strip the potential trailing space(s).
+fi
+
+# Adjust the submission result URL host name in the brep module configuration
+# file.
+#
+sed --in-place -re \
+"\$!N;s%^\s*(submit-handler-argument\s+--result-url\s*\\n)\
+\s*(submit-handler-argument\s+https?://)[^/]+(.*)\$%\1\2$h\3%;P;D" \
+"$HOME/config/brep-module.conf"
+
+# (Re-)generate the loadtab file and reload the repository.
+#
+f="$HOME/config/loadtab"
+
+echo "http://$h/1 private cache:$r" >"$f"
+"$HOME/install/bin/brep-load" "$f"
diff --git a/etc/private/install/brep-startup.service b/etc/private/install/brep-startup.service
new file mode 100644
index 0000000..a3dc546
--- /dev/null
+++ b/etc/private/install/brep-startup.service
@@ -0,0 +1,17 @@
+[Unit]
+Description=brep instance initialization service
+
+Wants=network-online.target
+After=network-online.target
+
+Requires=postgresql.service
+After=postgresql.service
+
+[Service]
+Type=oneshot
+User=brep
+Group=brep
+ExecStart=/home/brep/bin/brep-startup
+
+[Install]
+WantedBy=default.target
diff --git a/etc/private/install/vm-gen-service b/etc/private/install/vm-gen-service
new file mode 100755
index 0000000..c4938c2
--- /dev/null
+++ b/etc/private/install/vm-gen-service
@@ -0,0 +1,204 @@
+#! /usr/bin/env bash
+
+# Generate systemd .service file for QEMU/KVM virtual machines.
+#
+# Normally the machines are run from a dedicated user account with its home
+# directory containing all the relevant files (management scripts, images,
+# configurations, and sockets). However, this can be overriden with the
+# following options
+#
+# --home <dir>
+#   The virtual machines "home" directory. If unspecified, the user's home
+#   directory is assumed.
+#
+# --bin <dir>
+#   The virtual machines management scripts directory. If unspecified,
+#   <home>/bin is assumed. If specified as relative, then assumed relative
+#   to <home>.
+#
+# --etc <dir>
+#   The virtual machines configuration files directory. If unspecified,
+#   <home>/etc is assumed. If specified as relative, then assumed relative
+#   to <home>.
+#
+# --var <dir>
+#   The virtual machines image files directory. If unspecified, <home>/var is
+#   assumed. If specified as relative, then assumed relative to <home>.
+#
+# --run <dir>
+#   The virtual machines sockets directory. If unspecified, <home>/run is
+#   assumed. If specified as relative, then assumed relative to <home>.
+#
+# If <user> is unspecified, the current user is assumed. If <group> is
+# unspecified, the user's primary group is assumed.
+#
+usage="usage: $0 [<options>] [<user>] [<group>]"
+
+owd="$(pwd)"
+trap "{ cd '$owd'; exit 1; }" ERR
+set -o errtrace # Trap in functions.
+
+function info () { echo "$*" 1>&2; }
+function error () { info "$*"; exit 1; }
+
+home=
+bin=
+etc=
+var=
+run=
+
+while [ "$#" -gt 0 ]; do
+  case "$1" in
+    --home)
+      shift
+      home="$1"
+      shift
+      ;;
+    --bin)
+      shift
+      bin="$1"
+      shift
+      ;;
+    --etc)
+      shift
+      etc="$1"
+      shift
+      ;;
+    --var)
+      shift
+      var="$1"
+      shift
+      ;;
+    --run)
+      shift
+      run="$1"
+      shift
+      ;;
+    *)
+      break
+      ;;
+  esac
+done
+
+user="$1"
+
+if [ -z "$user" ]; then
+  user="$(id -un)"
+fi
+
+group="$2"
+
+if [ -z "$group" ]; then
+  group="$(id -un "$user")"
+fi
+
+if [ -z "$home" ]; then
+  home="$(eval echo ~$user)"
+fi
+
+function complete_dir () # <default> <home> <dir>
+{
+  local r
+  if [ -z "$3" ]; then
+    r="$2/$1"
+  elif [ "${3:0:1}" != "/" ]; then
+    r="$2/$3"
+  else
+    r="$3"
+  fi
+  echo "$(realpath --no-symlinks --canonicalize-missing "$r")"
+}
+
+bin="$(complete_dir bin "$home" "$bin")"
+etc="$(complete_dir etc "$home" "$etc")"
+var="$(complete_dir var "$home" "$var")"
+run="$(complete_dir run "$home" "$run")"
+
+name="vm-$user"
+file="$name@.service"
+
+# Thinks that must be \-escaped:
+#
+# - $ (including in comments)
+# - \ (e.g., in line continuations)
+#
+cat <<EOF >"$file"
+# $file -- QEMU/KVM machine service template for systemd
+#
+# user:  $user
+# group: $group
+# bin:   $bin
+# etc:   $etc
+# var:   $var
+# run:   $run
+#
+# To install:
+#
+# sudo cp $file /etc/systemd/system/
+# sudo chmod 644 /etc/systemd/system/$file
+#
+# cp ... $var/<machine>.img
+# nano   $etc/<machine>.conf # Specify RAM, CPU, TAP, MAC, etc.
