From 5545b9e9627029e1e16c945f19c6d90a1dd51831 Mon Sep 17 00:00:00 2001 From: Boris Kolpackov Date: Fri, 6 Jan 2017 14:38:12 +0200 Subject: Update testscript manual --- doc/testscript.cli | 485 ++++++++++++++++++++++++++--------------------------- 1 file changed, 240 insertions(+), 245 deletions(-) (limited to 'doc/testscript.cli') diff --git a/doc/testscript.cli b/doc/testscript.cli index 1d760dd..5c2b962 100644 --- a/doc/testscript.cli +++ b/doc/testscript.cli @@ -1063,7 +1063,7 @@ while potentially spanning several physical lines. In this case they represent \i{logical lines}, for example, a command line and its here-document fragments. -\h#grammar-all|Testscript Grammar| +\h#grammar-all|Grammar| The complete grammar of the Testscript language is presented next with the following sections discussing the semantics of each production rule. @@ -1184,23 +1184,23 @@ stderr: '2'(out-redirect) in-redirect: '<-'|\ '<+'|\ - '<'{':'?} |\ - '<<'{':'?} |\ + '<'{':'?'/'?} |\ + '<<'{':'?'/'?} |\ '<<<' out-redirect: '>-'|\ '>+'|\ '>&' ('1'|'2')|\ - '>'{':'?'~'?} |\ - '>>'{':'?'~'?} |\ + '>'{':'?'/'?}'~'? |\ + '>>'{':'?'/'?}'~'? |\ '>>>'{'&'?} -cleanup: ('&'|'&!'|'&?') (|) - here-document: * +cleanup: ('&'|'&?'|'&!') (|) + description: +(':' ) \ @@ -1626,13 +1626,14 @@ $* 2 >- $* a1>- \ + \h#grammar-in-redirect|Input Redirect| \ in-redirect: '<-'|\ '<+'|\ - '<'{':'?} |\ - '<<'{':'?} |\ + '<'{':'?'/'?} |\ + '<<'{':'?'/'?} |\ '<<<' \ @@ -1640,12 +1641,23 @@ The \c{stdin} data can come from a pipe, here-string (\c{<}), here-document (\c{<<}), a file (\c{<<<}), or \c{/dev/null}-equivalent (\c{<-}). Specifying both a pipe and a redirect is an error. If no pipe or \c{stdin} redirect is specified and the test tries to read from \c{stdin}, it is considered to have -failed. However, whether this is detected and diagnosed is +failed (unexpected input). However, whether this is detected and diagnosed is implementation-defined. To allow reading from the default \c{stdin} (for -instance if the test is really an example), the \c{<+} redirect is used. +instance, if the test is really an example), the \c{<+} redirect is used. + +Here-string and here-document redirects may specify the following modifiers. +The \c{:} modifier is used to suppress the otherwise automatically-added +terminating newline. + +The \c{/} modifier causes all the forward slashes in the here-string or +here-document to be translated to the test target platform's directory +separator. + +A here-document redirect must be specified \i{literally} on the command +line. Specifically, it must not be the result of an expansion (which rarely +makes sense anyway since the following here-document fragment itself cannot be +the result of an expansion either). -The \c{:} here-string and here-document redirect modifier is used to suppress -the otherwise automatically-added terminating newline. \h#grammar-in-output|Output Redirect| @@ -1653,252 +1665,43 @@ the otherwise automatically-added terminating newline. out-redirect: '>-'|\ '>+'|\ '>&' ('1'|'2')|\ - '>'{':'?'~'?} |\ - '>>'{':'?'~'?} |\ + '>'{':'?'/'?}'~'? |\ + '>>'{':'?'/'?}'~'? |\ '>>>'{'&'?} \ -======================================================================= - -The \c{stdout} and \c{stderr} stream data can go to a pipe (\c{stdout} only), -file (append if \c{>>>&}), or \c{/dev/null} (\c{>!}). It can also be -compared to a string or the here-document fragment. For \c{stdout} specifying -both pipe and redirect is an error. If no explicit \c{stderr} redirect is -specified and the test is expected to fail (non-zero exit status), then an -implicit \c{2>!} redirect is assumed. - -If no \c{stdout} or \c{stderr} redirect is specified and the test tries to -write any data to either stream, it is considered to have failed. If you need -to allow writing to the default \c{stdout} or \c{stderr}, specify \c{>?} and -\c{2>?}, respectively. - -We can also merge \c{stderr} to \c{stdout} (\c{2>&1}) or vice versa -(\c{1>&2}). - -If a command creates extra files or directories then we can register them for -automatic cleanup at the end of the test. Files mentioned in redirects are -registered automatically. - -Note that unlike shell no whitespaces around \c{<} and \c{>} redirects -or after the \c{&} cleanups are allowed. - -A here-document redirect must be specified \i{literally} on test command -line. Specifically, it must not be the result of a variable expansion or -context evaluation, which rarely makes sense anyway since the following -here-document fragment itself cannot be the result of the -expansion/evaluation