From eeb155ebc35c5947234f731c333e2bd71ea88974 Mon Sep 17 00:00:00 2001 From: Boris Kolpackov Date: Wed, 28 Aug 2024 09:36:16 +0200 Subject: Add support for JSON compilation database generation and maintenance See the "Compilation Database" section in the "cc Module" chapter of the manual for details. --- libbuild2/cc/compile-rule.cxx | 65 ++- libbuild2/cc/compiledb.cxx | 1099 +++++++++++++++++++++++++++++++++++++++++ libbuild2/cc/compiledb.hxx | 226 +++++++++ libbuild2/cc/init.cxx | 519 ++++++++++++++++++- libbuild2/cc/module.cxx | 9 + libbuild2/cc/module.hxx | 34 +- libbuild2/cc/pkgconfig.cxx | 3 +- 7 files changed, 1926 insertions(+), 29 deletions(-) create mode 100644 libbuild2/cc/compiledb.cxx create mode 100644 libbuild2/cc/compiledb.hxx (limited to 'libbuild2/cc') diff --git a/libbuild2/cc/compile-rule.cxx b/libbuild2/cc/compile-rule.cxx index 99c3b90..29a26b5 100644 --- a/libbuild2/cc/compile-rule.cxx +++ b/libbuild2/cc/compile-rule.cxx @@ -25,6 +25,7 @@ #include // h #include #include +#include using std::exit; using std::strlen; @@ -1181,6 +1182,11 @@ namespace build2 fsdir_rule::perform_update_direct (a, *dir); } + // Use the subset of the depdb checks to detect changes to the + // compilation database entry. + // + bool compiledb_changed (false); + // Note: the leading '@' is reserved for the module map prefix (see // extract_modules()) and no other line must start with it. // @@ -1198,8 +1204,14 @@ namespace build2 // but only in what it targets, then the checksum will still change. // if (dd.expect (cast (rs[x_checksum])) != nullptr) + { l4 ([&]{trace << "compiler mismatch forcing update of " << t;}); + // The checksum includes the absolute compiler path. + // + compiledb_changed = true; + } + // Then the compiler environment checksum. // if (dd.expect (env_checksum) != nullptr) @@ -1263,7 +1275,17 @@ namespace build2 append_sys_hdr_options (cs); // Extra system header dirs (last). if (dd.expect (cs.string ()) != nullptr) + { l4 ([&]{trace << "options mismatch forcing update of " << t;}); + + // Note that this doesn't include any of the "plumbing" options + // like -x, -c, -o, etc. In the unlikely event that there are + // changes in this area that also affect the semantics of the + // compilation database (options reordering doesn't, for example), + // then we can resort to incrementing the rule version. + // + compiledb_changed = true; + } } // Finally the source file. @@ -1273,7 +1295,10 @@ namespace build2 assert (!p.empty ()); // Sanity check. if (dd.expect (p) != nullptr) + { l4 ([&]{trace << "source file mismatch forcing update of " << t;}); + compiledb_changed = true; + } } // If any of the above checks resulted in a mismatch (different @@ -1296,6 +1321,14 @@ namespace build2 u = dd.mtime > mt; } + // Confirm the entry in the compilation database, if any. + // + if (compiledb::match (bs, t, tp, src, compiledb_changed) && !u) + { + l4 ([&]{trace << "compilation database forcing update of " << t;}); + u = true; + } + // If updating for any of the above reasons, treat it as if doesn't // exist. // @@ -7354,8 +7387,11 @@ namespace build2 // apply()). For named modules there may be no obj*{} if this is a // sidebuild (obj*{} is already in the library binary). // - path relm; + const path* abso (nullptr); + const path* absm (nullptr); path relo; + path relm; + switch (ut) { case unit_type::module_header: @@ -7365,12 +7401,18 @@ namespace build2 case unit_type::module_impl_part: { if (const file* o = find_adhoc_member (t, tts.obj)) - relo = relative (o->path ()); + { + abso = &o->path (); + relo = relative (*abso); + } break; } default: - relo = relative (tp); + { + abso = &tp; + relo = relative (tp); + } } // Build the command line. @@ -7400,6 +7442,9 @@ namespace build2 small_vector header_args; // Header unit options storage. small_vector module_args; // Module options storage. + // NOTE: see a note in apply() on the compilation database implications + // if changing anything below. + // switch (cclass) { case compiler_class::msvc: @@ -7534,6 +7579,7 @@ namespace build2 { assert (ut != unit_type::module_header); // @@ MODHDR + absm = &tp; relm = relative (tp); args.push_back ("/ifcOutput"); @@ -7747,6 +7793,9 @@ namespace build2 // Output module file is specified in the mapping file, the // same as input. // + // We set neither relm nor absm since they are not on the + // command line. + // if (ut == unit_type::module_header) // No obj, -c implied. break; @@ -7775,6 +7824,7 @@ namespace build2 { assert (ut != unit_type::module_header); // @@ MODHDR + absm = &tp; relm = relative (tp); // Without this option Clang's .pcm will reference source @@ -7886,6 +7936,15 @@ namespace build2 else if (verb == 2) print_process (args); + // Insert or update the entry in the compilation database, if any. + // + compiledb::execute ( + bs, + t, tp, s, *sp, + cpath, args, + relo, abso != nullptr ? *abso : empty_path, + relm, absm != nullptr ? *absm : empty_path); + // If we have the (partially) preprocessed output, switch to that. // // But we remember the original source/position to restore later. diff --git a/libbuild2/cc/compiledb.cxx b/libbuild2/cc/compiledb.cxx new file mode 100644 index 0000000..7414eb2 --- /dev/null +++ b/libbuild2/cc/compiledb.cxx @@ -0,0 +1,1099 @@ +// file : libbuild2/cc/compiledb.cxx -*- C++ -*- +// license : MIT; see accompanying LICENSE file + +#include + +#include // strlen() +#include // cout + +#ifndef BUILD2_BOOTSTRAP +# include +#endif + +#include +#include + +#include + +#include +#include + +using namespace std; + +namespace build2 +{ + namespace cc + { + compiledb_set compiledbs; + + // compiledb + // + compiledb:: + ~compiledb () + { + } + + // Return true if this entry should be written to the database with the + // specified name. + // + static bool + filter (const scope& rs, + const core_module& m, + const string& name, + const file& ot, const file& it) + { + tracer trace ("cc::compiledb_filter"); + + bool r (true); + const char* w (nullptr); // Why r is false. + + // First check if writing to this database is enabled. + // + // No filter means not enabled. + // + if (m.cdb_filter_ == nullptr) + { + r = false; + w = "no database name filter"; + } + else + { + // Iterate in reverse (so that later values override earlier) and take + // the first name match. + // + r = false; + for (const pair, bool>& p: + reverse_iterate (*m.cdb_filter_)) + { + if (!p.first || *p.first == name) + { + r = p.second; + break; + } + } + + if (!r) + w = "no match in database name filter"; + } + + // Verify the name is known in this amalgamation. Note that without + // this check we may end up writing to unrelated databases in other + // amalgamations (think linked configurations). + // + if (r) + { + r = false; + for (const core_module* pm (&m); + pm != nullptr; + pm = pm->outer_module_) + { + const strings& ns (pm->cdb_names_); + + if (find (ns.begin (), ns.end (), name) != ns.end ()) + { + r = true; + break; + } + } + + if (!r) + w = "database name unknown in amalgamation"; + } + + // Filter based on the output target. + // + // If there is no filter specified, then accept all targets. + // + if (r && m.cdb_filter_output_ != nullptr) + { + // If the filter is empty, then there is no match. + // + if (m.cdb_filter_output_->empty ()) + { + r = false; + w = "empty output target type filter"; + } + else + { + const target_type& ott (ot.type ()); + + // Iterate in reverse (so that later values override earlier) and + // take the first name match. + // + r = false; + for (const pair, string>& p: + reverse_iterate (*m.cdb_filter_output_)) + { + if (p.first && *p.first != name) + continue; + + using namespace bin; + + const string& n (p.second); + + if (ott.name == n || n == "target") + { + r = true; + } + // + // Handle obj/bmi/hbmi{} groups ad hoc. + // + else if (n == "obj") + { + r = ott.is_a () || ott.is_a () || ott.is_a (); + } + else if (n == "bmi") + { + r = ott.is_a () || ott.is_a () || ott.is_a (); + } + else if (n == "hbmi") + { + r = ott.is_a () || ott.is_a () || ott.is_a (); + } + else + { + // Handle the commonly-used, well-known targets directly (see + // note in core_config_init() for why we cannot pre-lookup + // them). + // + const target_type* tt ( + n == "obje" ? &obje::static_type : + n == "objs" ? &objs::static_type : + n == "obja" ? &obja::static_type : + n == "bmie" ? &bmie::static_type : + n == "bmis" ? &bmis::static_type : + n == "bmia" ? &bmia::static_type : + n == "hbmie" ? &hbmie::static_type : + n == "hbmis" ? &hbmis::static_type : + n == "hbmia" ? &hbmia::static_type : + rs.find_target_type (n)); + + if (tt == nullptr) + fail << "unknown target type '" << n << "' in " + << "config.cc.compiledb.filter.output value"; + + r = ott.is_a (*tt); + } + + if (r) + break; + } + + if (!r) + w = "no match in output target type filter"; + } + } + + // Filter based on the input target. + // + // If there is no filter specified, then accept all targets. + // + if (r && m.cdb_filter_input_ != nullptr) + { + // If the filter is empty, then there is no match. + // + if (m.cdb_filter_input_->empty ()) + { + r = false; + w = "empty input target type filter"; + } + else + { + const target_type& itt (it.type ()); + + // Iterate in reverse (so that later values override earlier) and + // take the first name match. + // + r = false; + for (const pair, string>& p: + reverse_iterate (*m.cdb_filter_input_)) + { + if (p.first && *p.first != name) + continue; + + const string& n (p.second); + + if (itt.name == n || n == "target") + r = true; + else + { + // The same optimization as above. Note: cxx{}, etc., are in the + // cxx module so we have to look them up. + // + const target_type* tt ( + n == "c" ? &c::static_type : + n == "m" ? &m::static_type : + n == "S" ? &m::static_type : + rs.find_target_type (n)); + + if (tt == nullptr) + fail << "unknown target type '" << n << "' in " + << "config.cc.compiledb.filter.input value"; + + r = itt.is_a (*tt); + } + + if (r) + break; + } + + if (!r) + w = "no match in input target type filter"; + } + } + + l6 ([&] + { + if (r) + trace << "keep " << ot << " in " << name; + else + trace << "omit " << ot << " from " << name << ": " << w; + }); + + return r; + } + + bool compiledb:: + match (const scope& bs, + const file& ot, const path_type& op, + const file& it, + bool changed) + { + if (compiledbs.empty ()) + return false; + + const scope& rs (*bs.root_scope ()); + const auto* m (rs.find_module (core_module::name)); + + assert (m != nullptr); + + bool u (false); + + for (const unique_ptr& db: compiledbs) + { + if (filter (rs, *m, db->name, ot, it)) + u = db->match (ot, op, changed) || u; + } + + return u; + } + + void compiledb:: + execute (const scope& bs, + const file& ot, const path_type& op, + const file& it, const path_type& ip, + const process_path& cpath, const cstrings& args, + const path_type& relo, const path_type& abso, + const path_type& relm, const path_type& absm) + { + if (compiledbs.empty ()) + return; + + const scope& rs (*bs.root_scope ()); + const auto* m (rs.find_module (core_module::name)); + + assert (m != nullptr); + + assert (relo.empty () == abso.empty () && + relm.empty () == absm.empty ()); + + for (const unique_ptr& db: compiledbs) + { + if (filter (rs, *m, db->name, ot, it)) + db->execute (ot, op, it, ip, cpath, args, relo, abso, relm, absm); + } + } + + void + compiledb_pre (context& ctx, action a, const action_targets&) + { + // Note: won't be registered if compiledbs is empty. + + // Note: may be called directly with empty action_targets. + + assert (a.inner_action () == perform_update_id); + + tracer trace ("cc::compiledb_pre"); + + bool mctx (ctx.module_context == &ctx); + + l6 ([&]{trace << (mctx ? "module" : "normal") << " context " << &ctx;}); + + for (const unique_ptr& db: compiledbs) + db->pre (ctx); + } + + void + compiledb_post (context& ctx, + action a, + const action_targets& ts, + bool failed) + { + // Note: won't be registered if compiledbs is empty. + + assert (a.inner_action () == perform_update_id); + + tracer trace ("cc::compiledb_post"); + + bool mctx (ctx.module_context == &ctx); + + l6 ([&]{trace << (mctx ? "module" : "normal") << " context " << &ctx + << ", failed: " << failed;}); + + for (const unique_ptr& db: compiledbs) + db->post (ctx, ts, failed); + } + +#ifndef BUILD2_BOOTSTRAP + + namespace json = butl::json; + + // compiledb_stdout + // + compiledb_stdout:: + compiledb_stdout (string n) + : compiledb (move (n), path_type ()), + state_ (state::init), + nesting_ (0), + js_ (cout, 0 /* indentation */, "" /* multi_value_separator */) + { + } + + void compiledb_stdout:: + pre (context&) + { + // If the previous operation batch failed, then we shouldn't be here. + // + assert (state_ != state::failed); + + // The module context (used to build build system modules) poses a + // problem: we can receive its callbacks before the main context's or + // nested in the pre/post calls of the main context (or both, in + // fact). Plus there may be multiple pre/post sequences corresponding to + // the module context of both kinds. The three distinct cases are: + // + // 1. Module is loaded as part of the initial buildfile load (e.g., from + // root.build) -- in this case we will observe module pre/post before + // the main context's pre/post. + // + // In fact, to be precise, we will only observe them if cc is loaded + // before such a module. + // + // 2. Module is loaded via the interrupting load (e.g., from a directory + // buildfile that is loaded implicitly during match) -- in this case + // we will observe pre/post calls nested into the main context's + // pre/post. + // + // 3. The module context is used to build an ad hoc C++ recipe -- in + // this case we also get nested calls like in (2) since this happens + // during the recipe's match(). + // + // One thing to keep in mind (and which we rely upon quite a bit below) + // is that the main context's post will always be last (within any given + // operation; there could be another for the subsequent operation in a + // batch). + // + // Handling the nested case is relatively straightforward: we can keep + // track and ignore all the nested calls. + // + // The before case is where things get complicated. We could "take" the + // first module pre call and then wait until the main post, unless we + // see a module post call with failed=true, in which case there will be + // no further pre/post calls. There is, however, a nuance: the module is + // loaded and build for any operation, not just update, which means that + // if the main operation is not update (say, it's clean), we won't see + // any of the main context's pre/post calls. + // + // The way we are going to resolve this problem is different for the + // stdout and file implementations: + // + // For stdout we will just say that it should only be used with the + // update operation. There is really no good reason to use it with + // anything else anyway. See compiledb_stdout::post() for additional + // details. + // + // For file we will rely on its persistence and simply close and reopen + // the database for each pre/post sequence, the same way as if they were + // separate operations in a batch. + // + if (nesting_++ != 0) // Nested pre() call. + return; + + if (state_ == state::init) // First pre() call. + { + state_ = state::empty; + cout << "[\n"; + } + } + + bool compiledb_stdout:: + match (const file&, const path_type&, bool) + { + return true; + } + + static inline const char* + rel_to_abs (const char* a, + const string& rs, const string& as, + string& buf) + { + if (size_t rn = rs.size ()) + { + size_t an (strlen (a)); + + if (an >= rn && rs.compare (0, rn, a, rn) == 0) + { + if (an == rn) + return as.c_str (); + + buf = as; + buf.append (a + rn, an - rn); + + return buf.c_str (); + } + } + + return nullptr; + } + + void compiledb_stdout:: + execute (const file&, const path_type& op, + const file&, const path_type& ip, + const process_path& cpath, const cstrings& args, + const path_type& relo, const path_type& abso, + const path_type& relm, const path_type& absm) + { + const string& ro (relo.string ()); + const string& ao (abso.string ()); + + const string& rm (relm.string ()); + const string& am (absm.string ()); + + mlock l (mutex_); + + switch (state_) + { + case state::full: + { + cout << ",\n"; + break; + } + case state::empty: + { + state_ = state::full; + break; + } + case state::failed: + return; + case state::init: + assert (false); + return; + } + + try + { + // Duplicate what we have in the file implementation (instead of + // factoring it out to something common) in case here we need to + // adjust things (change order, omit some values; for example to + // accommodate broken consumers). We have this freedom here but not + // there. + // + js_.begin_object (); + { + js_.member ("output", op.string ()); + js_.member ("file", ip.string ()); + + js_.member_begin_array ("arguments"); + { + string buf; // Reuse. + for (auto b (args.begin ()), i (b), e (args.end ()); + i != e && *i != nullptr; + ++i) + { + const char* r; + + if (i == b) + r = cpath.effect_string (); + else + { + // Untranslate relative paths back to absolute. + // + const char* a (*i); + + if ((r = rel_to_abs (a, ro, ao, buf)) == nullptr && + (r = rel_to_abs (a, rm, am, buf)) == nullptr) + r = a; + } + + js_.value (r); + } + } + js_.end_array (); + + js_.member ("directory", work.string ()); + } + js_.end_object (); + } + catch (const json::invalid_json_output& e) + { + // There is no way (nor reason; the output will most likely be invalid + // anyway) to reuse the failed json serializer so make sure we ignore + // all the subsequent callbacks. + // + state_ = state::failed; + + l.unlock (); + + fail << "invalid compilation database json output: " << e; + } + } + + void compiledb_stdout:: + post (context& ctx, const action_targets&, bool failed) + { + assert (nesting_ != 0); + if (--nesting_ != 0) // Nested post() call. + return; + + bool mctx (ctx.module_context == &ctx); + + switch (state_) + { + case state::empty: + case state::full: + { + // If this is a module context's post, wait for the main context's + // post (last) unless the module load failed (in which case there + // will be no main pre/post). + // + // Note that there is no easy way to diagnose the case where we + // won't get the main pre/post calls. Instead, we will just produce + // invalid JSON (array won't be closed). In a somewhat hackish way, + // this actually makes the `b [-n] clean update` sequence work: we + // will take the pre() call from clean and the main post() from + // update. + // + if (mctx && !failed) + return; + + if (state_ == state::full) + cout << '\n'; + + cout << "]\n"; + break; + } + case state::failed: + return; + case state::init: + assert (false); + } + + state_ = state::init; + } + + // compiledb_file + // + compiledb_file:: + compiledb_file (string n, path_type p) + : compiledb (move (n), move (p)), + state_ (state::closed), + nesting_ (0) + { + } + + void compiledb_file:: + pre (context&) + { + // If the previous operation batch failed, then we shouldn't be here. + // + assert (state_ != state::failed); + + // See compiledb_stdout::pre() for background on dealing with the module + // context. Here are some file-specific nuances: + // + // We are going to load the database on the first pre call and flush + // (but not close) it on the matching post. Flushing means that we will + // update the file but still keep the in-memory state, in case there is + // another pre/post session coming. This is both a performance + // optimization but also the way we handle prunning no longer present + // entries, which gets tricky across multiple pre/post sessions (see + // post() for details). + // + if (nesting_++ != 0) // Nested pre() call. + return; + + if (state_ == state::closed) // First pre() call. + { + // Load the contents of the file if it exists, marking all the entries + // as (presumed) absent. + // + if (exists (path)) + { + uint64_t line (1); + try + { + ifdstream ifs (path, ifdstream::badbit); + + // Parse the top-level array manually (see post() for the expected + // format). + // + auto throw_invalid_input = [] (const string& d) + { + throw json::invalid_json_input ("", 0, 1, 0, d); + }; + + enum {first, second, next, last, end} s (first); + + for (string l; !eof (getline (ifs, l)); line++) + { + switch (s) + { + case first: + { + if (l != "[") + throw_invalid_input ("beginning of array expected"); + + s = second; + continue; + } + case second: + { + if (l == "]") + { + s = end; + continue; + } + + s = next; + } + // Fall through. + case next: + { + if (!l.empty () && l.back () == ',') + l.pop_back (); + else + s = last; + + break; + } + case last: + { + if (l != "]") + throw_invalid_input ("end of array expected"); + + s = end; + continue; + } + case end: + { + throw_invalid_input ("junk after end of array"); + } + } + + // Parse just the output target path, which must come first. + // + json::parser jp (l, "" /* name */); + + jp.next_expect (json::event::begin_object); + string op (move (jp.next_expect_member_string ("output"))); + + auto r (db_.emplace (move (op), entry {entry_status::absent, l})); + if (!r.second) + throw_invalid_input ( + "duplicate output value '" + r.first->first + '\''); + } + + if (s != end) + throw_invalid_input ("corrupt input text"); + } + catch (const json::invalid_json_input& e) + { + location l (path, line, e.column); + fail (l) << "invalid compilation database json input: " << e; + state_ = state::failed; + } + catch (const io_error& e) + { + fail << "unable to read " << path << ": " << e; + state_ = state::failed; + } + } + + absent_ = db_.size (); + changed_ = false; + + state_ = state::open; + } + } + + bool compiledb_file:: + match (const file&, const path_type& op, bool changed) + { + mlock l (mutex_); + + switch (state_) + { + case state::open: + break; + case state::failed: + return false; + case state::closed: + assert (false); + return false; + } + + // Mark an existing entry as present or changed. And if one does not + // exist, then (for now) as missing. + // + auto i (db_.find (op.string ())); + + if (i != db_.end ()) + { + entry& e (i->second); + + // Note: we can end up with present entries via the module context + // (see post() below). And we can see changed entries in a subsequent + // nested module context. + // + switch (e.status) + { + case entry_status::present: + case entry_status::changed: + assert (!changed); + break; + case entry_status::absent: + { + e.status = changed ? entry_status::changed : entry_status::present; + + absent_--; + changed_ = changed_ || (e.status == entry_status::changed); + break; + } + case entry_status::missing: + assert (false); + } + + return false; + } + else + { + db_.emplace (op.string (), entry {entry_status::missing, string ()}); + + changed_ = true; + + return true; + } + } + + void compiledb_file:: + execute (const file&, const path_type& op, + const file&, const path_type& ip, + const process_path& cpath, const cstrings& args, + const path_type& relo, const path_type& abso, + const path_type& relm, const path_type& absm) + { + const string& ro (relo.string ()); + const string& ao (abso.string ()); + + const string& rm (relm.string ()); + const string& am (absm.string ()); + + mlock l (mutex_); + + switch (state_) + { + case state::open: + break; + case state::failed: + return; + case state::closed: + assert (false); + return; + } + + auto i (db_.find (op.string ())); + + // We should have had the match() call before execute(). + // + assert (i != db_.end () && i->second.status != entry_status::absent); + + entry& e (i->second); + + if (e.status == entry_status::present) // Present and unchanged. + return; + + // The entry is either missing or changed. + // + try + { + e.json.clear (); + json::buffer_serializer js (e.json, 0 /* indentation */); + + js.begin_object (); + { + js.member ("output", op.string ()); // Note: must come first. + js.member ("file", ip.string ()); + + js.member_begin_array ("arguments"); + { + string buf; // Reuse. + for (auto b (args.begin ()), i (b), e (args.end ()); + i != e && *i != nullptr; + ++i) + { + const char* r; + + if (i == b) + r = cpath.effect_string (); + else + { + // Untranslate relative paths back to absolute. + // + const char* a (*i); + + if ((r = rel_to_abs (a, ro, ao, buf)) == nullptr && + (r = rel_to_abs (a, rm, am, buf)) == nullptr) + r = a; + } + + js.value (r); + } + } + js.end_array (); + + js.member ("directory", work.string ()); + } + js.end_object (); + } + catch (const json::invalid_json_output& e) + { + // There is no way (nor reason; the output will most likely be invalid + // anyway) to reuse the failed json serializer so make sure we ignore + // all the subsequent callbacks. + // + state_ = state::failed; + + l.unlock (); + + fail << "invalid compilation database json output: " << e; + } + + e.status = entry_status::changed; + } + + void compiledb_file:: + post (context& ctx, const action_targets& ts, bool failed) + { + assert (nesting_ != 0); + if (--nesting_ != 0) // Nested post() call. + return; + + switch (state_) + { + case state::open: + break; + case state::failed: + return; + case state::closed: + assert (false); + return; + } + + bool mctx (ctx.module_context == &ctx); + + tracer trace ("cc::compiledb_file::post"); + + // See if we need to update the file. + // + if (changed_) + l6 ([&]{trace << "updating due to missing/changed entries: " << path;}); + + // Don't prune the stale entries if the operation failed since we may + // not have gotten to execute some of them. + // + // And if this is a module context's post, then also don't prune the + // stale entries, instead waiting for the main context's post (if there + // will be one; this means we will only prune on update). + // + // Actually, this pruning business is even trickier than that: if we + // are not updating the entire project (say, rather only a subdirectory + // or even a specific target), then we will naturally not get any + // match/execute calls for targets of this project that don't get pulled + // into this build. Which means that we cannot just prune entries that + // we did not match/execute. It feels the correct semantics is to only + // prune the entries if they are in a subdirectory of the dir{} targets + // which we are building. + // + // What do we do about the module context, where we always update a + // specific libs{}? We could use its directory instead but that may lead + // to undesirable results. For example, if there are unit tests in the + // same directory, we will end up dropping their entries. It feels like + // the correct approach is to just ignore module context's entries + // entirely. If someone wants to prune the compilation database of a + // module, they will just need to update it directly (i.e., via the main + // context). Note that we cannot apply the same "simplification" to the + // changed entries since we will only observe the change once. + // + bool absent (false); + + if (!failed && !mctx && absent_ != 0) + { + // Pre-scan the entries and drop the appropriate absent ones. + // + for (auto i (db_.begin ()); i != db_.end (); ) + { + const entry& e (i->second); + + if (e.status == entry_status::absent) + { + // Absent entries should be rare enough during the normal + // development that we don't need to bother with caching the + // directories. + // + bool a (false); + for (const action_target& at: ts) + { + const target& t (at.as ()); + if (t.is_a ()) + { + const string& p (i->first); + const string& d (t.out_dir ().string ()); + + if (path_traits::sub (p.c_str (), p.size (), + d.c_str (), d.size ())) + { + // Remove this entry from the in-memory state so that it + // matches the file state. + // + i = db_.erase (i); + --absent_; + a = absent = true; + break; + } + } + } + + if (a) + continue; + } + + ++i; + } + } + + if (absent) + l6 ([&]{trace << "updating due to absent entries: " << path;}); + + try + { + auto_rmfile rm; + ofdstream ofs; + + bool u (changed_ || absent); // Update the file. + + if (u) + { + rm = auto_rmfile (path); + ofs.open (path); + + // We parse the top-level array manually (see pre() above) and the + // expected format is as follows: + // + // [ + // {"output":...}, + // ... + // {"output":...} + // ] + // + ofs.write ("[\n", 2); + } + + // Iterate over the entries resetting their status and writing them to + // the file if necessary. + // + bool first (true); + for (auto& p: db_) + { + entry& e (p.second); + + // First sort out the status also skipping appropriate entries. + // + switch (e.status) + { + case entry_status::absent: + { + // This is an absent entry that we should keep (see pre-scan + // above). + // + break; + } + case entry_status::missing: + { + // This should only happen if this operation has failed (see + // also below) or we are in the match-only mode. + // + assert (failed || ctx.match_only); + continue; + } + case entry_status::present: + case entry_status::changed: + { + // This is tricky: if this is a module context, then we don't + // want to mark the entries as absent since they will then get + // dropped by the main operation context. + // + if (mctx) + e.status = entry_status::present; + else + { + // Note: this is necessary for things to work across multiple + // operations in a batch. + // + e.status = entry_status::absent; + absent_++; + } + } + } + + if (u) + { + if (first) + first = false; + else + ofs.write (",\n", 2); + + ofs.write (e.json.c_str (), e.json.size ()); + } + } + + if (u) + { + ofs.write (first ? "]\n" : "\n]\n", first ? 2 : 3); + + ofs.close (); + rm.cancel (); + } + } + catch (const io_error& e) + { + fail << "unable to write to " << path << ": " << e; + state_ = state::failed; + return; + } + + // If this operation has failed, then our state may not be accurate + // (e.g., entries with missing status) but we also don't expect any + // further pre calls. Let's change out state to failed as a sanity + // check. + // + if (failed) + state_ = state::failed; + else + changed_ = false; + + // Note: keep in the open state (see pre() for details). + } + +#endif // BUILD2_BOOTSTRAP + } +} diff --git a/libbuild2/cc/compiledb.hxx b/libbuild2/cc/compiledb.hxx new file mode 100644 index 0000000..edfd1ee --- /dev/null +++ b/libbuild2/cc/compiledb.hxx @@ -0,0 +1,226 @@ +// file : libbuild2/cc/compiledb.hxx -*- C++ -*- +// license : MIT; see accompanying LICENSE file + +#ifndef LIBBUILD2_CC_COMPILEDB_HXX +#define LIBBUILD2_CC_COMPILEDB_HXX + +#include + +#ifndef BUILD2_BOOTSTRAP +# include +#endif + +#include +#include + +#include +#include +#include + +namespace build2 +{ + namespace cc + { + using compiledb_name_filter = vector, bool>>; + using compiledb_type_filter = vector, string>>; + + class compiledb + { + public: + // Match callback where we confirm an entry in the database and also + // signal whether it has changes (based on change tracking in depdb). + // Return true to force compilation of this target and thus make sure + // the below execute() is called (unless something before that failed). + // + // Besides noticing changes, this callback is also necessary to notice + // and delete entries that should no longer be in the database (e.g., a + // source file was removed from the project). + // + // Note that output is either obj*{}, bmi*{}, of hbmi*{}. + // + static bool + match (const scope& bs, + const file& output, const path& output_path, + const file& input, + bool changed); + + // Execute callback where we insert or update an entry in the database. + // + // The {relo, abso}, and {relm, absm} pairs are used to "untranslate" + // relative paths to absolute. Specifically, any argument that has rel? + // as a prefix has this prefix replaced with the corresponding abs?. + // Note that this means we won't be able to handle old MSVC and + // clang-cl, which don't support the `/F?: ` form, only + // `/F?`. Oh, well. Note also that either relo or relm (but not + // both) could be empty if unused. + // + // Note also that we assume the source file is always absolute and is + // the last argument. + // + static void + execute (const scope& bs, + const file& output, const path& output_path, + const file& input, const path& input_path, + const process_path& cpath, const cstrings& args, + const path& relo, const path& abso, + const path& relm, const path& absm); + + public: + using path_type = build2::path; + + string name; + path_type path; + + // The path is expected to be absolute and normalized or empty if the + // name is `-` (stdout). + // + compiledb (string n, path_type p) + : name (move (n)), path (move (p)) + { + } + + virtual void + pre (context&) = 0; + + virtual bool + match (const file& output, const path_type& output_path, + bool changed) = 0; + + virtual void + execute (const file& output, const path_type& output_path, + const file& input, const path_type& input_path, + const process_path& cpath, const cstrings& args, + const path_type& relo, const path_type& abso, + const path_type& relm, const path_type& absm) = 0; + + virtual void + post (context&, const action_targets&, bool failed) = 0; + + virtual + ~compiledb (); + }; + + using compiledb_set = vector>; + + // Populated by core_config_init() during serial load. + // + extern compiledb_set compiledbs; + + // Context operation callbacks. + // + void + compiledb_pre (context&, action, const action_targets&); + + void + compiledb_post (context&, action, const action_targets&, bool failed); + +#ifndef BUILD2_BOOTSTRAP + + // Implementation that writes to stdout. + // + // Note that this implementation forces compilation of all the targets for + // which it is called to make sure their entries are in the database. So + // typically used in the dry run mode. + // + class compiledb_stdout: public compiledb + { + public: + // The path is expected to be empty. + // + explicit + compiledb_stdout (string name); + + virtual void + pre (context&) override; + + virtual bool + match (const file& output, const