From d7b3619dad84f4f24aa3ab6629246a3324bdc2cd Mon Sep 17 00:00:00 2001 From: Boris Kolpackov Date: Thu, 3 Aug 2023 09:23:44 +0200 Subject: Document target types in manual (GH issue #309) --- doc/manual.cli | 619 +++++++++++++++++++++++++++++++++++++++++++++++-- libbuild2/bin/init.cxx | 3 + 2 files changed, 606 insertions(+), 16 deletions(-) diff --git a/doc/manual.cli b/doc/manual.cli index 2083bfa..5ccf351 100644 --- a/doc/manual.cli +++ b/doc/manual.cli @@ -275,7 +275,8 @@ above listings. In our \c{buildfile} we refer to the executable target as extension, if any, will be determined based on the compiler's target platform by the rule doing the linking. In this sense, target types are a platform-independent replacement of file extensions (though they do have other -benefits, such as allowing non-file targets as well as being hierarchical). +benefits, such as allowing non-file targets as well as being hierarchical; +see \l{#targets-types Target Types} for details). Let's revisit the dependency declaration line from our \c{buildfile}: @@ -681,7 +682,8 @@ notation for \c{dir{\}}. As we will see shortly, it fits naturally with other uses of directories in \c{buildfiles} (for example, in scopes). The \c{dir{\}} target type is an \i{alias} (and, in fact, is derived from more -general \c{alias{\}}). Building it means building all its prerequisites. +general \c{alias{\}}; see \l{#targets-types Target Types} for +details). Building it means building all its prerequisites. \N|If you are familiar with \c{make}, then you can probably see the similarity with the ubiquitous \c{all} pseudo-target. In \c{build2} we instead use @@ -4220,18 +4222,8 @@ files as belonging to unit tests. Because it is a second-level extension, we have to indicate this fact to the pattern matching machinery with the trailing triple dot (meaning \"there are more extensions coming\"). If we didn't do that, \c{.test} would have been treated as a first-level extension explicitly -specified for our source files. - -\N|If you need to specify a name that does not have an extension, then end it -with a single dot. For example, for a header \c{utility} you would write -\c{hxx{utility.\}}. If you need to specify a name with an actual trailing dot, -then escape it with a double dot, for example, \c{hxx{utility..\}}. - -More generally, anywhere in a name, a double dot can be used to specify a dot -that should not be considered the extension separator while a triple dot \- -which should. For example, in \c{obja{foo.a.o\}} the extension is \c{.o} and -if instead we wanted \c{.a.o} to be considered the extension, then we could -rewrite it either as \c{obja{foo.a..o\}} or as \c{obja{foo...a.o\}}.| +specified for our source files (see \l{#targets-types Target Types} for +details). The next couple of lines set target type/pattern-specific variables to treat all unit test executables as tests that should not be installed: @@ -5750,8 +5742,8 @@ patterns/matches that do not already contain an extension. Then the filesystem search is performed for matching files. For example, the \c{cxx{\}} target type obtains the default extension from the -\c{extension} variable. Assuming we have the following line in our -\c{root.build}: +\c{extension} variable (see \l{#targets-types Target Types} for background). +Assuming we have the following line in our \c{root.build}: \ cxx{*}: extension = cxx @@ -5844,6 +5836,16 @@ info $(file{bar}: y) # s w \N{This chapter is a work in progress and is incomplete.} +\h#directives-define|\c{define}| + +\ +define : +\ + +Define a new target type \c{} by inheriting from existing target type +\c{}. See \l{#targets-types Target Types} for details. + + \h#directives-include|\c{include}| \ @@ -5870,6 +5872,366 @@ of the same file in the same scope are not automatically ignored. See also \l{#directives-include \c{include}}. + +\h1#targets|Targets and Target Types| + +\N{This chapter is a work in progress and is incomplete.