From 2835794b28d482b1e391dc85f79dfa91f9e63d3e Mon Sep 17 00:00:00 2001 From: Karen Arutyunov Date: Thu, 17 Feb 2022 16:33:27 +0300 Subject: Move parse_cmdline() to libbuild2 --- libbuild2/b.cli | 751 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 751 insertions(+) create mode 100644 libbuild2/b.cli (limited to 'libbuild2/b.cli') diff --git a/libbuild2/b.cli b/libbuild2/b.cli new file mode 100644 index 0000000..112db2b --- /dev/null +++ b/libbuild2/b.cli @@ -0,0 +1,751 @@ +// file : build2/b.cli +// license : MIT; see accompanying LICENSE file + +include ; +include ; + +"\section=1" +"\name=b" +"\summary=build system driver" + +namespace build2 +{ + { + " + + ", + + "\h|SYNOPSIS| + + \c{\b{b --help}\n + \b{b --version}\n + \b{b} [] [] []} + + \c{ = \b{(}\b{(}...[\b{,}]\b{)}...\b{)}...} + + \h|DESCRIPTION| + + The \cb{build2} build system driver executes a set of meta-operations on + operations on targets according to the build specification, or + \i{buildspec} for short. This process can be controlled by specifying + driver and build system . + + Note that , , and fragments can be + specified in any order. To avoid treating an argument that starts with + \cb{'-'} as an option, add the \cb{'--'} separator. To avoid treating an + argument that contains \cb{'='} as a variable, add the second \cb{'--'} + separator." + } + + // For usage it's nice to see the list of options on the first page. So + // let's not put this "extended" description into usage. + // + { + " ", + "", + + "All components in the buildspec can be omitted. If is + omitted, then it defaults to \cb{perform}. If is omitted, + then it defaults to the default operation for this meta-operation. For + \cb{perform} it is \cb{update}. Finally, if is omitted, then it + defaults to the current working directory. A meta-operation on operation + is called an \i{action}. Some operations and meta-operations may take + additional . For example: + + \ + $ b # perform(update(./)) + $ b foo/ # perform(update(foo/)) + $ b foo/ bar/ # perform(update(foo/ bar/)) + $ b update # perform(update(./)) + $ b 'clean(../)' # perform(clean(../)) + $ b perform # perform(update(./)) + $ b configure # configure(?(./)) + $ b 'configure(../)' # configure(?(../)) + $ b clean update # perform(clean(./) update(./)) + $ b configure update # configure(?(./)) perform(update(./)) + $ b 'create(conf/, cxx)' # create(?(conf/), cxx) + \ + + Notice the question mark used to show the (imaginary) default operation + for the \cb{configure} meta-operation. For \cb{configure} the default + operation is \"all operations\". That is, it will configure all the + operations for the specified target. + + You can also \"generate\" multiple operations for the same set of targets. + Compare: + + \ + $ b 'clean(foo/ bar/)' 'update(foo/ bar/)' + $ b '{clean update}(foo/ bar/)' + \ + + Some more useful buildspec examples: + + \ + $ b '{clean update}(...)' # rebuild + $ b '{clean update clean}(...)' # make sure builds + $ b '{clean test clean}(...)' # make sure passes tests + $ b '{clean disfigure}(...)' # similar to distclean + \ + + In POSIX shells parenthesis are special characters and must be quoted + when used in a buildspec. Besides being an inconvenience in itself, + quoting also inhibits path auto-completion. To help with this situation a + shortcut syntax is available for executing a single operation or + meta-operation, for example: + + \ + $ b clean: foo/ bar/ # clean(foo/ bar/) + $ b configure: src/@out/ # configure(src/@out/) + $ b create: conf/, cxx # create(conf/, cxx) + $ b configure: config.cxx=g++ src/ # configure(src/) config.cxx=g++ + \ + + To activate the shortcut syntax the first buildspec argument must start + with an operation or meta-operation name and end with a colon (\cb{:}). + To transform the shortcut syntax to the normal buildspec syntax the colon + is replaced with the opening parenthesis ('\cb{(}'), the rest of the + buildspec arguments are treated as is, and the final closing parenthesis + ('\cb{)}') is added. + + For each the driver expects to find \cb{buildfile} either in the + target's directory or, if the directory is part of the \cb{out} tree + (\cb{out_base}), in the corresponding \cb{src} directory (\cb{src_base}). + + For example, assuming \cb{foo/} is the source directory of a project: + + \ + $ b foo/ # out_base=src_base=foo/ + $ b foo-out/ # out_base=foo-out/ src_base=foo/ + $ b foo-out/exe{foo} # out_base=foo-out/ src_base=foo/ + \ + + An exception to this requirement is a directory target in which case, + provided the directory has subdirectories, an \i{implied} \cb{buildfile} + with the following content is assumed: + + \ + # Implied directory buildfile: build all subdirectories. + # + ./: */ + \ + + In the above example, we assumed that the build system driver was able to + determine the association between \cb{out_base} and \cb{src_base}. In + case \cb{src_base} and \cb{out_base} are not the same directory, this is + achieved in one of two ways: the \cb{config} module (which implements the + \cb{configure}, \cb{disfigure}, and \cb{create} meta-operations) saves + this association as part of the configuration process. If, however, the + association hasn't been saved, then we have to specify \cb{src_base} + explicitly using the following extended syntax: + + \c{/@} + + Continuing with the previous example: + + \ + $ b foo/@foo-out/exe{foo} # out_base=foo-out/ src_base=foo/ + \ + + Normally, you would need to specify \cb{src_base} explicitly only once, + during configuration. For example, a typical usage would be: + + \ + $ b configure: foo/@foo-out/ # src_base is saved + $ b foo-out/ # no need to specify src_base + $ b clean: foo-out/exe{foo} # no need to specify src_base + \ + + Besides in and out of source builds, \cb{build2} also supports + configuring a project's source directory as \i{forwarded} to an out of + source build. With such a forwarded configuration in place, if we run the + build system driver from the source directory, it will automatically + build in the output directory and \i{backlink} (using symlinks or another + suitable mechanism) certain \"interesting\" targets (executables, + documentation, etc) to the source directory for easy access. Continuing + with the previous example: + + \ + $ b configure: foo/@foo-out/,forward # foo/ forwarded to foo-out/ + $ cd foo/ + $ b # build in foo-out/ + $ ./foo # symlink to foo-out/foo + \ + + The ability to specify \cb{build2} variables as part of the command line + is normally used to pass configuration values, for example: + + \ + $ b config.cxx=clang++ config.cxx.coptions=-O3 + \ + + Similar to buildspec, POSIX shells often inhibit path auto-completion on + the right hand side of a variable assignment. To help with this situation + the assignment can be broken down into three separate command line + arguments, for example: + + \ + $ b config.import.libhello = ../libhello/ + \ + + The build system has the following built-in and pre-defined + meta-operations: + + \dl| + + \li|\cb{perform} + + Perform an operation.| + + \li|\cb{configure} + + Configure all operations supported by a project and save the result + in the project's \cb{build/config.build} file. Implemented by the + \cb{config} module. For example: + + \ + $ b configure \ + config.cxx=clang++ \ + config.cxx.coptions=-O3 \ + config.install.root=/usr/local \ + config.install.root.sudo=sudo + \ + + Use the \cb{forward} parameter to instead configure a source + directory as forwarded to an out of source build. For example: + + \ + $ b configure: src/@out/,forward + \ + + | + + \li|\cb{disfigure} + + Disfigure all operations supported by a project and remove the + project's \cb{build/config.build} file. Implemented by the + \cb{config} module. + + Use the \cb{forward} parameter to instead disfigure forwarding of a + source directory to an out of source build. For example: + + \ + $ b disfigure: src/,forward + \ + + | + + \li|\cb{create} + + Create and configure a \i{configuration} project. Implemented by the + \cb{config} module. + + Normally a \cb{build2} project is created manually by writing the + \cb{bootstrap.build} and \cb{config.build} files, adding source + files, and so on. However, a special kind of project, which we call + \i{configuration}, is often useful. Such a project doesn't have any + source files of its own. Instead, it serves as an amalgamation for + building other projects as part of it. Doing it this way has two + major benefits: sub-projects automatically resolve their imports + to other projects in the amalgamation and sub-projects inherits their + configuration from