From 9939f1721a3bf4fca69ae87bc7bd9fc8ac407f83 Mon Sep 17 00:00:00 2001 From: Boris Kolpackov Date: Wed, 19 Jun 2024 08:30:01 +0200 Subject: Updates for 0.17.0 release --- doc/release.cli | 149 +++++++++++++++++++++----------------------------------- 1 file changed, 56 insertions(+), 93 deletions(-) (limited to 'doc') diff --git a/doc/release.cli b/doc/release.cli index 78d505f..c387714 100644 --- a/doc/release.cli +++ b/doc/release.cli @@ -23,7 +23,8 @@ Consider how/when they are updated/tested during the release process. @@ We currently have an issue in that \c{queue} builds \c{public} using \c{public} \c{buildtabs} (since it's querying \c{public} brep) which means existing packages are not tested with new build configurations. But maybe -that's correct, conceptually. +that's correct, conceptually. We also have the inverse problem: stage bots +may no longer have the machines to build public. \h1#stage|Stage| @@ -37,7 +38,7 @@ and then be queued and published (effectively released) as part of the bundle the release of dependencies with the release of \c{build2} to keep the process as streamlined as possible. In fact, we now have \c{queue.stage} (see \c{etc/stage-queue}) which is the place for such \"extra packages for -testing\". +testing (or that require the staged toolchain)\". \N|When unbundling the release of a dependency we need to remove its distribution from \c{etc/stage} and add the pre-distributed packages @@ -125,7 +126,8 @@ distribution from \c{etc/stage} and add the pre-distributed packages \h#packaging|Release \c{packaging/} dependencies| - Release dependencies that have the snapshot version as described in + Release dependencies mentioned in \c{etc/stage} that have the snapshot + version as described in \l{https://github.com/build2-packaging/README#version-and-release-management Version and Release Management}. @@ -135,6 +137,8 @@ distribution from \c{etc/stage} and add the pre-distributed packages publish) these now and other dependencies later? Maybe so that we can stage them one more time?| + Note: may want to update dependencies bundled as \c{git} submodules after + that. \h#dependencies|Finalize all other dependencies| @@ -161,38 +165,24 @@ distribution from \c{etc/stage} and add the pre-distributed packages etc/upgrade \ - Or, if released ODB on the previous step, update \c{libodb*} version - constraint using \c{etc/version}, commit, and then: + If released ODB on the previous step: \ # Step 0: make sure b, bpkg, bdep are runnable. - # Step 1a: pull CLI compiler and build it, make sure runnable. - # Step 1b: pull ODB compiler and build it, make sure runnable. - - # Step 2: pull everything in build2 (including brep). - - # Step 3: upgrade (in configure-only mode). - # - # If this step goes sideways, use the saved .bak configurations to - # revert, fix the issue, and try again. If unable to fix the issue - # (for example, the toolchain is not runnable), then do the from- - # scratch bootstrap using the etc/bootstrap script. - # - etc/upgrade -c - - # Step 4: trigger header regeneration (ignore ODB version errors). - # - BDEP_SYNC=0 b --match-only ~/work/build2/builds/gcc7/ - - # Step 5: regenerated ODB code in the relevant projects (bpkg, bdep, brep): - # - ./odb.sh ~/work/build2/builds/gcc7/ - - # Step 6: finish toolchain update: - # - BDEP_SYNC=0 b build2/ bpkg/ bdep/ - b build2/ bpkg/ bdep/ # Should be noop. + # Step 1a: update odb submodule in libbutl (see README-DEV) + # Step 1b: run odb.sh in bpkg, bdep. + # Step 1c: update b, bpkg, bdep. + # Step 1d: copy *-odb.?xx for bpkg and bdep to build2-toolchain. + + # Step 2a: update ODB version in etc/version + # Step 2b: run etc/version (should only change brep) + # Step 2c: commit the changes