path_type& output_path, + bool changed) override; + + virtual void + execute (const file& output, const path_type& output_path, + const file& input, const path_type& input_path, + const process_path& cpath, const cstrings& args, + const path_type& relo, const path_type& abso, + const path_type& relm, const path_type& absm) override; + + virtual void + post (context&, const action_targets&, bool failed) override; + + private: + mutex mutex_; + enum class state {init, empty, full, failed} state_; + size_t nesting_; + butl::json::stream_serializer js_; + }; + + // Implementation that maintains a file. + // + class compiledb_file: public compiledb + { + public: + compiledb_file (string name, path_type path); + + virtual void + pre (context&) override; + + virtual bool + match (const file& output, const path_type& output_path, + bool changed) override; + + virtual void + execute (const file& output, const path_type& output_path, + const file& input, const path_type& input_path, + const process_path& cpath, const cstrings& args, + const path_type& relo, const path_type& abso, + const path_type& relm, const path_type& absm) override; + + virtual void + post (context&, const action_targets&, bool failed) override; + + private: + mutex mutex_; + enum class state {closed, open, failed} state_; + size_t nesting_; + + // We want to optimize the performance for the incremental update case + // where only a few files will be recompiled and most of the time there + // will be no change in the command line, which means we won't need to + // rewrite the file. + // + // As a result, our in-memory representation is a hashmap (we could have + // thousands of entries) of absolute and normalized output file paths + // (stored as strings for lookup efficiency) to their serialized JSON + // text lines plus the status: absent, present, changed, or missing + // (entry should be there but is not). This way we don't waste + // (completely) parsing (and re-serializing) each line knowing that we + // won't need to touch most of them. + // + // In fact, we could have gone even further and used a sorted vector + // since insertions will be rare in this case. But we will need to + // lookup every entry on each update, so it's unclear this is a win. + // + enum class entry_status {absent, present, changed, missing}; + + struct entry + { + entry_status status; + string json; + }; + + using map_type = std::unordered_map; + map_type db_; + + // Number/presence of various entries in the database (used to determine + // whether we need to update the file without iterating over all the + // entries). + // + size_t absent_; // Number of absent entries. + bool changed_; // Presence of changed or missing entries. + }; + +#endif // BUILD2_BOOTSTRAP + } +} + +#endif // LIBBUILD2_CC_COMPILEDB_HXX diff --git a/libbuild2/cc/init.cxx b/libbuild2/cc/init.cxx index e124450..1ddeca8 100644 --- a/libbuild2/cc/init.cxx +++ b/libbuild2/cc/init.cxx @@ -10,8 +10,10 @@ #include +#include #include #include +#include using namespace std; using namespace butl; @@ -23,7 +25,7 @@ namespace build2 // Scope operation callback that cleans up module sidebuilds. // static target_state - clean_module_sidebuilds (action, const scope& rs, const dir&) + clean_module_sidebuilds (const scope& rs) { context& ctx (rs.ctx); @@ -67,6 +69,81 @@ namespace build2 return target_state::unchanged; } + // Scope operation callback that cleans up compilation databases. + // + static target_state + clean_compiledb (const scope& rs) + { + context& ctx (rs.ctx); + + target_state r (target_state::unchanged); + + for (const unique_ptr& db: compiledbs) + { + const path& p (db->path); + + if (p.empty () || + ctx.scopes.find_out (p.directory ()).root_scope () != &rs) + continue; + + if (rmfile (ctx, p)) + r = target_state::changed; + } + + return r; + } + + // Scope operation callback for cleaning module sidebuilds and compilation + // databases. + // + static target_state + clean_callback (action, const scope& rs, const dir&) + { + target_state r (clean_module_sidebuilds (rs)); + + if (!compiledbs.empty ()) + r |= clean_compiledb (rs); + + return r; + } + + // Custom save function that completes relative paths in the + // config.cc.compiledb and config.cc.compiledb.name values. + // + static pair + save_compiledb_name (const scope&, + const value& v, + const value*, + names& storage) + { + const names& ns (v.as ()); // Value is untyped. + + if (find_if (ns.begin (), ns.end (), + [] (const name& n) {return n.pair;}) == ns.end ()) + { + return make_pair (names_view (ns), "="); + } + + storage = ns; + for (auto i (storage.begin ()); i != storage.end (); ++i) + { + if (i->pair) + { + name& n (*++i); + + if (!n.directory ()) + n.canonicalize (); + + if (n.dir.relative ()) + n.dir.complete (); + + n.dir.normalize (); + } + } + + return make_pair (names_view (storage), "="); + } + bool core_vars_init (scope& rs, scope&, @@ -107,6 +184,22 @@ namespace build2 vp.insert ("config.cc.pkgconfig.sysroot"); + // Compilation database. + // + // See the manual for the semantics. + // + // config.cc.compiledb -- [@] (untyped) + // config.cc.compiledb.name -- [@]... (untyped) + // config.cc.compiledb.filter -- [@]... + // config.cc.compiledb.filter.input -- [@]... + // config.cc.compiledb.filter.output -- [@]... + // + vp.insert ("config.cc.compiledb"); + vp.insert ("config.cc.compiledb.name"); + vp.insert ("config.cc.compiledb.filter"); + vp.insert ("config.cc.compiledb.filter.input"); + vp.insert ("config.cc.compiledb.filter.output"); + vp.insert ("cc.poptions"); vp.insert ("cc.coptions"); vp.insert ("cc.loptions"); @@ -192,16 +285,6 @@ namespace build2 // vp.insert ("cc.serialize"); - // Register scope operation callback. - // - // It feels natural to clean up sidebuilds as a post operation but that - // prevents the (otherwise-empty) out root directory to be cleaned up - // (via the standard fsdir{} chain). - // - rs.operation_callbacks.emplace ( - perform_clean_id, - scope::operation_callback {&clean_module_sidebuilds, nullptr /*post*/}); - return true; } @@ -292,6 +375,8 @@ namespace build2 assert (first); + context& ctx (rs.ctx); + // Load cc.core.guess. // load_module (rs, rs, "cc.core.guess", loc); @@ -312,7 +397,6 @@ namespace build2 // // @@ Same nonsense as in module. // - // rs.assign ("cc.poptions") += cast_null ( lookup_config (rs, "config.cc.poptions", nullptr)); @@ -363,21 +447,16 @@ namespace build2 if (!cast_false (rs["bin.config.loaded"])) { // Prepare configuration hints (pretend it belongs to root scope). - // They are only used on the first load of bin.config so we only - // populate them on our first load. // variable_map h (rs); - if (first) - { - // Note that all these variables have already been registered. - // - h.assign ("config.bin.target") = - cast (rs["cc.target"]).representation (); + // Note that all these variables have already been registered. + // + h.assign ("config.bin.target") = + cast (rs["cc.target"]).representation (); - if (auto l = extra.hints["config.bin.pattern"]) - h.assign ("config.bin.pattern") = cast (l); - } + if (auto l = extra.hints["config.bin.pattern"]) + h.assign ("config.bin.pattern") = cast (l); init_module (rs, rs, "bin.config", loc, false /* optional */, h); } @@ -386,7 +465,6 @@ namespace build2 // ourselves since the target can come from the configuration and not // our hint). // - if (first) { const auto& ct (cast (rs["cc.target"])); const auto& bt (cast (rs["bin.target"])); @@ -416,6 +494,399 @@ namespace build2 if (tsys == "mingw32") load_module (rs, rs, "bin.rc.config", loc); + // Find the innermost outer core_module, if any. + // + const core_module* om (nullptr); + for (const scope* s (&rs); + (s = s->parent_scope ()->root_scope ()) != nullptr; ) + { + if ((om = s->find_module (core_module::name)) != nullptr) + break; + } + + auto& m (extra.set_module (new core_module (om))); + + // config.cc.compiledb.* + // + { + // For config.cc.compiledb and config.cc.compiledb.name we only + // consider a value in this root scope (if it's inherited from the + // outer scope, then that's where it will be handled). One special + // case is when it's specified on a scope that doesn't load the cc + // module (including, ultimately, the global scope for a global + // override). We handle it by assuming the value belongs to the + // outermost amalgamation that loads the cc module. + // + // Note: cache the result. + // + auto find_outermost = + [&rs, o = optional> ()] () mutable + { + if (!o) + { + o = pair (&rs, nullptr); + for (scope* s (&rs); + (s = s->parent_scope ()->root_scope ()) != nullptr; ) + { + if (auto* m = s->find_module (core_module::name)) + { + o->first = s; + o->second = m; + } + } + } + + return *o; + }; + + auto belongs = [&rs, &find_outermost] (const lookup& l) + { + return l.belongs (rs) || find_outermost ().first == &rs; + }; + + // Add compilation databases specified in ns as [@] pairs, + // appending their names to cdb_names. If is absent, then place + // the database into the base directory. Return the last added name. + // + auto add_cdbs = [&ctx, + &loc, + &trace] (strings& cdb_names, + const names& ns, + const dir_path& base) -> const string& + { + // Check that names and paths match. Return false if this entry + // already exist. + // + // Note that before we also checked that the same paths are not used + // across contexts. But, actually, there doesn't seem to be anything + // wrong with that and this can actually be useful, for example, + // when developing build system modules. + // + auto check = [&loc] (const string& n, const path& p) + { + for (const unique_ptr& db: compiledbs) + { + bool nm (db->name == n); + bool pm (db->path == p); + + if (nm != pm) + fail (loc) << "inconsistent compilation database names/paths" << + info << p << " is called " << n << + info << db->path << " is called " << db->name; + + if (nm) + return false; + } + + return true; + }; + + const string* r (&empty_string); + + bool reg (false); + size_t j (compiledbs.size ()); // First newly added database. + for (auto i (ns.begin ()); i != ns.end (); ++i) + { + // Each element has the [@] form. + // + // The special `-` signifies stdout. + // + // If is absent, then the file is called .json and + // placed into the output directory of the amalgamation or project + // root scope (passed as the base argument). + // + // If is (syntactically) a directory, then the file path is + // /.json. + // + if (!i->simple () || i->empty ()) + fail (loc) << "invalid compilation database name '" << *i << "'"; + + string n (i->value); + + path p; + if (i->pair) + { + ++i; + + if (n == "-") + fail (loc) << "compilation database path specified for stdout " + << "name"; + try + { + if (i->directory ()) + p = i->dir / n + ".json"; + else if (i->file ()) + { + if (i->dir.empty ()) + p = path (i->value); + else + p = i->dir / i->value; + } + else + throw invalid_path (""); + + if (p.relative ()) + p.complete (); + + p.normalize (); + } + catch (const invalid_path&) + { + fail (loc) << "invalid compilation database path '" << *i + << "'"; + } + } + else if (n != "-") + { + p = base / n + ".json"; + } + + if (check (n, p)) + { + reg = compiledbs.empty (); // First time. + +#ifdef BUILD2_BOOTSTRAP + fail (loc) << "compilation database requested during bootstrap"; +#else + if (n == "-") + compiledbs.push_back ( + unique_ptr ( + new compiledb_stdout (n))); + else + compiledbs.push_back ( + unique_ptr ( + new compiledb_file (n, move (p)))); +#endif + } + + // We may end up with duplicates via the config.cc.compiledb + // logic. + // + auto k (find (cdb_names.begin (), cdb_names.end (), n)); + + if (k == cdb_names.end ()) + { + cdb_names.push_back (move (n)); + r = &cdb_names.back (); + } + else + r = &*k; + } + + // Register context operation callback for compiledb generation. + // + // We have two complications here: + // + // 1. We could be performing all this from the load phase that + // interrupted the match phase, which means the point where the + // pre callback would have been called is already gone (but the + // post callback will still be called). This will happen if we, + // say, import a project that has a compilation database from a + // project that doesn't. + // + // (Note that if you think that this can be solved by simply + // always registering the callbacks, regardless of whether we + // have any databases or not, consider a slightly different + // scenario where we import a project that loads the cc module + // from a project that does not). + // + // What we are going to do in this case is simply call the pre + // callback manually. + // + // 2. We could again be performing all this from the load phase that + // interrupted the match phase, but this time the pre callback + // has already been called, which means there will be no pre() + // call for the newly added database(s). This will happen if we, + // say, import a project that has a compilation database from a + // project that also has one. + // + // Again, what we are going to do in this case is simply call the + // pre callback for the new database(s) manually. + // + if (reg) + ctx.operation_callbacks.emplace ( + perform_update_id, + context::operation_callback {&compiledb_pre, &compiledb_post}); + + if (ctx.load_generation > 1) + { + action a (ctx.current_action ()); + + if (a.inner_action () == perform_update_id) + { + if (reg) // Case #1. + { + l6 ([&]{trace << "direct compiledb_pre for context " << &ctx;}); + compiledb_pre (ctx, a, action_targets {}); + } + else // Case #2. + { + size_t n (compiledbs.size ()); + + if (j != n) + { + l6 ([&]{trace << "additional compiledb for context " << &ctx;}); + + for (; j != n; ++j) + compiledbs[j]->pre (ctx); + } + } + } + } + + return *r; + }; + + lookup l; + + // config.cc.compiledb + // + // The semantics of this value is as follows: + // + // Location: outermost amalgamation that loads the cc module. + // Name filter: enable from this scope unless specified explicitly. + // Type filter: enable from this scope unless specified explicitly. + // + // Note: save omitted. + // + optional enable_filter; + + l = lookup_config (rs, "config.cc.compiledb", 0, &save_compiledb_name); + if (l && belongs (l)) + { + l6 ([&]{trace << "config.cc.compiledb specified on " << rs;}); + + const names& ns (cast (l)); + + // Make sure it's one name/path. + // + if (ns.empty () || ns.size () != (ns.front ().pair ? 