} + + +\h#targets-types|Target Types| + +A target type is part of a target's identity. The core idea behind the concept +of target types is to abstract away from file extensions which can vary from +project to project (for example, C++ source files extensions) or from platform +to platform (for example, executable file extensions). It also allows us to +have non-file-based targets. + +Target types form a \i{base-derived} inheritance tree. The root of this tree +is the abstract \c{target{\}} type. The \c{build2} core defines a number of +standard target types, such as \c{file{\}}, \c{doc{\}}, and \c{exe{\}}. Build +system modules can define additional target types that are based on the +standard ones (or on types defined by other modules). For example, the \c{c} +module that provides the C compilation support defines the \c{h{\}} and +\c{c{\}} target types. Finally, \c{buildfiles} can derive project-local target +types using the \c{define} directive. + +\N|If a target type represents a file type with a well-established extension, +then by convention such an extension is used as the target type name. For +example, the C language header and source files use the \c{.h} and \c{.c} +extensions and the target types are called \c{h{\}} and \c{c{\}}. + +Speaking of conventions, as you may have noticed, when mentioning a target +type we customarily add \c{{\}} after its name. We found that this helps with +comprehension since target type names are often short (you can also search for +\c{{} to narrow it down to target types). In a way this is a similar +approach to adding \c{()} after a function name except here we use \c{{\}}, +which mimics target type usage in target names, for example \c{c{hello\}} for +\c{hello.c}.| + +The following listing shows the hierarchy of the standard target types defined +by the \c{build2} core (the abstract target types are marked with \c{*}) while +the following sections describe each standard target type in detail. For +target types defined by a module refer to the respective module documentation. + +\ + .-----target*------------. + | | | + mtime_target*---. alias fsdir + | | | + path_target* group dir + | + .---------file----. + | | | + .----doc-----. exe buildfile + | | | +legal man manifest + | + man +\ + +While target types replace (potentially variable) extensions, there still +needs to be a mechanism for specifying them since in most cases targets have +to be mapped to files. There are several ways this can be achieved. + +If a target type represents a file type with a well-established extension, +then such an extension is normally used by default and we don't need to take +any extra steps. For example the \c{h{\}} and \c{c{\}} target types for C +header and source files default to the \c{.h} and \c{.c} extensions, +respectively, and if our project follows this convention, then we can simply +write: + +\ +exe{utility}: c{utility} h{utility} +\ + +And \c{c{utility\}} will be mapped to \c{utility.c} and \c{h{utility\}} \- +to \c{utility.h}. + +There are two variants of this default extension case: fixed extension and +customizable extension. A target type may choose to fix the default extension +if it's a bad idea to deviate from the default extension. A good example of +such a target is \c{man1{\}}, which fixes the default extension to be +\c{.1}. More commonly, however, a target will have a default extension but +will allow customizing it with the \c{extension} variable. + +A good example where extension customization is often required are the +\c{hxx{\}} and \c{cxx{\}} target types for C++ header and source files, which +default to the \c{.hxx} and \c{.cxx} extensions, respectively. If our project +uses other extensions, for example, \c{.hpp} and \c{.cpp}, then we can adjust +the defaults (typically done in \c{root.build}, after loading the \c{cxx} +module): + +\ +hxx{*}: extension = hpp +cxx{*}: extension = cpp +\ + +Then we can write: + +\ +exe{utility}: cxx{utility} hxx{utility} +\ + +And \c{cxx{utility\}} will be mapped to \c{utility.cpp} and \c{hxx{utility\}} +\- to \c{utility.hpp}. + +What about \c{exe{utility\}}, where does its extension come from? This is an +example of a target type with an extension that varies from platform to +platform. In such cases the extension is expected to be assigned by the rule +that matches the target. In the above example, the link rule from the \c{cxx} +module that matches updating \c{exe{utility\}} will assign a suitable +extension based on the target platform of the C++ compiler that it was +instructed to use. + +Finally, it is always possible to specify the file extension explicitly as +part of the target name. For example: + +\ +exe{utility}: cxx{utility.cc} hxx{utility.hh} +\ + +This is normally only needed if the default extension is not appropriate or if +the target type does not have a default extension, as is the case, for +example, for the \l{#targets-types-file \c{file{\}}} and \l{#targets-types-doc +\c{doc{\}}} target types. This mechanism can also be used to override the +automatically derived extension. For example: + +\ +exe{($cxx.target.class == 'windows' ? utility.com : utility)}: ... +\ + +\N|If you need to specify a name that does not have an extension, then end it +with a single dot. For example, for a header \c{utility} you would write +\c{hxx{utility.