the amalgamation (which means if we want to change + something, we only need to do it in one place). + + As an example, let's assume we have two C++ projects: the + \cb{libhello} library in \cb{libhello/} and the \cb{hello} executable + that imports it in \cb{hello/}. And we want to build \cb{hello} with + \cb{clang++}. + + One way to do it would be to configure and build each project in its + own directory, for example: + + \ + $ b configure: libhello/@libhello-clang/ config.cxx=clang++ + $ b configure: hello/@hello-clang/ config.cxx=clang++ \ + config.import.libhello=libhello-clang/ + \ + + The two drawbacks, as mentioned above, are the need to explicitly + resolve the import and having to make changes in multiple places + should, for example, we want to switch from \cb{clang++} to \cb{g++}. + + We can, however, achieve the same end result but without any of the + drawbacks using the configuration project: + + \ + $ b create: clang/,cxx config.cxx=clang++ # Creates clang/. + $ b configure: libhello/@clang/libhello/ + $ b configure: hello/@clang/hello/ + \ + + The targets passed to the \cb{create} meta-operation must be + directories which should either not exist or be empty. For each + such directory \cb{create} first initializes a project as described + below and then configures it by executing the \cb{configure} + meta-operation. + + The first optional parameter to \cb{create} is the list of modules to + load in \cb{root.build}. By default, \cb{create} appends \cb{.config} + to the names of these modules so that only their configurations are + loaded. You can override this behavior by specifying the period + (\cb{.}) after the module name. You can also instruct \cb{create} to + use the optional module load by prefixing the module name with the + question mark (\cb{?}). + + The second optional parameter is the list of modules to load in + \cb{bootstrap.build}. If not specified, then the \cb{test}, + \cb{dist}, and \cb{install} modules are loaded by default. The + \cb{config} module is always loaded first. + + Besides creating project's \cb{bootstrap.build} and \cb{root.build}, + \cb{create} also writes the root \cb{buildfile} with the following + contents: + + \ + ./: {*/ -build/} + \ + + If used, this \cb{buildfile} will build all the sub-projects + currently present in the configuration.| + + \li|\cb{dist} + + Prepare a distribution containing all files necessary to perform all + operations in a project. Implemented by the \cb{dist} module.| + + \li|\cb{info} + + Print basic information (name, version, source and output + directories, etc) about one or more projects to \cb{STDOUT}, + separating multiple projects with a blank line. Each project is + identified by its root directory target. For example: + + \ + $ b info: libfoo/ libbar/ + \ + + || + + The build system has the following built-in and pre-defined operations: + + \dl| + + \li|\cb{update} + + Update a target.| + + \li|\cb{clean} + + Clean a target.| + + \li|\cb{test} + + Test a target. Performs \cb{update} as a pre-operation. Implemented by + the \cb{test} module.| + + \li|\cb{update-for-test} + + Update a target for testing. This operation is equivalent to the + \cb{update} pre-operation as executed by the \cb{test} operation and + can be used to only update what is necessary for testing. Implemented + by the \cb{test} module.| + + \li|\cb{install} + + Install a target. Performs \cb{update} as a pre-operation. Implemented + by the \cb{install} module.| + + + \li|\cb{uninstall} + + Uninstall a target. Performs \cb{update} as a pre-operation. + Implemented by the \cb{install} module.| + + \li|\cb{update-for-install} + + Update a target for installation. This operation is equivalent to the + \cb{update} pre-operation as executed by the \cb{install} operation + and can be used to only update what is necessary for + installation. Implemented by the \cb{install} module.