From 1a869d93875e19efefe7ecfee21ebc776431c370 Mon Sep 17 00:00:00 2001 From: Boris Kolpackov Date: Thu, 3 Sep 2020 11:51:48 +0200 Subject: Add example for bridge/tap network setup using systemd-networkd --- etc/private/systemd-networkd/10-br0.netdev | 8 ++ etc/private/systemd-networkd/10-tap0.netdev | 12 +++ etc/private/systemd-networkd/20-br0-eth0.network | 12 +++ etc/private/systemd-networkd/20-br0-tap0.network | 16 ++++ etc/private/systemd-networkd/30-br0-dhcp.network | 14 ++++ etc/private/systemd-networkd/README | 100 +++++++++++++++++++++++ 6 files changed, 162 insertions(+) create mode 100644 etc/private/systemd-networkd/10-br0.netdev create mode 100644 etc/private/systemd-networkd/10-tap0.netdev create mode 100644 etc/private/systemd-networkd/20-br0-eth0.network create mode 100644 etc/private/systemd-networkd/20-br0-tap0.network create mode 100644 etc/private/systemd-networkd/30-br0-dhcp.network create mode 100644 etc/private/systemd-networkd/README (limited to 'etc/private/systemd-networkd') diff --git a/etc/private/systemd-networkd/10-br0.netdev b/etc/private/systemd-networkd/10-br0.netdev new file mode 100644 index 0000000..6431ba8 --- /dev/null +++ b/etc/private/systemd-networkd/10-br0.netdev @@ -0,0 +1,8 @@ +# Create a bridge network device. +# +# Use ethernet interface's MAC address as bridge MAC. + +[NetDev] +Name=br0 +Kind=bridge +MACAddress=02:11:11:11:11:11 diff --git a/etc/private/systemd-networkd/10-tap0.netdev b/etc/private/systemd-networkd/10-tap0.netdev new file mode 100644 index 0000000..3989bd8 --- /dev/null +++ b/etc/private/systemd-networkd/10-tap0.netdev @@ -0,0 +1,12 @@ +# Create a tap network device. +# +# Set user/group to the user/group that will be using the tap +# (e.g., the user that will run the VM that will use this tap). + +[NetDev] +Name=tap0 +Kind=tap + +[Tap] +#User= +#Group= diff --git a/etc/private/systemd-networkd/20-br0-eth0.network b/etc/private/systemd-networkd/20-br0-eth0.network new file mode 100644 index 0000000..c57736f --- /dev/null +++ b/etc/private/systemd-networkd/20-br0-eth0.network @@ -0,0 +1,12 @@ +# Add the ethernet interface to the bridge. +# +# Change eth0 to your ethernet interface name. + +[Match] +Name=eth0 + +[Network] +Bridge=br0 + +[Link] +RequiredForOnline=no diff --git a/etc/private/systemd-networkd/20-br0-tap0.network b/etc/private/systemd-networkd/20-br0-tap0.network new file mode 100644 index 0000000..1c2c746 --- /dev/null +++ b/etc/private/systemd-networkd/20-br0-tap0.network @@ -0,0 +1,16 @@ +# Add the tap interface to the bridge. +# +# Note: do not assign MAC address to the tap interface, it's not the same +# thing as the interface inside the VM (which is what we want to assign the +# MAC address to). +# + +[Match] +Name=tap0 + +[Network] +Bridge=br0 +#ConfigureWithoutCarrier=yes + +[Link] +RequiredForOnline=no diff --git a/etc/private/systemd-networkd/30-br0-dhcp.network b/etc/private/systemd-networkd/30-br0-dhcp.network new file mode 100644 index 0000000..864fe3d --- /dev/null +++ b/etc/private/systemd-networkd/30-br0-dhcp.network @@ -0,0 +1,14 @@ +# Configure the bridge with IPv4 DHCP. + +[Match] +Name=br0 + +[Network] +DHCP=ipv4 +IPForward=yes + +[DHCPv4] +#UseHostname=yes + +[Link] +RequiredForOnline=yes diff --git a/etc/private/systemd-networkd/README b/etc/private/systemd-networkd/README new file mode 100644 index 0000000..2db3904 --- /dev/null +++ b/etc/private/systemd-networkd/README @@ -0,0 +1,100 @@ +This directory contains sample configuration files for setting up a bridge +(br0) and a permanent tap interface (tap0) using systemd's networkd network +manager. The tap interface can be used, for example, to run a virtual machine +that appears as a real machine on the host's Ethernet network. + +Assumptions: + + - The host's Ethernet interface is eth0. + - The host uses IPv4 DHCP for network configuration. + +Note: only perform the following steps over a physical login to the host since +the configuration involves bringing the host's networking down. + + +1. Switch to systemd-networkd for network configuration. + +Overall, the goal of this step is to disable the currently used network +manager and enable systemd-networkd. First check if systemd-networkd is +already used: + +# systemctl status systemd-networkd + +If it's enabled and running, skip to step 2. Otherwise, identify the currently +used network manager. The possible options depend on the distribution used so +consult the relevant documentation for details. One common option is the GNOME +network manager: + +# systemctl status NetworkManager + +If it's enabled and running, stop and disable: + +# systemctl stop NetworkManager +# systemctl disable NetworkManager + +For Debian-based distributions a common approach is to define the network +configuration in the /etc/network/interfaces file. To disable this method, +perform the following steps: + +# systemctl stop networking +# mv /etc/network/interfaces /etc/network/interfaces.disabled + +Once the current network manager is disabled, proceed to step 2. + + +2. Configure bridged networking using systemd-networkd. + +Copy configuration files found in this directory to /etc/systemd/network/ (see +the comment at the beginning of each file for its purpose): + +# cp *.netdev *.network /etc/systemd/network/ + +Note: if you are already using systemd-networkd, then you may already have +some configuration in /etc/systemd/network/. If the existing configuration +conflicts with this setup (for example, you already have a configuration +for eth0), then you will need to remove the relevant files. + +Then adjust the following to match your setup: + + - Ethernet interface name if not eth0: 20-br0-eth0.network (both name and + content) + + - Bridge MAC address: 10-br0.netdev + + Use your Ethernet interface's address as your bridge address, which + you can obtain with: + + # ip link show eth0 + + - Tap user/group: 10-tap0.netdev + + For example, set to the user/group that will run the VM that will use this + tap interface. + + +3. Test and enable networking using systemd-networkd. + +Once the configuration is complete, start/restart systemd-networkd and verify +networking is configured correctly. + +# systemctl restart systemd-networkd +# systemctl status systemd-networkd +# ip addr show br0 +# ip addr show tap0 + +Specifically, verify that: + + - The br0 MAC address is correct. + + - The br0 interface is assigned (via DHCP) an IP address and, if a fixed + IP is used, it's what's expected. + + - Try to ping example.org to confirm the overall network (routing, DNS) + is functional. + +If everything looks good, enable systemd-networkd: + +# systemctl enable systemd-networkd + +You may also want to reboot the host and performs the above verifications +one more time. -- cgit v1.1