\}}. If you need to specify a name with an actual trailing dot, +then escape it with a double dot, for example, \c{hxx{utility..\}}. + +More generally, anywhere in a name, a double dot can be used to specify a dot +that should not be considered the extension separator while a triple dot \- +which should. For example, in \c{obja{foo.a.o\}} the extension is \c{.o} and +if instead we wanted \c{.a.o} to be considered the extension, then we could +rewrite it either as \c{obja{foo.a..o\}} or as \c{obja{foo...a.o\}}.| + +To derive a new target type in a \c{buildfile} we use the \c{define} +directive. Such target types are project-local, meaning they cannot be +exported to other projects. Typically this is used to provide a more +meaningful name to a set of files and also avoid having to specify their +extensions explicitly. Compare: + +\ +./: doc{README.md PACKAGE-README.md INSTALL.md} +\ + +To: + +\ +define md: doc +doc{*}: extension = md + +./: md{README PACKAGE-README INSTALL} +\ + + +\h2#targets-types-target|\c{target{\}}| + +The \c{target{\}} target type is a root of the target type hierarchy. It is +abstract and is not commonly used directly, except perhaps in patterns (target +type/pattern-specific variable, pattern rules). + + +\h2#targets-types-alias|\c{alias{\}} and \c{dir{\}}| + +The \c{alias{\}} target type is used for non-file-based targets that serve as +aliases for their prerequisite. + +\N|Alias targets in \c{build2} are roughly equivalent to phony targets in +\c{make}.| + +For example: + +\ +alias{tests}: exe{test1 test2 test3} +\ + +\ +$ b test: alias{tests} +\ + +An \c{alias{\}} target can also serve as an \"action\" if supplied with an ad +hoc recipe (or matched by an ad hoc pattern rule). For example: + +\ +alias{strip}: exe{hello} +{{ + diag strip $< + strip $path($<) +}} +\ + +The \c{dir{\}} target type is a special kind of alias that represents a +directory. Building it means building everything inside the directory. See +\l{#intro-proj-struct Project Structure} for background. + +A target without a type that ends with a directory separator (\c{/}) is +automatically treated as \c{dir{\}}. For example, the following two lines are +equivalent: + +\ +./: exe{test1 test2} +dir{./}: exe{test1 test2} +\ + +Omitting the target type in such situations is customary. + + +\h2#targets-types-fsdir|\c{fsdir{\}}| + +The \c{fsdir{\}} target type represents a filesystem directory. Unlike +\c{dir{\}} above, it is not an alias and listing an \c{fsdir{\}} directory as +a prerequisite of a target will cause that directory to be created on +\c{update} and removed on \c{clean}. + +While we usually don't need to list explicit \c{fsdir{\}} prerequisites for +our targets, one situation where this is necessary is when the target resides +in a subdirectory that does not correspond to an existing source directory. A +typical example of this situation is placing object files into subdirectories. +Compare: + +\ +obj{foo}: c{foo} +sub/obj{bar}: c{bar} fsdir{sub/} +\ + + +\h2#targets-types-mtime-path|\c{mtime_target{\}} and \c{path_target{\}}| + +The \c{mtime_target{\}} target type represents a target that uses modification +times to determine if it is out of date. The \c{path_target{\}} target type +represents a target that has a corresponding filesystem entry. It is derived +from \c{mtime_target{\}} and uses the modification time of that filesystem +entry to determine if the target is out of date. + +Both of these target types are abstract and are not commonly used directly, +except perhaps in patterns (target type/pattern-specific variable, pattern +rules). + + +\h2#targets-types-group|\c{group{\}}| + +The \c{group{\}} target type represents a user-defined explicit target group, +that is, a target that has multiple member targets that are all built together +with a single recipe. + +Normally this target type is not used to declare targets or prerequisites but +rather as a base of a derived group. If desired, such a derived group can be +marked with an attribute as \"see-through\", meaning that when the group is +listed as a prerequisite of a target, the matching rule \"sees\" its members, +rather than the group itself. For example: + +\ +define [see_through] thrift_cxx: group +\ + + +\h2#targets-types-file|\c{file{\}}| + +The \c{file{\}} target type represents a generic file. This target type is +used as a base for most of the file-based targets and can also be used to +declare targets and prerequisites when there are no