This guide shows how to install and configure brep on a "deployment" machine as opposed to a "development" one (see INSTALL-DEV for the latter). Here we assume you are using a systemd-based distribution. If not, then you will need to replace systemctl commands with the equivalent init.d ones. 1. Create 'brep' User This user will be used to run the brep repository loader. We will also use its home directory to build and install the brep module, store its configuration, etc. We create this user with a disabled password so only root will be able to operate as brep. Because of this restriction we will allow brep to run sudo without a password: # adduser --disabled-password brep # echo "brep ALL=(ALL) NOPASSWD:ALL" >/etc/sudoers.d/brep # chmod 0440 /etc/sudoers.d/brep In the rest of this guide commands that start with the $ shell prompt are expected to be executed as the brep user and in its home directory (those that start with # as above are run as root). To change to the brep user from root, do: # su -l brep 2. Install Prerequisites a) Install a C++ compiler using your distribution's package. Also make sure the pkg-config (or one of its replacements) is installed. b) Install PostgreSQL 9.x and Apache2 using your distribution's packages. Also check that the files in /home/brep are readable by "others". If they are not, then run the following command to grant Apache2 read access: $ setfacl -m g:www-data:rx /home/brep $ setfacl -dm g:www-data:rx /home/brep In the above command and in the rest of this guide replace www-data with the user name under which Apache2 is running (See the "User" directive in the Apache2 .conf file). [Note that strictly speaking www-data in the above command is the Apache2 group, not user. However, most installations use the same name for both.] c) Install PostgreSQL and Apache2 development files. Specifically, we need PostgreSQL's libpq and Apache's libapr and web server development files. Below are the names of their packages for some distributions: Debian/Ubuntu: libpq-dev libapr1-dev apache2-dev Fedora/RHEL: posqtgresql-devel apr-devel httpd-devel FreeBSD: postgresql94-client apr apache24 d) Unless you already have the build2 toolchain installed, download (normally from https://download.build2.org) and install build2-toolchain by following its INSTALL file instructions. You can build build2-toolchain using brep's login and in its home directory. Note that brep loader (discussed below) runs bpkg so it makes sense to have both from the same release. 3. Build and Install brep Normally the only extra information that you need to provide on this step is the location of the Apache2 headers (httpd.h, etc). Below are their locations for some distributions: Debian/Ubuntu: /usr/include/apache2 Fedora/RHEL: /usr/include/httpd FreeBSD: /usr/local/include/apache24 You can also use the Apache2 apxs utility to obtain this information as shown below. $ mkdir brep $ cd brep bpkg create \ cc \ config.cc.poptions="-I$(apxs -q includedir)" \ config.bin.rpath=/home/brep/install/lib \ config.install.root=/home/brep/install bpkg add https://pkg.cppget.org/1/alpha bpkg fetch bpkg build brep ?sys:libapr1 ?sys:libpq bpkg install brep $ cd .. # Back to brep home. 4. Create PostgreSQL User and Database $ sudo sudo -u postgres psql # Note: double sudo is not a mistake. CREATE DATABASE brep TEMPLATE template0 ENCODING 'UTF8' LC_COLLATE 'en_US.UTF8' LC_CTYPE 'en_US.UTF8'; CREATE USER brep; GRANT ALL PRIVILEGES ON DATABASE brep TO brep; CREATE USER "www-data" INHERIT IN ROLE brep; Exit psql (^D), then make sure the logins work: $ psql ^D $ sudo sudo -u www-data psql -d brep ^D To troubleshoot, see PostgreSQL logs. 5. Create Database Schema and Load Repositories $ mkdir config $ edit config/brep-load.conf # Loader configuration, see brep-load(1). $ install/bin/brep-migrate $ install/bin/brep-load config/brep-load.conf To verify: $ psql -c 'SELECT name, summary FROM repository' 6. Setup Apache2 Module $ cp install/share/brep/etc/brep-module.conf config/ $ edit config/brep-module.conf # Adjust default values if required. If you are happy to run with the default values, you can instead do: $ ln -s ../install/share/brep/etc/brep-module.conf config/ Here we assume you have setup an appropriate Apache2 virtual server. Open the corresponding Apache2 .conf file and add the following inside VirtualHost (you can also find this fragment in install/share/brep/etc/brep-apache2.conf): # Load the brep module. # LoadModule brep_module /home/brep/install/libexec/brep/mod_brep.so # Repository root. This is the part of the URL between the host name # and the start of the repository. For example, root value /pkg means # the repository URL is http://example.org/pkg/. Specify / to use the # web server root (e.g., http://example.org/). If using a different # repository root, don't forget to also change Location and Alias # directives below. # brep-root /pkg SetHandler brep DirectoryIndex disabled DirectorySlash Off # Brep module configuration. If you prefer, you can paste the contents # of this file here. However, you will need to prefix every option with # 'brep-'. # brep-conf /home/brep/config/brep-module.conf # Static brep content (CSS files). # Error "mod_alias is not enabled" # Note: trailing slashes are important! # Alias /pkg/@/ /home/brep/install/share/brep/www/ Require all granted # You can also serve the repository files from the repository root. # For example: # # http://example.org/pkg/1/... -> /path/to/repo/1/... # #AliasMatch ^/pkg/(\d+)/(.