either; in a sense they both are part of the syntax. - -This requirement is imposed in order to be able to skip test lines and their -associated here-document fragments in the \c{if-else} directives without -performing any expansions/evaluations (which may not be valid). - -The skipping procedure for a line that is either a variable assignment or a -test command is as follows: The line is lexed until the newline or EOF which -checking each token either for one of the variable assignment operators or -here-document redirects. If both kinds are present then this is an ambiguity -error which can be resolved by quoting either of the token, depending on the -desired semantics (variable assignment or test command). Otherwise, all the -here-document redirects are noted and the corresponding number of here-document -fragments is skipped (which \c{here-end} match/order validation). - -Note also that this procedure is applied even in case of \c{if-else} with -\c{directive-block} since the block end (\c{.\}}) may appears literally in -one of the here-document fragments. - -======================================================================= - -In merge redirects the left-hand-side descriptor (implied or explicit) must -not be the same as the right-hand-side. Having both merge redirects at the -same time is illegal. - -Here-line is like double-quoted string but recognizes newlines. - -It is an error to specify both leading and trailing descriptions. - - -\h#grammar-line|Line| - -\ -script-line: - directive-line | \ - variable-line | \ - test-line | setup-line | teardown-line -\ - -A testscript line is either a directive, a variable assignment, a -setup/teardown command, or a test command. - -To distinguish between the variable assignment and test command line the -parsing and expansion is performed in the \i{chunking} mode, that is, the -parser parses a minimum amount of semantically complete input and stops. - -If parsing the first chunk of the input resulted in a single simple name and -the following lexer token is one of \c{=}, \c{+=}, or \c{=+}, then this line -is treated as a variable assignment. Otherwise, it is a test command line. - -Similar to the Buildfile language, this semantics supports indirect/computed -variable names, for example: - -\ -foo = bar -$bar = baz -\ - -\h#grammar-description|Description| - -\ -description-line: ': ' - (': ')* -\ - -Description lines start with a colon (\c{:}) and are used to document tests -(either single-line or compound) as well as test groups. In a sense, they are -formalized comments. - -By convention the description has the following format with all three -components being optional. - -\ -: -: -: -:
-\ - -If the first line in the description does not contain any whitespaces, then it -is assumed to be the test or test group id. If the next line is followed by a -blank line, then it is assume to be the test or test group summary. After the -blank line come optional details which are free-form. - -If an id is not specified then it is automatically derived from the test or -test group location. If the test or test group is contained directly in the -top-level testscript file, then just its start line number is used as an id. -Otherwise, if the test or test group reside in an included file, then the -start line number (inside the included file) is prefixed with the line number -of the \c{.include} directive followed by the included file name (without the -extension) in the form \c{--}. This process is repeated -recursively for nested inclusion. - -The start line for a block (either test or group) is the line containing -opening brace (\c{{}) and for a simple test \- the test line itself. - -\h#grammar-directives|Directives| - -\ -directive-line: - include - if-else -\ - -All directive lines start with a leading dot (\c{.}). To specify a -non-directive line that starts with a dot you can either escape or quote it, -for example: - -\ -\.include -'.include' -\ - -\h2#grammar-directives-include|\c{.include}| - -\ -include: '.include' ( )+ -\ - -The \c{include} directive includes one or more testscript files into -another. If the specified path is not absolute, then it is interpreted as -being relative to the including file. The semantics of inclusion is \i{as if} -the contents of the included file appeared directly in the including file -except for deriving test/group ids and displaying locations in diagnostics. - -The reminder of the line after the \c{'.include'} word is expanded as a -Buildfile variable value. - - -\h2#grammar-directives-if-else|\c{.if} \c{.else}| - -\ -if-else: ('.if' | '.if!') - script - elif* - else? - '.end' - -elif: ('.elif' | '.elif!') - script - -else: '.else' - script -\ - -The \c{if-else} directives allow for conditional exclusion of testscript -fragments. The body of the \c{if-else} directive can be either a single -(logical) line, a single block, or multiple lines/blocks. For example: - -\ -.if ($foo == FOO) - bar = BAR - -.if ($cxx.target.class != windows) - $* foo - -.if ($cxx.target.class != windows) - { - $* foo - $* bar - } - -.if ($foo == FOO) -.