more specific target +types. + +A target or prerequisite without a target type is automatically treated as +\c{file{\}}. However, omitting a target type in such situations is not +customary. + +The \c{file{\}} target type has no default extension and one cannot be +assigned with the \c{extension} variable. As a result, if a \c{file{\}} target +has an extension, then it must be specified explicitly as part of the target +name. For example: + +\ +./: file{example.conf} +\ + +\h2#targets-types-doc|\c{doc{\}}, \c{legal{\}}, and \c{man{\}}| + +The \c{doc{\}} target type represents a generic documentation file. It has +semantics similar to \c{file{\}} (from which it derives): it can be used as a +base or declare targets/prerequisites and there is no default extension. One +notable difference, however, is that \c{doc{\}} targets are by default +installed into the \c{doc/} installation location (see \l{#module-install +\c{install} Module}). For example: + +\ +./: doc{README.md ChangeLog.txt} +\ + +The \c{legal{\}} target type is derived from \c{doc{\}} and represents a legal +documentation file, such as a license, copyright notice, authorship +information, etc. The main purpose of having a separate target type like this +is to help with installing licensing-related files into a different +location. To this effect, \c{legal{\}} targets are installed into the +\c{legal/} installation location, which by default is the same as \c{doc/} but +can be customized. For example: + +\ +./: legal{COPYRIGHT LICENSE AUTHORS.md} +\ + +The \c{man{\}} target type is derived from \c{doc{\}} and represents a manual +page. This target type requires an explicit extension specification and is +installed into the \c{man/} installation location + +\N|If you are using the \c{man{\}} target type directly (instead of one of +\c{man{\}} described below), for example, to install a localized version of +a man page, then you will likely need to adjust the installation location +on the per target basis.| + +The \c{man{\}} target types (where \c{} is an integer between 1 and 9) +are derived from \c{man{\}} and represent manual pages in the respective +sections. These target types have fixed default extensions \c{.} (but an +explicit extension can still be specified, for example \c{man1{foo.1p\}}) and +are installed into the \c{man/} installation locations. For example: + +\ +./: man1{foo} +\ + + +\h2#targets-types-exe|\c{exe{\}}| + +The \c{exe{\}} target type represents an executable file. Executables in +\c{build2} appear in two distinct but sometimes overlapping contexts: We can +build an executable target, for example from C source files. Or we can list an +executable target as a prerequisite in order to execute it as part of a +recipe. And sometimes this can be the same executable target. For example, +one project may build an executable target that is a source code generator and +another project may import this executable target and use it in its recipes in +order to generate some source code. + +To support this semantics the \c{exe{\}} target type has a peculiar default +extension logic. Specifically, if the \c{exe{\}} target is \"output\", then +the extension is expected to be assigned by the matching rule according to the +target platform for which this executable is built. But if it does not, +then we fall back to no extension (for example, a script). If, however, the +\c{exe{\}} target is \"input\" (that is, it's listed as a prerequisite and +there is no corresponding \"output\" target), then the extension of the host +platform is used as the default. + +In all these cases the extension can also be specified explicitly. This, for +example, would be necessary if the executable were a batch file: + +\ +h{generate}: exe{generate.bat} +{{ + diag $< -> $> + $< -o $path($>) +}} +\ + +Here, without the explicit extension, the \c{.exe} extension would have been +used by default. + + \h1#module-config|\c{config} Module| \N{This chapter is a work in progress and is incomplete.} @@ -6841,6 +7203,116 @@ depends: libprint [3.0.0-b.2.1 3.0.0-b.3) \N{This chapter is a work in progress and is incomplete.} +\h#module-bin-target-types|Binary Target Types| + +The following listing shows the hierarchy of the target types defined by the +\c{bin} module while the following sections describe each target type in +detail (\c{target{\}} and \c{file{\}} are standard target types defined by the +\c{build2} core; see \l{#targets-types Target Types} for details). + +\ + target----------------. + | | + ... | + | | + .