diff options
author | Boris Kolpackov <boris@codesynthesis.com> | 2016-09-06 14:05:33 +0200 |
---|---|---|
committer | Boris Kolpackov <boris@codesynthesis.com> | 2016-09-06 14:05:33 +0200 |
commit | f8e7bd47ac8227db59d8eadbc79deb8e807e0b6a (patch) | |
tree | 1c2e60332df78e762a42f10d2cffa46973ad2308 | |
parent | 793de43268a8f82e2ee831e1ff4f34de03c055a8 (diff) |
Add manual bootstrap steps for MSVC and MinGW
-rw-r--r-- | BOOTSTRAP-MINGW.cli | 156 | ||||
-rw-r--r-- | BOOTSTRAP-MSVC.cli | 156 | ||||
-rw-r--r-- | BOOTSTRAP-UNIX.cli | 36 |
3 files changed, 329 insertions, 19 deletions
diff --git a/BOOTSTRAP-MINGW.cli b/BOOTSTRAP-MINGW.cli index 8f6591d..440ef68 100644 --- a/BOOTSTRAP-MINGW.cli +++ b/BOOTSTRAP-MINGW.cli @@ -37,4 +37,160 @@ use just \c{g++} for the compiler: \ > .\build-mingw.bat g++ \ + +Note also that about half way (\c{bpkg fetch} on step 4 below) the script will +stop and prompt you to verify the authenticity of the repository certificate. + +The end result of the bootstrap process (performed either with the script or +manually) is the installed toolchain as well as the \c{bpkg} configuration in +\c{build2-toolchain-X.Y\\} that can be used to \l{#UPGRADE upgrade} to newer +versions. It can also be used to uninstall the toolchain: + +\ +> cd build2-toolchain-X.Y +> bpkg uninstall build2 bpkg +\ + +The rest of this section outlines the manual bootstrap process. + +\dl| + +\li|1. Bootstrap, Phase 1\n + +First, we build a minimal build system with the provided +\c{bootstrap-mingw.bat} batch file. Normally, the only argument you will pass +to this script is the C++ compiler to use but there is also a way to specify +compile options; run \c{bootstrap-mingw.bat /?} and see the +\c{build2\\INSTALL} file for details. + +\ +> cd build2 +> .\bootstrap-mingw.bat g++ -static + +> build2\b-boot --version +\ + +| + +\li|\n2. Bootstrap, Phase 2\n + +Then, we rebuild the build system with the result of Phase 1 linking +libraries statically. + +\ +> build2\b-boot config.cxx=g++ config.bin.lib=static +> move /y build2\b.exe build2\b-boot.exe + +> build2\b-boot --version +\ + +| + +\li|\n3. Stage\n + +On this step the entire toolchain is built and staged: + +\ +> run cd .. # Back to build2-toolchain-X.Y.Z\ + +> build2\build2\b-boot configure ^ + config.cxx=g++ ^ + config.bin.lib=shared ^ + config.bin.suffix=-stage ^ + config.install.root=C:\build2 ^ + config.install.data_root=root\stage + +> build2\build2\b-boot install +\ + +The strange-looking \c{config.install.data_root=root\\stage} means install +data files (as opposed to executable files) into the \c{stage\\} subdirectory +of wherever \c{config.install.root} points to (so in our case it will be +\c{C:\\build2\\stage\\}). This subdirectory is temporary and will be removed +in a few steps. + +Verify the toolchain binaries can be found and work (this relies on the +\c{PATH} environment variable we have set earlier): + +\ +> where b-stage +C:\build2\bin\b-stage.exe + +> where bpkg-stage +C:\build2\bin\bpkg-stage.exe + +> b-stage --version +> bpkg-stage --version +\ + +On the next step we will use \c{bpkg} to build and install the \"final\" +toolchain. If for some reason you prefer not to build from packages (for +example, because the machine is offline), then you can convert this step into +the \"final\" installation and skip the rest. For this your will need to +change the \c{configure} command line above along these lines: + +\ +> build2\build2\b-boot configure ^ + config.cxx=g++ ^ + config.cc.coptions=-O3 ^ + config.bin.lib=shared ^ + config.install.root=C:\build2 +\ + +| + +\li|\n4. Install\n + +Next, we use the staged toolchain to build and install the \"final\" toolchain +from the package repository using the \c{bpkg} package manager. First, we +create the \c{bpkg} configuration. The configuration values are pretty similar +to the previous step and you may want/need to make similar adjustments. + +\ +> cd .. # Back to build2-build\ +> md build2-toolchain-X.Y +> cd build2-toolchain-X.Y + +> bpkg-stage create ^ + cc ^ + config.cxx=g++ ^ + config.cc.coptions=-O3 ^ + config.bin.lib=shared ^ + config.install.root=C:\build2 +\ + +Next, we add the package repository, build, and install: + +\ +> bpkg-stage add https://pkg.cppget.org/1/alpha +> bpkg-stage fetch +> bpkg-stage build build2 bpkg +> bpkg-stage install build2 bpkg +\ + +Finally, we verify the result: + +\ +> where b +C:\build2\bin\b.exe + +> where bpkg +C:\build2\bin\bpkg.exe + +> b --version +> bpkg --version +\ + +| + +\li|\n5. Clean\n + +The last thing we need to do is uninstall the staged toolchain: + +\ +> cd ..