|| + + Note that buildspec and command line variable values are treated as + \cb{buildfile} fragments and so can use quoting and escaping as well as + contain variable expansions and evaluation contexts. However, to be more + usable on various platforms, escaping in these two situations is limited + to the \i{effective sequences} of \cb{\\'}, \cb{\\\"}, \cb{\\\\}, + \cb{\\$}, and \cb{\\(} with all other sequences interpreted as is. + Together with double-quoting this is sufficient to represent any value. + For example: + + \ + $ b config.install.root=c:\projects\install + $ b \"config.install.root='c:\Program Files (x86)\test\'\" + $ b 'config.cxx.poptions=-DFOO_STR=\"foo\"' + \ + " + } + + class options + { + "\h#options|OPTIONS|" + + uint64_t --build2-metadata; // Leave undocumented/hidden. + + bool -v + { + "Print actual commands being executed. This options is equivalent to + \cb{--verbose 2}." + } + + bool -V + { + "Print all underlying commands being executed. This options is + equivalent to \cb{--verbose 3}." + } + + bool --quiet|-q + { + "Run quietly, only printing error messages in most contexts. In certain + contexts (for example, while updating build system modules) this + verbosity level may be ignored. Use \cb{--silent} to run quietly in all + contexts. This option is equivalent to \cb{--verbose 0}." + } + + bool --silent + { + "Run quietly, only printing error messages in all contexts." + } + + uint16_t --verbose = 1 + { + "", + "Set the diagnostics verbosity to between 0 and 6. Level 0 + disables any non-error messages (but see the difference between + \cb{--quiet} and \cb{--silent}) while level 6 produces lots of + information, with level 1 being the default. The following additional + types of diagnostics are produced at each level: + + \ol| + + \li|High-level information messages.| + + \li|Essential underlying commands being executed.| + + \li|All underlying commands being executed.| + + \li|Information that could be helpful to the user.| + + \li|Information that could be helpful to the developer.| + + \li|Even more detailed information.||" + } + + bool --stat + { + "Display build statistics." + } + + std::set --dump + { + "", + "Dump the build system state after the specified phase. Valid + values are \cb{load} (after loading \cb{buildfiles}) and \cb{match} + (after matching rules to targets). Repeat this option to dump the + state after multiple phases." + } + + bool --progress + { + "Display build progress. If printing to a terminal the progress is + displayed by default for low verbosity levels. Use \cb{--no-progress} + to suppress." + } + + bool --no-progress + { + "Don't display build progress." + } + + size_t --jobs|-j + { + "", + "Number of active jobs to perform in parallel. This includes both the + number of active threads inside the build system as well as the number + of external commands (compilers, linkers, etc) started but not yet + finished. If this option is not specified or specified with the \cb{0} + value, then the number of available hardware threads is used." + } + + size_t --max-jobs|-J + { + "", + "Maximum number of jobs (threads) to create. The default is 8x the + number of active jobs (\cb{--jobs|j}) on 32-bit architectures and 32x + on 64-bit. See the build system scheduler implementation for details." + } + + size_t --queue-depth|-Q = 4 + { + "", + "The queue depth as a multiplier over the number of active jobs. + Normally we want a deeper queue if the jobs take long (for example, + compilation) and shorter if they are quick (for example, simple tests). + The default is 4. See the build system scheduler implementation for + details." + } + + string --file-cache + { + "", + "File cache implementation to use for intermediate build results. Valid + values are \cb{noop} (no caching or compression) and \cb{sync-lz4} (no + caching with synchronous LZ4 on-disk compression). If this option is + not specified, then a suitable default implementation is used + (currently \cb{sync-lz4})." + } + + size_t --max-stack + { + "", + "The maximum stack size in KBytes to allow for newly created threads. + For \i{pthreads}-based systems the driver queries the stack size of + the main thread and uses the same size for creating additional threads. + This allows adjusting the stack size using familiar mechanisms, such + as \cb{ulimit}. Sometimes, however, the stack size of the main thread + is excessively large. As a result, the driver checks if it is greater + than a predefined limit (64MB on 64-bit systems and 32MB on 32-bit + ones) and caps it to a more sensible value (8MB) if that's the case. + This option allows you to override this check with the special zero + value indicating that the main thread stack size