---------------file------------. lib + | | | | | | libul + | libue obje bmie hbmie def obj +liba libua obja bmia hbmia bmi +libs libus objs bmis hbmis hbmi +\ + + +\h2#module-bin-target-types-lib|\c{lib{\}}, \c{liba{\}}, \c{libs{\}}| + +The \c{liba{\}} and \c{libs{\}} target types represent static (archive) and +shared libraries, respectively. + +The \c{lib{\}} target type is a group with the \c{liba{\}} and/or \c{libs{\}} +members. A rule that encounters a \c{lib{\}} prerequisite may pick a member +appropriate for the target being built or it may build all the members +according to the \c{bin.lib} variable. See \l{#intro-lib Library Exportation +and Versioning} for background. + +The \c{lib*{\}} file extensions are normally automatically assigned by the +matching rules based on the target platform. + + +\h2#module-bin-target-types-libu|\c{libul{\}}, \c{libue{\}}, \c{libua{\}}, +\c{libus{\}}| + +The \c{libu*{\}} target types represent utility libraries. Utility libraries +are static libraries with object files appropriate for linking an executable +(\c{libue{\}}), static library (\c{libua{\}}), or shared library +(\c{libus{\}}). Where possible, utility libraries are built in the +\"thin archive\" mode. + +The \c{libul{\}} target type is a group with the \c{libua{\}} and/or +\c{libus{\}} members. A rule that encounters a \c{libul{\}} prerequisite picks +a member appropriate for the target being built. + +The \c{libu*{\}} file extensions are normally automatically assigned by the +matching rules based on the target platform. + + +\h2#module-bin-target-types-obj|\c{obj{\}}, \c{obje{\}}, \c{obja{\}}, +\c{objs{\}}| + +The \c{obj*{\}} target types represent object files appropriate for linking an +executable (\c{obje{\}}), static library (\c{obja{\}}), or shared library +(\c{objs{\}}). + +\N|In \c{build2} we use distinct object files for the three types of binaries +(executable, static library, and shared library). The distinction between +static and shared libraries is made to accommodate build differences such as +the need for position-independent code (\c{-fPIC}) in shared libraries. While +in most cases the same object file can be used for executables and static +libraries, they are kept separate for consistency and generality.| + +The \c{obj{\}} target type is a group with the \c{obje{\}}, and/or +\c{obja{\}}, and/or \c{objs{\}} members. A rule that encounters an \c{obj{\}} +prerequisite picks a member appropriate for the target being built. + +The \c{obj*{\}} file extensions are normally automatically assigned by the +matching rules based on the target platform. + + +\h2#module-bin-target-types-bmi|\c{bmi{\}}, \c{bmie{\}}, \c{bmia{\}}, +\c{bmis{\}}| + +The \c{bmi*{\}} target types represent binary module interfaces (BMI) for +C++20 named modules appropriate for linking an executable (\c{bmie{\}}), +static library (\c{bmia{\}}), or shared library (\c{bmis{\}}). + +The \c{bmi{\}} target type is a group with the \c{bmie{\}}, and/or +\c{bmia{\}}, and/or \c{bmis{\}} members. A rule that encounters an \c{bmi{\}} +prerequisite picks a member appropriate for the target being built. + +The \c{bmi*{\}} file extensions are normally automatically assigned by the +matching rules based on the target platform. + + +\h2#module-bin-target-types-hbmi|\c{hbmi{\}}, \c{hbmie{\}}, \c{hbmia{\}}, +\c{hbmis{\}}| + +The \c{hbmi*{\}} target types represent binary module interfaces (BMI) for +C++20 header units appropriate for linking an executable (\c{hbmie{\}}), +static library (\c{hbmia{\}}), or shared library (\c{hbmis{\}}). + +The \c{hbmi{\}} target type is a group with the \c{hbmie{\}}, and/or +\c{hbmia{\}}, and/or \c{hbmis{\}} members. A rule that encounters an +\c{hbmi{\}} prerequisite picks a member appropriate for the target being +built. + +The \c{hbmi*{\}} file extensions are normally automatically assigned by the +matching rules based on the target platform. + + +\h2#module-bin-target-types-def|\c{def{\}}| + +The \c{def{\}} target type represents Windows module definition files and has +the fixed default extension \c{.def}. + \h1#module-cc|\c{cc} Module| @@ -6895,6 +7367,54 @@ $ b config.cxx=\"g++ -m32\" $ b config.cxx=\"clang++ -stdlib=libc++\" \ +\h#cc-target-types|C-Common Target Types| + +The following listing shows the hierarchy of the target types defined by the +\c{cc} module while the following sections describe each target type in detail +(\c{file{\}} is a standard target type defined by the \c{build2} core; see +\l{#targets-types Target Types} for details). Every \c{cc}-based module (such +as \c{c} and \c{cxx}) will have these common target types defined in addition +to the language-specific ones. + +\ +.