to brep + # Step 2d: run bdep sync -f (should upgrade libodb*) + # Step 2e: manually update version.hxx in libodb, libodb-pgsql, + # and libbrep by running b .../hxx{version} + # Step 2f: run odb.sh ib brep/libbrep + # Step 2g: update brep \ Then push \c{build2} repositories. @@ -226,10 +216,13 @@ distribution from \c{etc/stage} and add the pre-distributed packages diff -u intro2-tldr.orig intro2-tldr.out # Or use gitk. mv intro2-tldr.out intro2-tldr.orig + # NOTE: comment out !config.import.libbuild2_hello in ~/.build2/b.options script -qc ./intro2-tour intro2-tour.out && sed -i -e 's/\r//g' intro2-tour.out diff -u intro2-tour.orig intro2-tour.out # Or use gitk. mv intro2-tour.out intro2-tour.orig + + # NOTE: uncomment !config.import.libbuild2_hello in ~/.build2/b.options \ \h#doc|Review documentation| @@ -370,16 +363,16 @@ distribution from \c{etc/stage} and add the pre-distributed packages \h#test-extra|Perform extra testing| - CI: (check for any new repositories in github.com/build2/)\n + CI: (check for any new repositories in \c{github.com/build2/})\n \n \c{libauto-symexport}\n \c{hello-thrift}\n \c{assembler-with-cpp}\n - Test \c{cxx20-modules-examples} (see \c{test} script). + Test \c{cxx20-modules-examples} (see \c{test} script) and \c{async_simple}. Test any third-party/demos (\c{build2-dynamic-module-demo}, - \c{cherimcu}, \c{boost-dependency}). + \c{cherimcu}, \c{cherio-rtos}, \c{boost-dependency}). Test on ARM Mac (run tests for \c{libbutl/build2/bpkg/bdep}). @@ -472,7 +465,7 @@ distribution from \c{etc/stage} and add the pre-distributed packages \ etc/version - ./commit.sh + ./commit.sh # \"Release version X.Y.Z\" git -C build2-toolchain commit --amend # \"Change version to X.Y.Z\" \ @@ -499,7 +492,8 @@ distribution from \c{etc/stage} and add the pre-distributed packages pre-installed build system modules, use \c{BDEP_SYNC=0}).| \li|Upgrade all dependencies in configure-only mode by executing - \c{etc/upgrade\ -c}. + \c{etc/upgrade\ -c} (don't skip this step even if all the dependencies + were released during staging). Avoid this (see above): If the \c{build2}/\c{bpkg} requirements in the manifests have been bumped to the version being released, then first @@ -519,23 +513,24 @@ distribution from \c{etc/stage} and add the pre-distributed packages to \"close off\"): \ - BDEP_SYNC=0 b --match-only ~/work/build2/builds/gcc7-asan/ + BDEP_SYNC=0 b --match-only ~/work/build2/builds/gcc/ \ If using GCC prior to 8 then might also need explicit version target upgrades: \ - BDEP_SYNC=0 b ~/work/build2/builds/gcc7-asan/.../hxx{version} + BDEP_SYNC=0 b ~/work/build2/builds/gcc/.../hxx{version} \ | \li|Regenerate ODB in relevant packages passing upgraded configuration - path explicitly (\c{bdep} is not runnable): + path explicitly (\c{bdep} is not runnable; can skip if ODB was + released during staging): \ - ./odb.sh ~/work/build2/builds/gcc7-asan/ + ./odb.sh ~/work/build2/builds/gcc/ \ | @@ -544,7 +539,7 @@ distribution from \c{etc/stage} and add the pre-distributed packages configuration: \ - BDEP_SYNC=0 b ~/work/build2/builds/gcc7-asan/ + BDEP_SYNC=0 b ~/work/build2/builds/gcc/ b build2/ bpkg/ bdep/ @@ -595,8 +590,8 @@ distribution from \c{etc/stage} and add the pre-distributed packages \ul| \li|Regenerate documentation in each package inside as well as in - \c{build2-toolchain} itself. @@ \c{libbuild-kconfig} not configured - out of tree? Or maybe it gets updated automatically during dist?| + \c{build2-toolchain} itself. Note: for \c{libbuild-kconfig} + it gets updated automatically during dist.| \li|Update ODB by copying relevant files from the previous step (trust me, this is the easy way for now). Make sure all \c{*-odb.*} are copied!