+) /path/to/repo/$1/$2 # # # Require all granted # The output content type of the brep module is application/xhtml+xml and if you would like to make sure it gets compressed (along with linked CSS), also add the following lines: # Compress brep output (xhtml+xml) and CSS. # AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE text/css Restart Apache2: $ sudo systemctl restart apache2 To verify, visit the repository root. To troubleshoot, see Apache logs. Now that Apache2 loads the brep module which requires PostgreSQL, it is a good idea to make the Apache2 service depend on PostgreSQL so that they are started in proper order. Here is how we can do it with systemd (with newer versions you can use 'systemctl edit' instead of mkdir and cat): # mkdir -p /etc/systemd/system/apache2.service.d/ # cat >/etc/systemd/system/apache2.service.d/postgresql.conf [Unit] Requires=postgresql.service After=postgresql.service ^D # systemctl daemon-reload # systemctl cat apache2 # Verify override is listed. # systemctl restart apache2 # Verify the service still works. 7. Optimize CSS This step is optional and involves optimizing the CSS files used by brep. For example, using the sassc(1) command line tool: $ cd install/share/brep/www/ $ for i in *.scss; do sassc -s compressed $i `basename -s .scss $i`.css; done 8. Setup Periodic Loader Execution Initially this guide suggested using systemd user session support to run the loader. However, the current state of user sessions has one major drawback: they are not started/attached-to when logging in with su -l (see Debian bug #813789 for details). This limitation makes them unusable in our setup. If you still would like to use systemd to run the loader, then you can set it up as a system-wide service which runs the loader as the brep user/group. Otherwise, a cron job is a natural choice. 8.a Setup Periodic Loader Execution with cron The following crontab entry will execute the loader every five minutes: $ crontab - MAILTO= PATH=/usr/local/bin:/bin:/usr/bin */5 * * * * $HOME/install/bin/brep-load $HOME/config/brep-load.conf ^D Note that here we assume that bpkg (which is executed by brep-load) is in one of the PATH's directories (usually /usr/local/bin). 8.b Setup Periodic Loader Execution with systemd In this version we will use the systemd user session to periodically run the loader as the brep user. If your installation doesn't use systemd, then a cron job would be a natural alternative (see above). As the first step, make sure systemd user sessions support is working for the brep user: $ systemctl --user status If there are any errors, make sure the dbus and libpam-systemd packages are installed, relogin as brep, and try again. If it still doesn't work, google for the error message and your distribution name. Next enable the brep's systemd session to remain running after logging off since we want the loader to run even when we are not logged in: $ sudo loginctl enable-linger brep $ mkdir -p .config/systemd/user $ cp install/share/brep/etc/systemd/brep-load.* .config/systemd/user/ Start the service to make sure there are no issues: $ systemctl --user start brep-load.service $ journalctl Start the timer and monitor it to make sure it fires: $ systemctl --user start brep-load.timer $ journalctl -f If everything looks good, enable the timer to be started at boot time: $ systemctl --user enable brep-load.timer 9. Upgrade Procedure During upgrade we will stop apache for what should normally be a short period of time. To ensure that there are no surprises, for production environments it is generally recommended to first perform the upgrade on a staging machine, for example, a VM with an identical setup. Save the previous installation and configuration, for example, using the brep version as a suffix: $ cp -r config config-`cat install/share/doc/brep/version` $ cp -r install install-`cat install/share/doc/brep/version` Build new version of brep: $ cd brep $ bpkg fetch $ bpkg build brep If you are using a systemd-based setup, then stop and disable the loader: $ systemctl --user disable --now brep-load.timer $ systemctl --user stop brep-load.service If you are using a cron-based setup, then it is not worth it commenting out the job entry. If the new version of the loader gets executed before or during the migration, then it will fail and you will get an email with the diagnostics. Other than that, it should be harmless. Stop apache: $ sudo systemctl stop apache2 Install new brep: $ rm -rf install/* $ bpkg install brep $ cd .. Review brep-module.conf changes that may need to be merged: $ diff -u install/share/brep/etc/brep-module.conf config/brep-module.conf Migrate database schema: $ install/bin/brep-migrate Note that if instead you need to recreate the whole database (e.g., migration is not possible), then one way to do it would be: $ psql -c 'DROP OWNED BY brep' If using systemd, then start and enable the loader: $ systemctl --user start brep-load.service $ systemctl --user status brep-load.service If everything looks good, enable periodic execution: $ systemctl --user enable --now brep-load.timer If using cron, then simply wait for the next run. You can also do a manual load: $ install/bin/brep-load config/brep-load.conf Next, start apache: $ sudo systemctl start apache2 To verify, visit the repository root. To troubleshoot, see Apache logs. You will also need to repeat the CSS optimization step above.