\build2-toolchain-X.Y.Z # Back to bootstrap. +> b uninstall +\ + +|| " diff --git a/BOOTSTRAP-MSVC.cli b/BOOTSTRAP-MSVC.cli index 5916d55..0ade62d 100644 --- a/BOOTSTRAP-MSVC.cli +++ b/BOOTSTRAP-MSVC.cli @@ -26,4 +26,160 @@ prompt) like this: \ > .\build-msvc.bat \ + +Note also that about half way (\c{bpkg fetch} on step 4 below) the script will +stop and prompt you to verify the authenticity of the repository certificate. + +The end result of the bootstrap process (performed either with the script or +manually) is the installed toolchain as well as the \c{bpkg} configuration in +\c{build2-toolchain-X.Y\\} that can be used to \l{#UPGRADE upgrade} to newer +versions. It can also be used to uninstall the toolchain: + +\ +> cd build2-toolchain-X.Y +> bpkg uninstall build2 bpkg +\ + +The rest of this section outlines the manual bootstrap process. + +\dl| + +\li|1. Bootstrap, Phase 1\n + +First, we build a minimal build system with the provided +\c{bootstrap-msvc.bat} batch file. Normally, the only argument you will pass +to this script is the C++ compiler to use but there is also a way to specify +compile options; run \c{bootstrap-msvc.bat /?} and see the \c{build2\\INSTALL} +file for details. + +\ +> cd build2 +> .\bootstrap-msvc.bat cl + +> build2\b-boot --version +\ + +| + +\li|\n2. Bootstrap, Phase 2\n + +Then, we rebuild the build system with the result of Phase 1 linking libraries +statically. + +\ +> build2\b-boot config.cxx=cl config.bin.lib=static +> move /y build2\b.exe build2\b-boot.exe + +> build2\b-boot --version +\ + +| + +\li|\n3. Stage\n + +On this step the entire toolchain is built and staged: + +\ +> run cd .. # Back to build2-toolchain-X.Y.Z\ + +> build2\build2\b-boot configure ^ + config.cxx=cl ^ + config.bin.lib=shared ^ + config.bin.suffix=-stage ^ + config.install.root=C:\build2 ^ + config.install.data_root=root\stage + +> build2\build2\b-boot install +\ + +The strange-looking \c{config.install.data_root=root\\stage} means install +data files (as opposed to executable files) into the \c{stage\\} subdirectory +of wherever \c{config.install.root} points to (so in our case it will be +\c{C:\\build2\\stage\\}). This subdirectory is temporary and will be removed +in a few steps. + +Verify the toolchain binaries can be found and work (this relies on the +\c{PATH} environment variable we have set earlier): + +\ +> where b-stage +C:\build2\bin\b-stage.exe + +> where bpkg-stage +C:\build2\bin\bpkg-stage.exe + +> b-stage --version +> bpkg-stage --version +\ + +On the next step we will use \c{bpkg} to build and install the \"final\" +toolchain. If for some reason you prefer not to build from packages (for +example, because the machine is offline), then you can convert this step into +the \"final\" installation and skip the rest. For this your will need to +change the \c{configure} command line above along these lines: + +\ +> build2\build2\b-boot configure ^ + config.cxx=cl ^ + \"config.cc.coptions=/O2 /Oi\" ^ + config.bin.lib=shared ^ + config.install.root=C:\build2 +\ + +| + +\li|\n4. Install\n + +Next, we use the staged toolchain to build and install the \"final\" toolchain +from the package repository using the \c{bpkg} package manager. First, we +create the \c{bpkg} configuration. The configuration values are pretty similar +to the previous step and you may want/need to make similar adjustments. + +\ +> cd .. # Back to build2-build\ +> md build2-toolchain-X.Y +> cd build2-toolchain-X.Y + +> bpkg-stage create ^ + cc ^ + config.cxx=cl ^ + \"config.cc.coptions=/O2 /Oi\" ^ + config.bin.lib=shared ^ + config.install.root=C:\build2 +\ + +Next, we add the package repository, build, and install: + +\ +> bpkg-stage add https://pkg.cppget.org/1/alpha +> bpkg-stage fetch +> bpkg-stage build build2 bpkg +> bpkg-stage install build2 bpkg +\ + +Finally, we verify the result: + +\ +> where b +C:\build2\bin\b.exe + +> where bpkg +C:\build2\bin\bpkg.exe + +> b --version +> bpkg --version +\ + +| + +\li|\n5. Clean\n + +The last thing we need to do is uninstall the staged toolchain: + +\ +> cd ..