+#
+# sudo systemctl start  $name@<machine>
+# sudo systemctl status $name@<machine>
+# login-machine $run/<machine>-con.sock
+# sudo systemctl stop   $name@<machine>
+#
+# sudo systemctl enable $name@<machine>
+
+[Unit]
+Description=QEMU/KVM virtual machine %I
+
+Wants=network-online.target
+#After=network-online.target
+After=multi-user.target
+
+[Service]
+User=$user
+Group=$user
+UMask=0007
+WorkingDirectory=~
+
+Environment=CPU=1
+Environment=RAM=2G
+
+# These MUST be specific in EnvironmentFile!
+#
+#Environment=TAP=
+#Environment=MAC=
+
+# Note that using variable expansion in EnvironmentFile does not work (at
+# least not with systemd 229).
+#
+EnvironmentFile=$etc/%i.conf
+
+# Note that the first word of ExecStart cannot contain variable expansions.
+#
+ExecStart=$bin/vm-start \\
+  --cpu \${CPU} \\
+  --ram \${RAM} \\
+  --tap \${TAP} \\
+  --mac \${MAC} \\
+  --monitor $run/%i-mon.sock \\
+  --console $run/%i-con.sock \\
+  $var/%i.img
+
+ExecStop=$bin/vm-stop $run/%i-mon.sock
+
+# Make systemd wait for ExecStop completion.
+#
+KillMode=none
+TimeoutStopSec=60
+
+[Install]
+WantedBy=multi-user.target
+EOF
+
+info "generated $file for"
+info "  user:  $user"
+info "  group: $group"
+info "  bin:   $bin"
+info "  etc:   $etc"
+info "  var:   $var"
+info "  run:   $run"
diff --git a/etc/private/vm-login b/etc/private/vm-login
new file mode 100755
index 0000000..3b501ca
--- /dev/null
+++ b/etc/private/vm-login
@@ -0,0 +1,30 @@
+#! /usr/bin/env bash
+
+# Get virtual machine console.
+#
+usage="usage: $0 <console-socket>"
+
+owd="$(pwd)"
+trap "{ cd '$owd'; exit 1; }" ERR
+set -o errtrace # Trap in functions.
+
+function info () { echo "$*" 1>&2; }
+function error () { info "$*"; exit 1; }
+
+con="$1"
+
+if [ -z "$con" ]; then
+  error "missing console socket"
+fi
+
+pty="$(dirname "$con")/$(basename -s .sock "$con").pty"
+
+socat "UNIX-CONNECT:$con" "PTY,link=$pty" &
+pid="$!"
+
+screen "$pty"
+
+# Note: socat may have already terminated (e.g., VM was shut down).
+#
+kill "$pid" 2>/dev/null || true
+wait
diff --git a/etc/private/vm-start b/etc/private/vm-start
new file mode 100755
index 0000000..41c4247
--- /dev/null
+++ b/etc/private/vm-start
@@ -0,0 +1,98 @@
+#! /usr/bin/env bash
+
+# file      : etc/private/vm-start
+# license   : MIT; see accompanying LICENSE file
+
+# Start the brep virtual machine (VM) for installing or running the previously
+# installed brep private instance. Must be executed on the host as brep user.
+#
+# Share with the VM the brep state directory as the 9p filesystem with the
+# passthrough security model enabled. This directory is expected to be owned
+# by the brep user and either contain the pkg repository maintained by the
+# brep instance or be empty, in which case the empty repository will be
+# automatically initialized.