| @@ -621,7 +616,9 @@ distribution from \c{etc/stage} and add the pre-distributed packages Sort non-alpha packages from \c{cppget.org/queue/1/alpha/} into appropriate sections (we could probably automate this similar to \c{bdep-release(1)}). - Also check if any of them are already in \c{public}. + Also check if any of them are already in \c{public}. Note that some + build system modules may already in \c{public}. If standard pre-installed, + then need to copy archives from \c{public} (so that checksums match). Note also that we assume all the packages already have the corresponding ownership information either in \c{queue} or \c{public}. However, if any @@ -672,7 +669,10 @@ distribution from \c{etc/stage} and add the pre-distributed packages After upgrade, drop all package builds for \c{public} and \c{queue} and verify there are no regressions. This makes sure that the \c{brep} services in the new version are usable with the old toolchain. If there are issues, - they have to be fixed by publishing/queuing revisions. + they have to be fixed by publishing/queuing revisions. Note that if + \c{public} was tested with staged toolchain (and thus \c{brep} was already + upgraded), perhaps this can be skipped (since it will take days to + completely rebuild \c{public}). \N|The \c{bdep} tests that exercise CI and publishing services do it in the simulation mode. To properly test that these services are compatible with @@ -731,68 +731,31 @@ distribution from \c{etc/stage} and add the pre-distributed packages \h#public-machines|Update \c{public} \c{buildtab}s and build machines| - Poweroff the old set of \c{public} build hosts: + Stop \c{public} build hosts: \ - ./po-hosts -c public + ./po-hosts -s public -c public \ Update \c{public} \c{buildtab}s based on the \c{queue} \c{buildtab} (normally just a copy). - Adjust build host configurations (hardware classes, etc) and add/remove - new/old build hosts. - - Replace the \c{public} \c{buildos} image on \c{build-cache} with the - one for \c{stage}. - - Comment out the \c{public} toolchain in the build host configuration - (effectively making it a no-toolchain configuration), regenerate, and power - on the new set of \c{public} build hosts. + Adjust \c{public} build host configurations (hardware classes, etc) and + add/remove new/old build hosts. + Use new sync scripts to update \c{public} build hosts with new VMs. - @@ See new sync scripts for this step: Review deployed machines against the - updated \c{public} \c{buildtab} and remove those that are no longer used: + Power off \c{public} build hosts: \ - cd private/buildos/ - - grep '.*' .../brep-buildtab | cut -d' ' -f1 | sort -u - ./ls-machines -c public - - ~/work/build2/buildos/remove-machine - \ - - Then move now legacy machines to the \"legacy\" build host: - - \ - grep 'legacy' .../brep-buildtab | cut -d' ' -f1 | sort -u - \ - - Also review deployed machines against the latest available versions and - upgrade those that are not the latest: - - \ - cd private/buildos/ - - ./ls-machines -l \"/btrfs/$(whoami)/machines/default/\" | sort - ./ls-machines -c public - - ~/work/build2/buildos/upload-machine .../new-ver .../old-ver - \ - - Finally, add any new machines: - - \ - grep -v 'legacy' .../brep-buildtab | cut -d' ' -f1 | sort -u + ./po-hosts -c public \ - Uncomment the \c{public} toolchain in the build host configuration and - regenerate. The only remaining step is to reboot (not yet): + Replace the \c{public} \c{buildos} image on \c{build-cache} with the + one for \c{stage} (note: this will cause build hosts to reboot, thus + power off above). - \ - ./po-hosts -r -c public - \ + The only remaining step is to boot \c{public} build hosts (not yet). \h#pub-dist|Publish distribution| -- cgit v1.1