\build2-toolchain-X.Y.Z # Back to bootstrap. +> b uninstall +\ + +|| " diff --git a/BOOTSTRAP-UNIX.cli b/BOOTSTRAP-UNIX.cli index 68b5fee..a31c513 100644 --- a/BOOTSTRAP-UNIX.cli +++ b/BOOTSTRAP-UNIX.cli @@ -80,7 +80,7 @@ While this will use Clang and install into \c{/opt/build2}: $ ./build.sh --install-dir /opt/build2 --sudo sudo clang++ \ -Note also that about half way (\c{bpkg fetch} on step 6 below) the script will +Note also that about half way (\c{bpkg fetch} on step 4 below) the script will stop and prompt you to verify the authenticity of the repository certificate. To run the script unattended you can specify the certificate fingerprint with the \c{--trust} option. @@ -95,12 +95,11 @@ $ cd build2-toolchain-X.Y $ bpkg uninstall build2 bpkg \ -The rest of this section outlines the manual bootstrap with the step numbering -continued from the above list. +The rest of this section outlines the manual bootstrap process. \dl| -\li|3. Bootstrap, Phase 1\n +\li|1. Bootstrap, Phase 1\n First, we build a minimal build system with the provided \c{bootstrap.sh} script. Normally, the only argument you will pass to this script is the @@ -117,7 +116,7 @@ $ build2/b-boot --version | -\li|\n4. Bootstrap, Phase 2\n +\li|\n2. Bootstrap, Phase 2\n Then, we rebuild the build system with the result of Phase 1 linking libraries statically. @@ -131,19 +130,12 @@ $ build2/b-boot --version | -\li|\n5. Stage\n +\li|\n3. Stage\n On this step the entire toolchain is built and staged. Here you may want to adjust a few things, such as the installation directory or the \c{sudo} program (remove the \c{config.install.sudo} line if you don't need one). -The strange-looking \c{config.install.data_root=root/stage} means install -data files (as opposed to executable files) into the \c{stage/} subdirectory -of wherever \c{config.install.root} points (so in our case it will be -\c{/usr/local/stage/}). Note that this subdirectory is temporary and will be -removed in a few steps. But if you don't like the default location, feel -free to change it (for example, to \c{/tmp/stage}). - You may also need to remove the \c{config.bin.rpath} line if your target doesn't support \i{rpath}. Specifically, if building on Windows (with MSYS or Cygwin), remove both \c{.rpath} and \c{.sudo}. But if unsure, leave \c{.rpath} @@ -165,6 +157,13 @@ $ build2/build2/b-boot configure \ $ build2/build2/b-boot install \ +The strange-looking \c{config.install.data_root=root/stage} means install +data files (as opposed to executable files) into the \c{stage/} subdirectory +of wherever \c{config.install.root} points to (so in our case it will be +\c{/usr/local/stage/}). Note that this subdirectory is temporary and will be +removed in a few steps. But if you don't like the default location, feel +free to change it (for example, to \c{/tmp/stage}). + Depending on the installation directory, the installed \c{build2} binaries may not be automatically found. On most platforms \c{/usr/local/bin/} is in the \c{PATH} environment variable by default and you should be able to run: @@ -212,7 +211,7 @@ $ build2/build2/b-boot configure \ | -\li|\n6. Install\n +\li|\n4. Install\n Next, we use the staged toolchain to build and install the \"final\" toolchain from the package repository using the \c{bpkg} package manager. First, we @@ -252,21 +251,20 @@ $ which b $ which bpkg /usr/local/bin/bpkg -$ b-stage --version -$ bpkg-stage --version +$ b --version +$ bpkg --version \ | -\li|\n7. Clean\n +\li|\n5. Clean\n The last thing we need to do is uninstall the staged toolchain: \ -$ cd ../build2-toolchain-X.Y.Z/ # Back to bootstrap. +$ cd ../build2-toolchain-X.Y.Z # Back to bootstrap. $ b uninstall \ || - " |