+#
+# Note that you can signal to the VM to regenerate the repository on startup
+# (e.g., after package removal) by removing the packages.manifest file from
+# the repository.
+#
+# Options:
+#
+# --state <dir>
+#
+#   State directory to share with the VM. If unspecified, $HOME/state is
+#   assumed.
+#
+# --install <dir>
+#
+#   Also share with the VM the install directory (contains the brep private
+#   instance installation script and auxiliary files).
+#
+# Note that this script wraps the generic vm-start-base script and passes
+# through any arguments that follows these options to that script.
+#
+usage="usage: $0 [<options>] [<base-options>] <machine-img> [<extra-qemu-options>]"
+
+trap "{ exit 1; }" ERR
+set -o errtrace # Trap ERR in functions.
+
+function info () { echo "$*" 1>&2; }
+function error () { info "$*"; exit 1; }
+
+install=
+state="$HOME/state"
+
+while [ "$#" -gt 0 ]; do
+  case "$1" in
+    --install)
+      shift
+      install="${1%/}"
+      shift
+      ;;
+    --state)
+      shift
+      state="${1%/}"
+      shift
+      ;;
+    *)
+      break # The end of options is encountered.
+      ;;
+  esac
+done
+
+if [ "$#" -eq 0 ]; then
+  error "missing machine image"
+fi
+
+# Verify the state directory existence.
+#
+if [ ! -d "$state" ]; then
+  error "state directory '$state' does not exist or is not a directory"
+fi
+
+# Compute the start and QEMU options.
+#
+start_ops=()
+qemu_ops=(\
+  -fsdev "local,id=state,path=$state,security_model=passthrough" \
+  -device "virtio-9p-pci,fsdev=state,mount_tag=state")
+
+if [ -n "$install" ]; then
+
+  # Verify the toolchain install script existence in the install directory.
+  #
+  if [ ! -f "$(echo "$install"/build2-install-*.sh)" ]; then
+    error "missing toolchain installation script in '$install' directory"
+  fi
+
+  start_ops+=(--stdio)
+  qemu_ops+=(\
+    -fsdev "local,id=install,path=$install,security_model=passthrough" \
+    -device "virtio-9p-pci,fsdev=install,mount_tag=install")
+fi
+
+# Finally, forward execution to the base script.
+#
+scr_dir="$(dirname "$(realpath "${BASH_SOURCE[0]}")")"
+
+exec "$scr_dir/vm-start-base" "${start_ops[@]}" "$@" "${qemu_ops[@]}"
diff --git a/etc/private/vm-start-base b/etc/private/vm-start-base
new file mode 100755
index 0000000..df59d6a
--- /dev/null
+++ b/etc/private/vm-start-base
@@ -0,0 +1,187 @@
+#! /usr/bin/env bash
+
+# Start a QEMU/KVM virtual machine.
+#
+# --cpu <num>
+#   CPU hardware threads to allocate to the VM, 1 by default.
+#
+# --ram <num>
+#   RAM to allocate to the VM, 2G by default (can be specified with G,
+#   M suffixes).
+#
+# --tap <tap>
+#   Existing tap interface to use instead of creating a new one.
+#
+# --mac <addr>
+#   MAC address to use for the machine.
+#
+# --monitor <path>
+#   Monitor UNIX socket path, /tmp/machine-<tap>-mon.sock if unspecified.
+#
+# --console <path>
+#   Console UNIX socket path, /tmp/machine-<tap>-con.sock if unspecified.
+#
+# --stdio
+#   Connect both console and monitor to stdio (multiplexed).
+#
+# --stdio-monior
+#   Connect only monitor to stdio.
+#
+usage="usage: $0 [<options>] <machine-img> [<extra-qemu-options>]"
+
+owd="$(pwd)"
+trap "{ cd '$owd'; exit 1; }" ERR
+set -o errtrace # Trap in functions.
+
+function info () { echo "$*" 1>&2; }
+function error () { info "$*"; exit 1; }
+
+qemu=(qemu-system-x86_64 -enable-kvm)
+
+# The bridge is only used if we are cretaing the tap.