--file--. +| | +h pc + | + pca + pcs +\ + +\N|While the \c{h{\}} target type represents a C header file, there is hardly +a C-family compilation without a C header inclusion. As a result, this target +types is defined by all \c{cc}-based modules.| + +For the description of the \c{h{\}} target type refer to \l{#c-target-types-c +\c{c{\}}, \c{h{\}}} in the C module documentation. + +\h2#cc-target-types-pc|\c{pc{\}}, \c{pca{\}}, \c{pcs{\}}| + +The \c{pc*{\}} target types represent \c{pkg-config} files. The \c{pc{\}} +target type represents the common file and has the fixed default extension +\c{.pc}. The \c{pca{\}} and \c{pcs{\}} target types represent the static and +shared files and have the fixed default extensions \c{.static.pc} and +\c{.shared.pc}, respectively. + +\N|It is often required to use different options for consuming static and +shared libraries. While there is the \c{Libs.private} and \c{Cflags.private} +mechanism in \c{pkg-config}, its semantics is to append options to \c{Libs} +and \c{Cflags} rather than to provide alternative options. And often the +required semantics is to provide different options for static and shared +libraries, such as to provide the macro which indicates whether linking static +or shared in order to setup symbol exporting. + +As a result, in \c{build2} we produce separate \c{.pc} files for static and +shared libraries in addition to the \"best effort\" common \c{.pc} file for +compatibility with other build systems. Similarly, when consuming a library +we first look for the \c{.static.pc} and \c{.shared.pc} files falling back +to the common \c{.pc} if they are not available.| + + \h#cc-internal-scope|Compilation Internal Scope| \N|While this section uses the \c{cxx} module and C++ compilation as an @@ -7316,6 +7836,34 @@ config.c.internal.scope c.internal.scope \ +\h#c-target-types|C Target Types| + +The following listing shows the hierarchy of the target types defined by the +\c{c} module while the following sections describe each target type in detail +(\c{file{\}} is a standard target type defined by the \c{build2} core; see +\l{#targets-types Target Types} for details). See also \l{#cc-target-types +C-Common Target Types} for target types defined by all the \c{cc}-based +modules. + +\ +.--file--. +| | | +c m S +h +\ + +The \c{m{\}} target type represents an Objective-C source file, see \l{c-objc +Objective-C Compilation} for details. + +The \c{S{\}} target type represents an Assembler with C Preprocessor file, see +\l{c-as-cpp Assembler with C Preprocessor Compilation} for details. + +\h2#c-target-types-c|\c{c{\}}, \c{h{\}}| + +The \c{c{\}} and \c{h{\}} target types represent C source and header files. +They have the default extensions \c{.c} and \c{.h}, respectively, which can +be customized with the \c{extension} variable. + \h#c-objc|Objective-C Compilation| @@ -7497,6 +8045,45 @@ config.cxx.translate_include \ +\h#cxx-target-types|C++ Target Types| + +The following listing shows the hierarchy of the target types defined by the +\c{cxx} module while the following sections describe each target type in +detail (\c{file{\}} is a standard target type defined by the \c{build2} core; +see \l{#targets-types Target Types} for details). See also \l{#cc-target-types +C-Common Target Types} for target types defined by all the \c{cc}-based +modules. + +\ + .--file--. + | | +cxx mm +hxx +ixx +txx +mxx +\ + +The \c{mm{\}} target type represents an Objective-C++ source file, see +\l{cxx-objcxx Objective-C++ Compilation} for details. + +\h2#cxx-target-types-cxx|\c{cxx{\}}, \c{hxx{\}}, \c{ixx{\}}, \c{txx{\}}, +\c{mxx{\}}| + +The \c{cxx{\}}, \c{hxx{\}}, \c{ixx{\}}, \c{txx{\}}, and \c{mxx{\}} target +types represent C++ source, header, inline, template, and module interface +files. They have the default extensions \c{.cxx}, \c{.hxx}, \c{.ixx}, +\c{.txx}, and \c{.mxx}, respectively, which can be customized with the +\c{extension} variable. For example (normally done in \c{root.build}): + +\ +using cxx + +cxx{*}: extension = cpp +hxx{*}: extension = hpp +mxx{*}: extension = cppm +\ + \h#cxx-modules|C++ Modules Support| This section describes the build system support for C++ modules. diff --git a/libbuild2/bin/init.cxx b/libbuild2/bin/init.cxx index 05a9c60..27e0b77 100644 --- a/libbuild2/bin/init.cxx +++ b/libbuild2/bin/init.cxx @@ -466,6 +466,9 @@ namespace build2 if (first) { + // NOTE: remember to update the documentation if changing anything + // here! + // rs.insert_target_type (); rs.insert_target_type (); rs.insert_target_type (); -- cgit v1.1