{ - $* foo - - bar = BAR - baz = BAZ - - { - $* $bar - $* $baz - } -.} -\ - -Note that \c{if-else} operates on logical lines/blocks, for example: +The \c{stdout} and \c{stderr} data can go to a pipe (\c{stdout} only), file +(\c{>>>&} or \c{>>>&} to append), or \c{/dev/null}-equivalent (\c{>-}). It can +also be compared to here-string (\c{>}) or here-document (\c{>>}). For +\c{stdout} specifying both a pipe and a redirect is an error. A test that ties +to write to un-redirected stream (either \c{stdout} or \c{stderr}) it is +considered to have failed (unexpected output). -\ -.if ($foo == FOO) - : foo-bar - : Test foo bar combination - $* foo bar >>EOO - foo - bar - EOO - - -.if ($foo == FOO) - : foo-bar - : Test foo bar combination - : foo-bar - { - $* foo - $* bar - } -\ +To allow writing to the default \c{stdout} or \c{stderr} (for instance, if the +test is really an example), the \c{>+} redirect is used. -The reminder of the line after the \c{'.if'} and \c{'.elif'} words is expanded -as a Buildfile variable value and should evaluate to either \c{'true'} or -\c{'false'} text literals. +It is also possible to merge \c{stderr} to \c{stdout} or vice versa with a +merge redirect (\c{>&}). In this case the left-hand-side descriptor (implied +or explicit) must not be the same as the right-hand-side. Having both merge +redirects at the same time is illegal. +The \c{:/} redirect modifiers have the same semantics as in the input +redirects. The \c{~} modifier is used to indicate that the following +here-string/here-document is a regular expression (discussed below) rather +than a literal. Note that if present, it must be specified last. +Similar to the input redirects, an output here-document redirect must be +specified literally on the command line. \h#grammar-here-document|Here-Document| \ here-document: - * + * \ -The here-document fragments can be used to supply data to \c{stdin} or to +A here-document fragments can be used to supply data to \c{stdin} or to compare output to the expected result for \c{stdout} and \c{stderr}. Note that the order of here-document fragments must match the order of redirects, for example: @@ -1956,7 +1759,8 @@ EOI The leading whitespace stripping does not apply to line continuations. -\h#here-regex|Output Regex| + +\h#grammar-regex|Output Regex| The expected result in output here-strings and here-documents can be specified as a regular expression instead of plain text. To signal the use of regular @@ -2050,6 +1854,197 @@ trailing empty line-char. As a result, unless the \c{:} (no newline) redirect modifier is used, an empty line-char is implicitly added to line-regex. +\h#grammar-cleanup|Cleanup| + +\ +cleanup: ('&'|'&?'|'&!') (|) +\ + +If a command creates extra files or directories then they can be register for +automatic cleanup at the end of the scope (test or group). Files mentioned in +redirects are registered automatically. Additionally, certain builtints (for +example \c{touch} and \c{mkdir}) also register their output files/directories +automatically (as described in each builtin's documentation). + +If the path ends with a directory separator (slash), then it is assumed to be +a directory. Otherwise \- a file. A directory about to be removed must be +empty (no unexpected output). + +The \c{&} syntax registers a normal or \i{always} cleanup: the test fails if +the file/directory does not exist. The \c{&?} syntax is a \i{maybe} cleanup: +the file/directory is removed if it exists. Finally, \c{&!} is a \i{never} +cleanup: it disables a previously registered cleanup for this file/directory +(primarily used to disable automatic cleanups registered by builtins). + +The last component in the path may contain a wildcard with the following +semantics: + +\ +dir/* - all immediate files +dir/*/ - all immediate sub-directories (which must be empty) +dir/** - all files recursively +dir/**/ - all sub-directories recursively (which must be empty) +dir/*** - all files and sub-directories recursively and dir/ +\ + +Registering a cleanup outside testscript working directory is an error +(@@ is that correct). + + +\h#grammar-description|Description| + +\ +description: + +(':' ) +\ + +Description lines start with a colon (\c{:}) and are used to document tests +and test groups. In a sense they are formalized comments. + +A description can be \i{leading}, that is, specified before the test or +group. For tests it can also be \i{trailing} \- specified as a single line +after the (last) command of the test. It is an error to specify both leading +and trailing descriptions. + +By convention the leading description has the following format with all three +components being optional. + +\ +: +: +: +:
+\ + +If the first line in the description does not contain any whitespaces, then it +is assumed to be the test or test group id. If the next line is followed by a +blank line, then it is assume to be the test or test group summary. After the +blank line come optional details which are free-form. + +The trailing description can only be used to specify the id or summary (but +not both). + +If an id is not specified then it is automatically derived from the test or +test group location. If the test or test group is contained directly in the +top-level testscript file, then just its start line number is used as an id. +Otherwise, if the test or test group reside in an included file, then the +start line number (inside the included file) is prefixed with the line number +of the \c{include} directive followed by the included file name (without the +extension) in the form \c{--}. This process is repeated +recursively in case of nested inclusion. + +The start line for a scope (either test or group) is the line containing its +opening brace (\c{{}) and for a test \- the first test line. + + +\h1#builtins|Builtins| + +The Testscript language provides a portable subset of POSIX utilities. Each +utility normally implements the commonly used subset of the corresponding +POSIX specification, though there are deviations (e.g., in option handling) +and extensions, as described in this chapter. Note also the builtins are +implemented in-process with some of the simple ones (e.g., \c{true/false}, +\c{mkdir}, etc) are being just function calls. + + +\h#builtins-cat|\c{cat}| + +\ +cat ... +\ + +Read files in order and write their contents to \c{stdout}. Read from +\c{stdin} if no file is specified or \c{-} is specified as a file name. + + +\h#builtins-echo|\c{echo}| + +\ +echo ... +\ + +Write strings to \c{stdout} separating them with a single space followed +by a newline. + +\h#builtins-false|\c{false}| + +\ +false +\ + +Do nothing and terminate normally with 1 exit code indicating failure. + +\h#builtins-mkdir|\c{mkdir}| + +\ +mkdir [-p] ... +\ + +Create directories. Unless the \c{-p} option is specified, all the leading +directories must exist and the directory itself must not exist. + +\dl| + +\li|\n\c{-p} + + Create missing leading directories and ignore directories that already + exist.|| + +Created directories (including the leading ones) that are inside the script +working directory are automatically registered for cleanup. + + +\h#builtins-rm|\c{rm}| + +\ +rm [-r] [-f] ... +\ + +Remove filesystem entries. To remove a directory (even empty) the \c{-r} +option must be specified. + +The path must not be the test working directory or its parent directory. It +also must not be outside the script working directory unless the \c{-f} option +is specified. + +\dl| + +\li|\n\c{-r} + + Remove directories and their contents recursively.| + +\li|\n\c{-f} + + Do not fail if path does not exist or no path is specified.|| + +Note that the implementation deviates from POSIX in a number of ways. It never +interacts with the user and fails immediately if unable to act on an +argument. It does not check for dot containment in the path nor considers +filesystem permissions. In essence, it simply tries to remove the filesystem +entry. I also always fails if an empty path is specified. + + +\h#builtins-touch|\c{touch}| + +\ +touch ... +\ + +Change file access and modification times to the current time. Create files +that do not exist. Fail if a file system entry other than the file exists for +the specified name. + +Created files that are inside the script working directory are automatically +registered for cleanup. + +\h#builtins-true|\c{true}| + +\ +true +\ + +Do nothing and terminate normally with 0 exit code indicating success. + \h1#style|Style Guide| This section describes the Testscript style that is used in the \c{build2} -- cgit v1.1