+#
+br=br0
+
+cpu=1
+ram=2G
+tap=
+mac="de:ad:be:ef:b8:da"
+mon=
+con=
+stdio=
+stdio_monitor=
+
+while [ "$#" -gt 0 ]; do
+  case "$1" in
+    --cpu)
+      shift
+      cpu="$1"
+      shift
+      ;;
+    --ram)
+      shift
+      ram="$1"
+      shift
+      ;;
+    --tap)
+      shift
+      tap="$1"
+      shift
+      ;;
+    --mac)
+      shift
+      mac="$1"
+      shift
+      ;;
+    --monitor)
+      shift
+      mon="$1"
+      shift
+      ;;
+    --console)
+      shift
+      con="$1"
+      shift
+      ;;
+    --stdio)
+      stdio=true
+      stdio_monitor=
+      shift
+      ;;
+    --stdio-monitor)
+      stdio=
+      stdio_monitor=true
+      shift
+      ;;
+    *)
+      break
+      ;;
+  esac
+done
+
+img="$1"
+shift
+
+if [ -z "$img" ]; then
+  error "missing machine image"
+fi
+
+if [ ! -f "$img" ]; then
+  error "machine image '$img' does not exist"
+fi
+
+# Open the reading file descriptor and lock the machine image. Fail if unable
+# to lock.
+#
+# Note that the file descriptor is automatically closed on the script exit and
+# the lock is released.
+#
+exec {lfd}<"$img"
+
+if ! flock -n "$lfd"; then
+  error "machine is already running"
+fi
+
+del_tap=
+if [ -z "$tap" ]; then
+  tap=tap9
+  sudo ip tuntap delete "$tap" mode tap || true
+  sudo ip tuntap add "$tap" mode tap user "$(whoami)"
+  sudo ip link set "$tap" up
+  #sleep 0.5s
+  sudo ip link set "$tap" master "$br"
+  del_tap=true
+fi
+
+if [ -z "$mon" ]; then
+  mon="/tmp/machine-$tap-mon.sock"
+fi
+
+if [ -z "$con" ]; then
+  con="/tmp/machine-$tap-con.sock"
+fi
+
+ops=(\
+  -m "$ram" \
+  -cpu host -smp "$cpu,sockets=1,cores=$cpu,threads=1" \
+  \
+  -netdev "tap,id=net0,ifname=$tap,script=no" \
+  -device "virtio-net-pci,netdev=net0,mac=$mac" \
+  \
+  -drive  "if=none,id=disk0,file=$img,format=raw" \
+  -device "virtio-blk-pci,scsi=off,drive=disk0" \
+  \
+  -nographic \
+)
+
+# Console/monitor options.
+#
+if [ "$stdio" ]; then
+  # Multiplex the monitor and serial console onto stdio. In particular, this
+  # makes sure Ctrl-c is passed to the guest (rather than termination the QEMU
+  # process). To switch between monitor and console, Ctrl-a,c (to terminate
+  # QEMU, type quit in the monitor).
+  #
+  ops+=(-serial mon:stdio)
+else
+  # Monitor.
+  #
+  if [ "$stdio_monitor" ]; then
+    ops+=(-chardev stdio,id=mon)
+  else
+    ops+=(-chardev "socket,id=mon,path=$mon,server,nowait")
+  fi
+
+  ops+=(-mon chardev=mon,mode=readline)
+
+  # Console.
+  #
+  ops+=(-chardev "socket,id=con,path=$con,server,nowait" \
+        -serial chardev:con)
+fi
+
+"${qemu[@]}" "${ops[@]}" -boot c "$@"
+
+if [ "$del_tap" ]; then
+  sudo ip tuntap delete "$tap" mode tap
+fi
diff --git a/etc/private/vm-stop b/etc/private/vm-stop
new file mode 100755
index 0000000..d3b8330
--- /dev/null
+++ b/etc/private/vm-stop
@@ -0,0 +1,24 @@
+#! /usr/bin/env bash
+
+# Stop virtual machine started with vm-start.
+#
+usage="usage: $0 <monitor-socket>"
+
+owd="$(pwd)"
+trap "{ cd '$owd'; exit 1; }" ERR
+set -o errtrace # Trap in functions.
+
+function info () { echo "$*" 1>&2; }
+function error () { info "$*"; exit 1; }
+
+mon="$1"
+
+if [ -z "$mon" ]; then
+  error "missing monitor socket"
+fi
+
+echo system_powerdown | socat - "UNIX-CONNECT:$mon" >/dev/null
+
+# Wait for QEMU to close the socket. This is racy so ignore errors.
+#
+socat "UNIX-CONNECT:$mon" - >/dev/null 2>&1 || true