should be used as is." + } + + bool --serial-stop|-s + { + "Run serially and stop at the first error. This mode is useful to + investigate build failures that are caused by build system errors + rather than compilation errors. Note that if you don't want to keep + going but still want parallel execution, add \cb{--jobs|-j} (for + example \cb{-j\ 0} for default concurrency)." + } + + bool --dry-run|-n + { + "Print commands without actually executing them. Note that commands + that are required to create an accurate build state will still be + executed and the extracted auxiliary dependency information saved. In + other words, this is not the \i{\"don't touch the filesystem\"} mode + but rather \i{\"do minimum amount of work to show what needs to be + done\"}. Note also that only the \cb{perform} meta-operation supports + this mode." + } + + bool --match-only + { + "Match the rules but do not execute the operation. This mode is primarily + useful for profiling." + } + + bool --no-external-modules + { + "Don't load external modules during project bootstrap. Note that this + option can only be used with meta-operations that do not load the + project's \cb{buildfiles}, such as \cb{info}." + } + + bool --structured-result + { + "Write the result of execution in a structured form. In this mode, + instead of printing to \cb{STDERR} diagnostics messages about the + outcome of executing actions on targets, the driver writes to + \cb{STDOUT} a structured result description one line per the + buildspec action/target pair. Each line has the following format: + + \c{\i{state} \i{meta-operation} \i{operation} \i{target}} + + Where \ci{state} can be one of \cb{unchanged}, \cb{changed}, or + \cb{failed}. If the action is a pre or post operation, then the + outer operation is specified in parenthesis. For example: + + \ + unchanged perform update(test) /tmp/dir{hello/} + changed perform test /tmp/dir{hello/} + \ + + Note that only the \cb{perform} meta-operation supports the structured + result output. + " + } + + bool --mtime-check + { + "Perform file modification time sanity checks. These checks can be + helpful in diagnosing spurious rebuilds and are enabled by default + on Windows (which is known not to guarantee monotonically increasing + mtimes) and for the staged version of the build system on other + platforms. Use \cb{--no-mtime-check} to disable." + } + + bool --no-mtime-check + { + "Don't perform file modification time sanity checks. See + \cb{--mtime-check} for details." + } + + bool --no-column + { + "Don't print column numbers in diagnostics." + } + + bool --no-line + { + "Don't print line and column numbers in diagnostics." + } + + path --buildfile + { + "", + "The alternative file to read build information from. The default is + \cb{buildfile} or \cb{build2file}, depending on the project's build + file/directory naming scheme. If is '\cb{-}', then read from + \cb{STDIN}. Note that this option only affects the files read as part + of the buildspec processing. Specifically, it has no effect on the + \cb{source} and \cb{include} directives. As a result, this option is + primarily intended for testing rather than changing the build file + names in real projects." + } + + path --config-guess + { + "", + "The path to the \cb{config.guess(1)} script that should be used to + guess the host machine triplet. If this option is not specified, then + \cb{b} will fall back on to using the target it was built for as host." + } + + path --config-sub + { + "", + "The path to the \cb{config.sub(1)} script that should be used to + canonicalize machine triplets. If this option is not specified, then + \cb{b} will use its built-in canonicalization support which should + be sufficient for commonly-used platforms." + } + + string --pager // String to allow empty value. + { + "", + "The pager program to be used to show long text. Commonly used pager + programs are \cb{less} and \cb{more}. You can also specify additional + options that should be passed to the pager program with + \cb{--pager-option}. If an empty string is specified as the pager + program, then no pager will be used. If the pager program is not + explicitly specified, then \cb{b} will try to use \cb{less}. If it + is not available, then no pager will be used." + } + + strings --pager-option + { + "", + "Additional option to be passed to the pager program. See \cb{--pager} + for more information on the pager program. Repeat this option to + specify multiple pager options." + } + + // The following option is "fake" in that it is actually handled by + // argv_file_scanner. We have it here for documentation. + // + string --options-file + { + "", + "Read additional options from . Each option should appear on a + separate line optionally followed by space or equal sign (\cb{=}) and + an option value. Empty lines and lines starting with \cb{#} are + ignored. Option values can be enclosed in double (\cb{\"}) or single + (\cb{'}) quotes to preserve leading and trailing whitespaces as well as + to specify empty values. If the value itself contains trailing or + leading quotes, enclose it with an extra pair of quotes, for example + \cb{'\"x\"'}. Non-leading and non-trailing quotes are interpreted as + being part of the option value. + + The semantics of providing options in a file is equivalent to providing + the same set of options in the same order on the command line at the + point where the \cb{--options-file} option is specified except that + the shell escaping and quoting is not required. Repeat this option + to specify more than one options file." + } + + dir_path --default-options + { + "", + "The directory to load additional default options files from." + } + + bool --no-default-options + { + "Don't load default options files." + } + + bool --help {"Print usage information and exit."} + bool --version {"Print version and exit."} + }; + + " + \h|DEFAULT OPTIONS FILES| + + Instead of having a separate config file format for tool configuration, the + \cb{build2} toolchain uses \i{default options files} which contain the same + options as what can be specified on the command line. The default options + files are like options files that one can specify with \cb{--options-file} + except that they are loaded by default. + + The default options files for the build system driver are called + \cb{b.options} and are searched for in the \cb{.build2/} subdirectory of the + home directory and in the system directory (for example, \cb{/etc/build2/}) + if configured. Note that besides options these files can also contain global + variable overrides. + + Once the search is complete, the files are loaded in the reverse order, that + is, beginning from the system directory (if any), followed by the home + directory, and finishing off with the options specified on the command line. + In other words, the files are loaded from the more generic to the more + specific with the command line options having the ability to override any + values specified in the default options files. + + If a default options file contains \cb{--no-default-options}, then the + search is stopped at the directory containing this file and no outer files + are loaded. If this option is specified on the command line, then none of + the default options files are searched for or loaded. + + An additional directory containing default options files can be specified + with \cb{--default-options}. Its configuration files are loaded after the + home directory. + + The order in which default options files are loaded is traced at the + verbosity level 3 (\cb{-V} option) or higher. + + \h|EXIT STATUS| + + Non-zero exit status is returned in case of an error. + " + + // NOTE: remember to update --build2-metadata output if adding any relevant + // new environment variables. + // + " + \h|ENVIRONMENT| + + The \cb{HOME} environment variable is used to determine the user's home + directory. If it is not set, then \cb{getpwuid(3)} is used instead. This + value is used to shorten paths printed in diagnostics by replacing the home + directory with \cb{~/}. It is also made available to \cb{buildfile}'s as the + \cb{build.home} variable. + + The \cb{BUILD2_VAR_OVR} environment variable is used to propagate global + variable overrides to nested build system driver invocations. Its value is a + list of global variable assignments separated with newlines. + + The \cb{BUILD2_DEF_OPT} environment variable is used to suppress loading of + default options files in nested build system driver invocations. Its values + are \cb{false} or \cb{0} to suppress and \cb{true} or \cb{1} to load. + " +} -- cgit v1.1