2 : 1)) + fail (loc) << "invalid compilation database name '" << ns << "'"; + + // We inject the database directly into the outer amalgamation's + // module, as-if config.cc.compiledb.name was specified in its + // scope. Unless there isn't one, in which case it's us. + // + pair p (find_outermost ()); + + // Save the name for the name filter below. + // + enable_filter = add_cdbs ( + (p.second != nullptr ? *p.second : m).cdb_names_, + ns, + p.first->out_path ()); + } + + // config.cc.compiledb.name + // + // Note: save omitted. + // + l = lookup_config (rs, + "config.cc.compiledb.name", + 0, + &save_compiledb_name); + if (l && belongs (l)) + { + l6 ([&]{trace << "config.cc.compiledb.name specified on " << rs;}); + + add_cdbs (m.cdb_names_, cast (l), rs.out_path ()); + } + + // config.cc.compiledb.filter + // + // Note: save omitted. + // + l = lookup_config (rs, "config.cc.compiledb.filter"); + if (l && belongs (l)) // Custom. + { + m.cdb_filter_ = &cast (l); + } + else if (enable_filter) // Override. + { + // Inherit outer filter. + // + if (om != nullptr && om->cdb_filter_ != nullptr) + m.cdb_filter_storage_ = *om->cdb_filter_; + + m.cdb_filter_storage_.emplace_back (*enable_filter, true); + m.cdb_filter_ = &m.cdb_filter_storage_; + } + else if (om != nullptr) // Inherit. + { + m.cdb_filter_ = om->cdb_filter_; + } + + // config.cc.compiledb.filter.input + // config.cc.compiledb.filter.output + // + // Note that filtering happens before we take into account the change + // status, which means for larger projects there would be a lot of + // targets to filter even during the incremental update. So it feels + // it would have been better to pre-lookup the target types. However, + // the targets that would normally be used are registered by other + // modules (bin, c/cxx) and which haven't been loaded yet. So instead + // we try to optimize the lookup for the commonly used targets. + // + // Note: save omitted. + // + l = lookup_config (rs, "config.cc.compiledb.filter.input"); + if (l && belongs (l)) // Custom. + { + m.cdb_filter_input_ = &cast (l); + } + else if (enable_filter) // Override. + { + // Inherit outer filter. + // + if (om != nullptr && om->cdb_filter_input_ != nullptr) + { + m.cdb_filter_input_storage_ = *om->cdb_filter_input_; + m.cdb_filter_input_storage_.emplace_back (*enable_filter, "target"); + m.cdb_filter_input_ = &m.cdb_filter_input_storage_; + } + else + m.cdb_filter_input_ = nullptr; // Enable all. + } + else if (om != nullptr) // Inherit. + { + m.cdb_filter_input_ = om->cdb_filter_input_; + } + + l = lookup_config (rs, "config.cc.compiledb.filter.output"); + if (l && belongs (l)) // Custom. + { + m.cdb_filter_output_ = &cast (l); + } + else if (enable_filter) // Override. + { + // Inherit outer filter. + // + if (om != nullptr && om->cdb_filter_output_ != nullptr) + { + m.cdb_filter_output_storage_ = *om->cdb_filter_output_; + m.cdb_filter_output_storage_.emplace_back (*enable_filter, "target"); + m.cdb_filter_output_ = &m.cdb_filter_output_storage_; + } + else + m.cdb_filter_output_ = nullptr; // Enable all. + } + else if (om != nullptr) // Inherit. + { + m.cdb_filter_output_ = om->cdb_filter_output_; + } + } + + // Register scope operation callback for cleaning module sidebuilds and + // compilation databases. + // + // It feels natural to clean this stuff up as a post operation but that + // prevents the (otherwise-empty) out root directory to be cleaned up + // (via the standard fsdir{} chain). + // + rs.operation_callbacks.emplace ( + perform_clean_id, + scope::operation_callback {&clean_callback, nullptr /*post*/}); + return true; } diff --git a/libbuild2/cc/module.cxx b/libbuild2/cc/module.cxx index cf6c6e4..a3c64d9 100644 --- a/libbuild2/cc/module.cxx +++ b/libbuild2/cc/module.cxx @@ -22,6 +22,12 @@ namespace build2 { namespace cc { + // cc.core_module + // + const string core_module::name ("cc.core.config"); + + // x.config_module + // void config_module:: guess (scope& rs, const location& loc, const variable_map&) { @@ -891,6 +897,9 @@ namespace build2 config::save_environment (rs, xi.platform_environment); } + // x module + // + // Global cache of ad hoc importable headers. // // The key is a hash of the system header search directories diff --git a/libbuild2/cc/module.hxx b/libbuild2/cc/module.hxx index 2ef07d6..d4e9a67 100644 --- a/libbuild2/cc/module.hxx +++ b/libbuild2/cc/module.hxx @@ -14,6 +14,8 @@ #include +#include + #include #include #include @@ -27,6 +29,35 @@ namespace build2 { struct compiler_info; + // cc.core module + // + class core_module: public build2::module + { + public: + static const string name; + + explicit + core_module (const core_module* om) + : outer_module_ (om) + { + } + + public: + const core_module* outer_module_; + + strings cdb_names_; + + const compiledb_name_filter* cdb_filter_ = nullptr; + const compiledb_type_filter* cdb_filter_input_ = nullptr; + const compiledb_type_filter* cdb_filter_output_ = nullptr; + + compiledb_name_filter cdb_filter_storage_; + compiledb_type_filter cdb_filter_input_storage_; + compiledb_type_filter cdb_filter_output_storage_; + }; + + // x.config module + // class LIBBUILD2_CC_SYMEXPORT config_module: public build2::module, public config_data { @@ -153,6 +184,8 @@ namespace build2 msvc_library_search_dirs (const compiler_info&, scope&) const; }; + // x module + // class LIBBUILD2_CC_SYMEXPORT module: public build2::module, public virtual common, public link_rule, @@ -162,7 +195,6 @@ namespace build2 public predefs_rule { public: - explicit module (data&& d, const scope& rs) : common (move (d)), link_rule (move (d)), diff --git a/libbuild2/cc/pkgconfig.cxx b/libbuild2/cc/pkgconfig.cxx index ecef61c..79a38ea 100644 --- a/libbuild2/cc/pkgconfig.cxx +++ b/libbuild2/cc/pkgconfig.cxx @@ -1,6 +1,8 @@ // file : libbuild2/cc/pkgconfig.cxx -*- C++ -*- // license : MIT; see accompanying LICENSE file +#include + #include #include #include @@ -18,7 +20,6 @@ #include #include -#include #include #include -- cgit v1.1